臺灣博碩士論文加值系統

目錄
中文摘要 iii
ABSTRACTiv
致謝v
目錄vi
圖目錄viii
表目錄xiv
第一章 緒論1
1-1研究背景1
1-2文獻回顧3
1-3研究目的4
1-4 論文架構5
第二章 研究方法與理論6
2-1 光纖雷射6
2-1-1光纖雷射參數影響7
2-2 雷射切割9
2-2-1 雷射切割參數影響11
2-3 神經網路17
2-3-1機器學習(Machine Learning, ML)18
2-3-2深度學習(Deep Learning, DL)21
2-3-3深度學習演算法24
2-4 電腦視覺(Computer Vision, CV)27
2-4-1影像處理(image processing)27
2-5 響應曲面法(Response Surface Methodology, RSM)31
第三章 實驗設計32
3-1實驗流程32
3-2實驗設備34
3-3實驗參數38
3-4 機器學習模型訓練42
3-4-1 預測切口品質神經網路模型43
3-4-2切割表面影像生成62
3-5 影像生成預實驗68
3-6 雷射切割參數影響分析82
第四章 研究結果與討論83
4-1切割品質結果83
4-1-1光纖雷射切割品質量測83
4-1-2神經網路模型結構結果85
4-1-3 切割品質預測結果90
4-1-4切口寬度實驗數據分析95
4-1-5表面粗糙度值實驗數據分析108
4-2 切割表面影像結果121
第五章 結論及未來展望128
參考文獻130

[1].S.Ullah, et al, 2022, Influence of the fiber laser cutting parameters on the mechanical properties and cut− edge microfeatures of a AA2B06− T4 aluminum alloy, Optics & Laser Technology, Vol.156, 2022.
[2].P.Khatak, 2005, Laser cutting technique: A literature review, Materials Today: Proceedings, Vol.56 , pp.2484-2489.
[3].L.D. Scintilla, L.Tricarico,2013, Experimental investigation on fiber and CO2 inert gas fusion cutting of AZ31 magnesium alloy sheets, Optics & Laser Technology, Vol.46, pp. 42-52.
[4].D.Zhemchuzhnikova, J.Zollinger, 2023, Microstructure formation in 6061 aluminum alloy during nano-second pulsed laser processing, Journal of Materials Processing Technology, Vol.314.
[5].M. Milos, R. Miroslav, 2013, Application of the Taguchi method for optimization of laser cutting: a review, Revista de Tehnologii Neconventionale, Vol.17, pp.50-57.
[6].R. Adalarasan, M. Santhanakumar, M. Rajmohan, 2015, Optimization of laser cutting parameters for Al6061/SiCp/Al2O3 composite using grey based response surface methodology (GRSM), Measurement, Vol.73, pp.596-606
[7].張國順，2008，現代雷射製造技術，新文京開發出版股份有限公司，臺北，臺灣。
[8].A.Raspa, 2002, Ultrahigh-power laser cutting continues growth path, LASER FOCUS WORLD.
[9].P.Patel, B.S. Modi, S.Sheth, T. Patel, 2015, Experimental Investigation, Modelling and Comparison of Kerfwidth in Laser Cutting of GFRP, Bonfring International Journal of Industrial Engineering and Management Science, Vol.5.2, pp.55-62.
[10].H.S. Park, D.S. Nguyen, T. Le-Hong, 2022,Machine learning-based optimization of process parameters in selective laser melting for biomedical applications, Journal of Intelligent Manufacturing, Vol.33, pp. 1843-1858.
[11].A.I. Kusuma, Y.M. Huang, 2022, Performance comparison of machine learning models for kerf width prediction in pulsed laser cutting, The International Journal of Advanced Manufacturing Technology, Vol.123, pp.2703-2718.
[12].A.I. Kusuma, Y.M. Huang, 2022, Product quality prediction in pulsed laser cutting of silicon steel sheet using vibration signals and deep neural network, Journal of Intelligent Manufacturing, Vol.34, pp.1683-1699.
[13].金岡優，2014，雷射加工實務，全華圖書股份有限公司，臺北，臺灣。
[14].A.F. Courtier, M. McDonnell, M. Praeger, J.A. Grant-Jacob, C. Codemard, P. Harrison, B. Mills, M. Zervas, 2021,Modelling of fibre laser cutting via deep learning, Optics Express, Vol.29, pp.36487-36502.
[15].M. Madić , M. Radovanović ,2012, Comparative modeling of CO2 laser cutting using multiple regression analysis and artificial neural network, International Journal of Physical Sciences, Vol. 7, pp.2422-2430.
[16].A. Sharma, V. Yadava, 2018,Experimental analysis of Nd-YAG laser cutting of sheet materials–A review, Optics & Laser Technology, Vol.98, pp.264-280.
[17].A.K. Dube, V. Yadava,2008, Laser beam machining—A review, International Journal of Machine Tools and Manufacture, Vol. 48, pp.609-628.
[18].V.B. Magdum, J.K. Kittur, S.C. Kulkarni, 2022, Surface roughness optimization in laser machining of stainless steel 304 using response surface methodology, Materials Today: Proceedings, Vol.59, pp.540-546.
[19].雷增炊, 雷射加工物理基礎講義，網路資料。
[20].I.P. Tuersley, T.P. Hoult, I.R. Pashby, 1998, Nd–YAG laser machining of SiC fibre/borosilicate glass composites. Part II. The effect of process variables, Composites Part A: Applied Science and Manufacturing, Vol.29, pp.955-964.
[21].C. Wandera, A. Salminen, V. Kujanpaa, 2009, Inert gas cutting of thick-section stainless steel and medium-section aluminum using a high power fiber laser, Journal of laser applications, Vol. 21, pp.154-161.
[22].M.N. Zervas, C.A. Codemard, 2014, High power fiber lasers: a review, IEEE Journal of selected topics in Quantum Electronics, Vol.20, pp.219-241.
[23].C. Chen, M. Gao, M. Jiang, X. Zeng, 2016,Surface morphological features of fiber laser cutting of AA2219 aluminum alloy, International Journal of Advanced Manufacturing Technology, Vol.86, pp.1219-1226.
[24].L.D. Scintilla, 2014, Continuous-wave fiber laser cutting of aluminum thin sheets: effect of process parameters and optimization, Optical Engineering, Vol.53, pp.066113_1-06113_8.
[25].C.Chen, M. Gao, X. Zeng, 2016,Relationship between temperature at cut front edge and kerf quality in fiber laser cutting of Al–Cu aluminum alloy, International Journal of Machine Tools and Manufacture, Vol.109, pp.58-64.
[26].C. Chen, M. Gao, M. Jiang, X. Zeng, 2016, Surface morphological features of fiber laser cutting of AA2219 aluminum alloy, International Journal of Advanced Manufacturing Technology, Vol.86, pp.1219-1226.
[27].S.D. Rao B, A. Sethi, A.K. Das,2019, Fiber laser processing of GFRP composites and multi-objective optimization of the process using response surface methodology, Journal of Composite Materials, Vol.53, pp.1459-1473.
[28].Z. Wu, S.J. Wang, Y. Zhang, Y.L. Liu, L.J. Huang, R.Z. Wu, 2023, Effect of Laser Power on Processing Quality of AZ31B Magnesium Alloy, Journal of Materials Engineering and Performance, pp.1-9.
[29].Z. Wu, S.J. Wang, B. Xue, C.M. Yang, J.O. Wang, J.Y. Song, 2022, Effect of Laser Cutting Process Parameters on the Cutting Quality of AZ31B Magnesium Alloy, Journal of Materials Engineering and Performance, Vol.32, pp.5201-5210.
[30].P.A. Hiltion, 1997, Early days of laser cutting, Lasers in Material Processing, Vol.3097, pp.10-16.
[31].邱慶龍，2022，國際雷射產業發展與台灣雷射量點，機械工業雜誌，第467期，第10-14頁。
[32].A.N. Bakhiyarum, Z. Wang, L. Wang, H. Zheng,2020, A review on applications of artificial intelligence in modeling and optimization of laser beam machining, Optics & Laser Technology, Vol.135,106721.
[33].M. Madić, M. Radovanović, M. Gostimirović, 2015, ANN modeling of kerf transfer in CO2 laser cutting and optimization of cutting parameters using Monte Carlo method, International Journal of Industrial Engineering Computations, Vol. 6, pp. 33-42.
[34].A.K. Dubey, V. Yadava, 2008, Optimization of kerf quality during pulsed laser cutting of aluminium alloy sheet, Journal of materials processing technology, Vol.204, pp. 412-418.
[35].A. Stournaras, P. Stavropoulos, K. Salonitis, G. Chryssolouris, 2009, An investigation of quality in CO2 laser cutting of aluminum, CIRP Journal of Manufacturing Science and Technology, Vol.2, pp.61-69.
[36].N. Ahmed, A.M. Alahmari, S. Darwish, A.A. Khan,2016,Experimental investigation of micro-channels produced in aluminum alloy (AA 2024) through laser machining, Applied Physics A, Vol.122, pp.1-16.
[37].C. Leone, S. Genna, A. Caggiano, V. Tagliaferri, R. Molitierno,2016,Influence of process parameters on kerf geometry and surface roughness in Nd: YAG laser cutting of Al 6061T6 alloy sheet, The International Journal of Advanced Manufacturing Technology, Vol.87, pp.2745-2762.
[38].C. Lenoe, S. Genna, V. Tagliaferri, 2018, Cutting of AA6061 by a multimode pulsed Nd: YAG laser with high pressure gas: characterisation of kerf geometry and quality, The International Journal of Advanced Manufacturing Technology, Vol.94, pp.925-940.
[39].M. Sharifi, M. Akbari,2019, Experimental investigation of the effect of process parameters on cutting region temperature and cutting edge quality in laser cutting of AL6061T6 alloy, Optik, Vol.184, pp.457-463.
[40].J. Naskar, R. Kumar, S. Das, N. Roy, S. Paul, 2023, Experimental investigation of cutting parameters during laser beam machining of aluminum alloy 7075, Materials Today: Proceedings.
[41].S. Chaki, R.N. Bathe, S. Ghosal, G. Padmanabham, 2018,Multi-objective optimisation of pulsed Nd: YAG laser cutting process using integrated ANN–NSGAII model, Journal of Intelligent Manufacturing, Vol.29, pp.175-190.
[42].H. Tercan, T.A. Khawli, U. Eppelt, C. Büscher, T. Meisen, S. Jeschke,2017, Improving the laser cutting process design by machine learning techniques, Production Engineering, Vol. 11, pp.195-203.
[43].B. Mills, D. J. Heath, J. A. Grant-Jacob, R.W. Eason,2018, Predictive capabilities for laser machining via a neural network, Optics express, Vol. 26, pp.17245-17253.
[44].Y. Yongbin, S.A. Bagherzadeh, H. Azimy, M. Akbari, A.Karimipour, 2020, Comparison of the artificial neural network model prediction and the experimental results for cutting region temperature and surface roughness in laser cutting of AL6061T6 alloy, Infrared Physics & Technology, Vol.108, pp.103364.
[45].S. Prakash, S. Suman, 2021,Neural network-based prediction for surface characteristics in CO 2 laser micro-milling of glass fiber reinforced plastic composite, Neural Computing and Applications, Vol. 33, pp. 11517-11529.
[46].山口達輝, 松田洋之，2020，圖解AI：機器學習和深度學習的技術與原理，株式会社アイデミー,，碁峯資訊出版社，日本。
[47].M. Copeland, 2016, What’s the Difference Between Artificial Intelligence, Machine Learning and Deep Learning?, Nvidia網站。
[48].鄧文淵，2021，Python機器學習與深度學習特訓班:看得懂也會做的AI人工智慧實戰，碁峯資訊出版社，臺北，臺灣。
[49].Jon Krohn, Grant Beyleveld, Aglaé Bassens，2020，深度學習的16堂課：CNN + RNN + GAN + DQN + DRL，看得懂、學得會、做得出！，旗標科技股份有限公司，臺北，台灣。
[50].Jakub Langr, Vladimir Bok, 2002，GAN 對抗式生成網路，旗標科技股份有限公司，臺北，台灣。
[51].Zarei.M., Hellinga.B., Izadpanah.P., 2023, Application of Conditional Deep Generative Networks (CGAN) in empirical bayes estimation of road crash risk and identifying crash hotspots, International Journal of Transportation Science and Technology.
[52].V.K. Sharma, V. Kumar, 2019,Study on material transfer and surface properties during fiber laser cutting of A653 galvanized steel sheet, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol.41.
[53].鐘國亮，2004，影像處理與電腦視覺二版，東華書局，臺北，台灣。
[54].陳兵旗, 2022，機器視覺技術， 崧燁文化出版社，臺北，台灣。
[55].W.Zhang, Z. Huang, M. Kang, M. Shi, R. Deng, Y. Yan, Q. Zhu, 2021, Research on multivariate nonlinear regression model of specific energy of rock with laser drilling based on response surface methodology, Optics Communications, V.489, pp.126865.
[56].M.A. Bezerra, R.E. Santelli, E.P. Oliveira, L.S. Villar, L.A. Escaleira, 2008, Response surface methodology (RSM) as a tool for optimization in analytical chemistry, Talanta, Vol.76, pp.965-977.
[57].D. Svetlizky, B. Zheng, D.M. Steinberg, J. M. Schoenung, D. Lavernia, N. Eliaz, 2022, The influence of laser directed energy deposition (DED) processing parameters for Al5083 studied by central composite design, Journal of Materials Research and Technology, Vol.17, pp.3157-3171.
[58].S. Mullick, A.K. Agrawal, A.K. Nath, 2016, Effect of laser incidence angle on cut quality of 4 mm thick stainless steel sheet using fiber laser, Optics & Laser Technology, Vol.81, pp.168-179.
[59].H.A. Eltawahni, A.G. Olabi, K.Y. Benyounis, 2010, Effect of process parameters and optimization of CO2 laser cutting of ultra high-performance polyethylene, Materials & Design, Vol.31, pp.4029-4038.
[60].S. Akrichi, S Abid, H. Bouzaien, N. Ben Yahia, 2020, SPIF quality prediction based on experimental study using neural networks approaches, Mechanics of Solids, Vol. 55, pp.138-151.