[1] https://www.iea.org/
[2] Zhou Wu, Rui Ling and Ruoli Tang, 2017, “Dynamic battery equalization with energy and time efficiency for electric vehicles”, Energy, Vol. 141, pp. 937-948.
[3] Ye Tao, Miaohua Huang and Lan Yang, 2018, “Data-driven optimized layout of battery electric vehicle charging infrastructure”, Energy, Vol. 150, pp. 735-744.
[4] Naser Sina, Sayyad Nasiri and Vahid Karkhaneh, 2015, “ Effects of resistive loads and tire inflation pressure on tire power losses and CO2 emissions in real-world conditions”, Applied Energy, Vol. 157, pp. 974-983.
[5] https://www.bridgestone.com/bwsc/technology/ologic.html
[6] 羅俊,2015年,「影響輪胎滾動阻力的因素分析」,自動化儀表,第2期,第36卷,72-75頁。
[7] 張凱喬,2018年,「電動車產業現況剖析與發展趨勢」,車輛研測專刊,第1-3章,27-34頁。
[8] Alireza Khaligh and Zhihao Li, 2010, “Battery, Ultracapacitor, Fuel Cell, and Hybrid Energy Storage Systems for Electric, Hybrid Electric, Fuel Cell, and Plug-In Hybrid Electric Vehicles: State of the Art”, Transactions on Vehicular Technology, Vol. 59, pp. 2806-2814.
[9] Thomas H.Bradley and Andrew Alfonso Frank, 2009, “Design, demonstrations and sustainability impact assessments for plug-in hybrid electric vehicles”, Renew Sustain Energy Rev, Vol. 13, pp. 115-128.
[10] Phatiphat Thounthong, Viboon Chunkag, Panarit Sethakul, Bernard Davat and Melika Hinaje, 2009, “Comparative Study of Fuel-Cell Vehicle Hybridization with Battery or Supercapacitor Storage Device”, Vehicular Technology Society, Vol. 58, pp. 3892-3904.
[11] Chi Chiu Chan and Yin Starsky Wong, 2004, “Electric vehicles charge forward”, Power and Energy Magazine, Vol. 2, pp. 24–33.
[12] Lalit Kumar and Shailendra Jain, 2014, “Electric propulsion system for electric vehicular technology: A review”, Renewable and Sustainable Energy Reviews, Vol. 29, pp. 924-940.
[13] Z.Mané, Jean-Luc Loubet, C. Guerret, Laurent Guy, Olivier Sanseau, Ludovic Odoni, Loïc Vanel, Didier R. Long, Paul Sotta, 2013, “A new rotary tribometer to study the wear of reinforced rubber materials”, Wear, Vol.306, pp. 149-160.
[14] Kenneth Holmberg, Peter Andersson and Ali Erdemir, 2012, “Rolling deformation of truck tires: Measurement and analysis using a tire sensing approach”, Tribology International, Vol. 47, pp. 221-234.
[15] https://ec.europa.eu/commission/index_en
[16] Y. Wong., 1993, “Theory of ground vehicles”, John Wiley &Sons, 2nd edition, ISBN 0-471-52496-4.
[17] 王建強、戴建國、潘洪達、高延令,2003年,「基于神經網路方法與臺試輪胎滾動阻力模型研究」,中國公路學報,第3期,第16卷,96-99頁
[18] 馬良清,2005年,「國內外轎車子五線輪胎室內滾動阻力性能分析」,北京化工大學機械工程,碩士論文
[19] Yi Xiong, Ari Tuononen, 2015, “Rolling deformation of truck tires: Measurement and analysis using a tire sensing approach”, Journal of Terramechanics, Vol. 61, pp. 33-42
[20] Naser Sina, Sayyad Nasiri and Vahid Karkhaneh, 2015, “Effects of resistive loads and tire inflation pressure on tire power losses and CO2 emissions in real-world conditions”, Applied Energy, Vol. 157, pp. 974-983.
[21] 歐陽愛國,華鵬飛,蕭文龍,陳齊平,歐陽王平,2015年,「輪胎滾動阻力精確測試方法研究」,中國測試,第12期,第41卷。
[22] 李博慰、余俊、陸宗福,2010年,「載重輪胎室內滾動阻力測試結果影響因素分析」,輪胎工業,第12期,第30卷,755-760頁。
[23] 李俊傑,2000,「氣壓輪胎之滾動摩擦行為之電腦模擬」,國立成功大學工程科學系,碩士論文。[24] 倉定國,2003,「充氣輪胎之遲滯胎現象之研究」,國立成功大學工程科學系,碩士論文。[25] 邱韋程,2012,「輻射層輪胎滾動阻力之數值模擬分析」,國立台灣海洋大學系統工程暨造船學所,碩士論文。[26] 郭庭瑋,2014年,「電動機車輪胎滾動阻力研究」,國立台灣大學機械工程學系,碩士論文。[27] Seongrae Kim, Hanseok Park, Byungwoo Moon, Kideug Sung, Jae-Mean Koo and Chang-Sung Seok, 2019, “The prediction methodology for tire’s high speed durability regulation test using a finite element method”, International Journal of Fatigue, Vol. 118, pp. 77-86.
[28] 李紅偉,2010年,「淺析ISO 28580:2009輪胎滾動阻力測試方法」,輪胎工業,第30卷, 259-264頁。
[29] Xinkai Wu, David Freese, Alfredo Cabrera and William Kitch, 2015, “Electric vehicles’ energy consumption measurement and estimation”, Transportation Research Part D , Vol. 34, pp. 52–67.
[30] Gebeyehu M.Fetene, Sigal Kaplan, Stefan L.Mabit, Anders F.Jensen and Carlo G.Prato , 2017, “ Harnessing big data for estimating the energy consumption and driving range of electric vehicles ”, Transportation Research Part D: Transport and Environment ,Vol.54, pp.1-11.
[31] Kai Liu, Toshiyuki Yamamoto and Takayuki Morikawa, 2017, “Impact of road gradient on energy consumption of electric vehicles”, Transportation Research Part D: Transport and Environment ,Vol.54, pp.74-81.
[32] Mars William and Luchini John., 1999, “An analytical model for the transient rolling resistance behavior of tires”, Tire Science and Technology, Vol. 27, pp. 161-175.
[33] Johannes Asamer, Anita Graser, Bernhard Heilmann and Mario Ruthmair, 2016, “Sensitivity analysis for energy demand estimation of electric vehicles”, Transportation Research Part D: Transport and Environment, Vol. 46, pp.182–199.
[34] 賴佳偉,2007,Apollo-V太陽能車動態運行性能分析之研究,國立高雄應用科技大學,碩士論文。[35] Galvin Ray, 2017, “Energy consumption effects of speed and acceleration in electric vehicles: Laboratory case studies and implications for drivers and policymakers”, Transportation Research Part D: Transport and Environment, Vol. 53, pp.234–248.
[36] 林連文,2018,「底盤動力計建置及電動車動態測試性能分析與能耗研究」,國立高雄科技大學,碩士論文。[37] John Brady and Margaret O’Mahony, 2016, “Development of a driving cycle to evaluate the energy economy of electric vehicles in urban areas”, Applied Energy,Vol. 177, pp. 165-178.
[38] Zifan Liu, Andrej Ivanco and Zoran S. Filipi, 2016, “Impacts of real-world driving and driver aggressiveness on fuel consumption of 48V mild hybrid vehicle”, SAE International, Vol. 5, pp. 249-258.
[39] Matthew Barth and Kanok Boriboonsomsin, 2009, “Energy and emissions impacts of a freeway-based dynamic eco-driving system”, Transportation Research Part D: Transport and Environment, Vol. 14, pp. 400-410.
[40] Masafumi Miyatake, Motoi Kuriyama and Yuzuru Takeda, 2011, “Theoretical study on eco-driving technique for an Electric Vehicle considering traffic signals”, 2011 IEEE Ninth International Conference on Power Electronics and Drive Systems.
[41] Felicitas Mensing, Rochdi Trigui and Eric Bideaux, 2011, “Vehicle trajectory optimization for application in ECO-driving”, 2011 IEEE Vehicle Power and Propulsion Conference.
[42] Leo Laine and Jonas Fredriksson, 2007, “Coordination of Vehicle Motion and Energy Management Control Systems for Wheel Motor Driven Vehicles”, 2007 IEEE Intelligent Vehicles Symposium.
[43] Enjian Yao and Rui Zhang, 2015, “ Electric vehicles’ energy consumption estimation with real driving condition data”, Transportation Research Part D: Transport and Environment, Vol. 41, pp.177–187.
[44] https://www.worldsolarchallenge.org/dashboard/galleries
[45] 汽車輪該滾動阻力試驗方法,中國國家標準編號:GBT 18861-2012
[46] Coup de Puce Expansion, 2003, “The Tyre Rolling resistance and fuel savings”, Société de Technologie Michelin.
[47] https://auto.itri.org.tw/
[48] Bosch, 1996, Automotive Handbook. fourth ed. Robert Bosch Gmbh.
[49] Mehrdad Ehsani, Kambiz Ebrahimi, Yimin Gao and Stefano Longo, 2018, “Modern Electric, Hybrid Electric, and Fuel Cell Vehicles”, CRC.
[50] 楊振達,2014年,「控制區域網路傳輸結合即時胎壓感測於電動車行車性能之研究」,國立高雄應用科技大學,碩士論文。[51] National Research Council, 2006, “Tires and Passenger Vehicle Fuel Economy: Informing Consumers, Improving Performance”, Transportation Research Board Special Report 286.
[52] José Luis Jiménez, Peter McClintock, Gregory McRae, David Nelson and Mark Zahniser, 1999, “Vehicle Specific Power: A Useful Parameter for Remote Sensing and Emission Studies”, 9th CRC On-Road Vehicle Emissions Workshop, San Diego, 21April.
[53] 曾文丁,張家豪,2014年,「插電式複合動力車(PHEV)歐盟油耗測試介紹」,工研院,智慧車輛技術專輯。
[54] https://www.artc.org.tw/chinese/01_testing/04_02detail.aspx?pid=1