|
[1]傅怡釧,波浪通過臺灣中部海域離岸風電場址之初步探討,港灣季刊,2019。 [2]羅冠顯,離岸風電基地母港(臺中港)+鄰近海域海氣象特性分析,港灣技術季刊,2019。 [3]X. Sun, The current state of offshore wind energy technology development. Energy, 2012. [4]C. Golightly, Tilting of monopiles Long, heavy and stiff; pushed beyond their limits. GROUND ENGINEERING, 2014. [5]J. Kaldellis, The wind energy (r)evolution: A short review of a long history. Renewable Energy, 2011. [6]W. Musial, Energy from Offshore Wind. National Renewable Energy Laboratory, 2006. [7]Z. Ren, Offshore wind turbine operations and maintenance: A state-of-the-art review. Renewable and Sustainable Energy Reviews, 2021. [8]W. Shi, Load analysis and comparison of different jacket foundations. Renewable Energy, 2013. [9]I. W. Chen, Design and Analysis of Jacket Substructures for Offshore Wind Turbines. Energies, 2016. [10]P. Zhang, Bearing capacity and load transfer of brace topological in offshore wind turbine jacket structure. Ocean Engineering, 2020. [11]D. Ahn, Comparative evaluation of different offshore wind turbine installation vessels for Korean west–south wind farm. International Journal of Naval Architecture and Ocean Engineering, 2017. [12]Z. Jiang, Installation of offshore wind turbines: A technical review. Renewable and Sustainable Energy Reviews, 2021. [13]D.H. Jeong, Lifting simulation of an offshore supply vessel considering various operating conditions. Advances in Mechanical Engineering, 2016. [14]Z. Zhao, Wind Turbine Tower Failure Modes under Seismic and Wind Loads. Journal of Performance of Constructed Facilities, 2019. [15]S. Sang, Dynamic modification method for BEM of wind turbine considering the joint action of installation angle and structural pendulum motion. Ocean Engineering, 2020. [16]T.J. Knill, The application of aeroelastic analysis output load distributions to finite element models of wind. Wind Engineering, 2005. [17]Y. Zhao, Numerical modeling and analysis of the dynamic motion response of an offshore wind turbine blade during installation by a jack-up crane vessel. Ocean Engineering, 2018. [18]鄭偉志,輕量化遊艇上層結構吊掛翻轉之研究,國立高雄海洋科技大學造船工程研究所,2014. [19]S. Liang, Mathematical model of acrosswind dynamic loads on rectangular tall buildings. Journal of Wind Engineering and Industrial Aerodynamics, 2002. [20]S. Liang, Analysis of three dimensional equivalent static wind loads of symmetric high-rise buildings based on wind tunnel tests. Wind and Structures, 2014. [21]F. Ferroudji, Numerical simulations on static and dynamic response of full-scale mast structures for H-Darrieus wind turbine. Wind Engineering, 2020. [22]S. Alshurafa, Finite element method for the static and dynamic analysis of FRP guyed tower. Journal of Computational Design and Engineering, 2019. [23]建築物耐風設計規範及解說. 中華民國內政部營建署, 2014. [24]M. Bechtold, Modeling of Steel Ropes-2009 SIMULIA Customer Conference. 2009 SIMULIA Customer Conference, 2009. [25]T. Schneider, A Large-Scale Comparison of Tetrahedral and Hexahedral. Cornell University, 2019. [26]ABAQUS Analysis, User’s Guide. [27]2021/4/2搜尋:Lifting of Transition Pieces (TP) with adjustable hydraulic yoke. https://www.youtube.com/watch?v=CZonNsmMWas. [28]J. Jonkman, Definition of a 5-MW Reference Wind Turbine for Offshore System Development, in National Renewable Energy Laboratory. 2009. [29]H. Song, A New Structural-Dynamics Module for offshore multimemberj substructures within the wind turbine computer-aided engineering tool fast. Offshore and Polar Engineering Conference-ISOPE, 2013. [30]Y.C. Hung, Natural frequency and vibration analysis of jacket type foundation for offshore wind power. 2017.
|