|
[1] C. H. Huang, H. H. Wu, and C. L. Wei, “Compensator-free mixed-ripple adaptive on-time controlled boost converter,” IEEE J. Solid-State Circuits, vol. 53, no. 2, pp. 596-604, Feb. 2018. [2] T. Y. Man, P. K. T. Mok, and M. J. Chan, “A 0.9-v input discontinuous-conduction-mode boost converter with cmos-control rectifier,” IEEE J. Solid-State Circuits, vol. 43, no. 9, pp. 2236-2045, Sep. 2008. [3] H. H. Wu, C. L. Wei, Y. C. Hsu, and R. B. Darling, “Adaptive peak-inductor-current-controlled pfm boost converter with a near-threshold start voltage and high efficiency,” IEEE Trans. Power Electron, vol. 30, no. 4, pp. 1956-1964, Apr. 2015. [4] C. H. Huang and C. C. Chen, “A high-efficiency current-mode buck converter with a power-loss-aware switch-on-demand modulation technique for mutifunction socs,” IEEE Trans. Power Electron, vol. 31, no. 12, pp. 8303-8316, Dec. 2016. [5] X. Jing, and P. K. T. Mok, “A fast fixed-frequency adaptive-on-time boost converter with light load efficiency enhancement and predictable noise spectrum,” IEEE J. Solid-State Circuits, vol. 48, no. 10, pp. 2442-2455, Oct. 2013. [6] T. Y. Man, P. K. T. Mok, and M. Chan, “An auto-selectable-frequency pulse-width modulator for buck converters with improved light-load efficiency,” IEEE Int. Solid-State Circuits Conf. (ISSCC) Dig. Tech. Papers, Feb. 2008, pp. 440–626. [7] W. H. Huang, K. H. Chen, and S. Y. Kuo, “Dithering skip modulation, width and dead time controllers in highly efficient DC-DC converters for system-on-chip applications,” IEEE J. Solid-State Circuits, vol. 42, no. 11, pp. 2036–2046, Nov. 2007. [8] C. H. Chia, P. S. Lei, and R. C. Chang, “A high-efficiency pwm dc-dc buck converter with a novel dcm control under light-load,”IEEE International Symposium of circuits and systems (ISCAS), vol. 22, no. 8, pp. 237-240, Aug. 2011. [9] Y. P. Su, Y. K. Luo, Y. C. Chen, and K. H. Chen, “Current-mode synthetic control technique for high-efficiency dc-dc boost converters over a wide load range,” IEEE Trans. Very Large Scale Integr.(VLSI) Syst., vol. 22, no. 8, pp. 1666-1678, Aug. 2014. [10] H. Nam, Y. Ahn and J. Roh, "5-V buck converter using 3.3-V standard cmos process with adaptive power transistor driver increasing efficiency and maximum load capacity," IEEE Transactions on Power Electronics, vol. 27, no. 1, pp. 463-471, Jan. 2012. [11] D. Park and H. Lee, “Improvements in light-load efficiency and operation frequency for low-voltage current-mode integrated boost converters,” IEEE Trans. Circuits Syst. II, Exp. Briefs, vol. 61, no. 8, pp. 599-603, Aug. 2014. [12] P. Malcovati, M. Belloni, F. Gozzini, C. Bazzani, and A. Baschirotto,“A 0.18-μm CMOS, 91%-efficiency, 2-A scalable buck-boost DC-DC converter for LED drivers,” IEEE Trans. Power Electron, vol. 29, no. 10, pp. 5392–5398, Oct. 2014. [13] H. Chen, H. Huang, S. Jheng, H. Huang and Y. Huang, "High-Efficiency PFM Boost Converter With an Accurate Zero Current Detector," IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 65, no. 11, pp. 1644-1648, Nov. 2018. [14] Y. Hwang, A. Liu, Y. Chang, and J. Chen, “A high-efficiency fast-transient-response buck converter with analog-voltage-dynamic estimation techniques,” IEEE Trans. Power Electron., vol. 30, no. 7, pp. 3720–3730, Jul. 2015. [15] Y. Park et al., "A Design of a 92.4% Efficiency Triple Mode Control DC–DC Buck Converter With Low Power Retention Mode and Adaptive Zero Current Detector for IoT/Wearable Applications," in IEEE Transactions on Power Electronics, vol. 32, no. 9, pp. 6946-6960, Sept. 2017. [16] S. Kim et al., "Design of a High Efficiency DC–DC Buck Converter With Two-Step Digital PWM and Low Power Self-Tracking Zero Current Detector for IoT Applications," in IEEE Transactions on Power Electronics, vol. 33, no. 2, pp. 1428-1439, Feb. 2018, doi: 10.1109/TPEL.2017.2688387. [17] J. Chen, Y. Hwang, J. Chen, Y. Ku and C. Yu, "A New Fast-Response Current-Mode Buck Converter With Improved I2 -Controlled Techniques," in IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 26, no. 5, pp. 903-911, May 2018, doi: 10.1109/TVLSI.2018.2796088. [18] B. Sahu, and G. A. Rincon-Mora, “An accurate, low-voltage, cmos switching power supply with adaptive on-time pulse-frequency modulation (pfm) control,” IEEE Trans. Circuits Syst. I:Reg. Papers, vol. 54, no. 2, pp. 312-321, Feb. 2007. [19] J. Chen, Y. Hwang, J. Yu, Y. Ku and C. Yu, "A Low-EMI Buck Converter Suitable for Wireless Sensor Networks With Spur-Reduction Techniques," in IEEE Sensors Journal, vol. 16, no. 8, pp. 2588-2597, April15, 2016. [20] D. Lu, J. Yu, Z. Hong, J. Mao, H. Zhao, and E. Cirot, “A 10 MHz ripple-based on-time controlled buck converter with dual ripple compensation and real-time efficiency optimization,” Proc. Eur. Solid-State Circuits Conf, 2012, pp. 333–336. [21] V. Michal, “Peak-efficiency detection and peak-efficiency tracking algorithm for switched-mode DC–DC power converters,” IEEE Trans. Power Electron, vol. 29, no. 12, pp. 6555–6568, Dec. 2014. [22] L. H. Phuc, C. S. Chae, M. C. Lee, S. W. Wang, S. I. Kim, and G. H. Cho, “Integrated zero-inductor-current detection circuit for step-up dc-dc converters,” Electronics Letters, vol. 42, no. 16, pp. 943-944, Aug. 2006. [23] W. Fu, S. T. Tan, M. Radhakrishnan, R. Byrd and A. A. Fayed, "A DCM-Only Buck Regulator With Hysteretic-Assisted Adaptive Minimum-On-Time Control for Low-Power Microcontrollers," in IEEE Transactions on Power Electronics, vol. 31, no. 1, pp. 418-429, Jan. 2016.
|