|
[1]Yen-Fu Su, Shin-Yueh Yang, Wei-Hao Chi, Kuo-Ning Chiang, “Light degradation prediction of high-power light-emitting diode lighting modules”, 11th International Thermal, Mechanical & Multi-Physics Simulation, and Experiments in Microelectronics and Microsystems(EuroSimE), pp. 26-28, 2010. [2]G. Patankar, J.A. Weibel, S.V. Garimella, “On the transient thermal response of thin vapor chamber heat spreaders: governing mechanisms and performance relative to metal spreaders”, International Journal of Heat and Mass Transfer, vol.136, pp. 995-1005, 2019. [3]Z. Chen, Y. Li, W. Zhou, L. Deng, Y. Yan, “Design, fabrication and thermal performance of a novel ultra-thin vapour chamber for cooling electronic devices”, Energy Conversion and Management, vol.187, pp. 221-231, 2019. [4]Peter Z. Shi, P. Arulvanan, Albert C.W. Lu, “Thermal Performance Evaluation of Power SSL Module in LTCC”, Electronics Packaging Technology Conference, Singapore, pp. 285-288, 2007. [5]Eveliina Juntunen, Aila Sitomaniemi, Olli Tapaninen, Ryan Persons, Mark Challingsworth, and Veli Heikkinen, “Thermal Performance Comparison of Thick-Film Insulated Aluminum Substrates With Metal Core PCBs for High-Power LED Modules”, IEEE Transactions on Components, Packaging and Manufacturing Technology, pp. 1957-1964, 2012. [6]Eveliina Juntunen, Olli Tapaninen, Aila Sitomaniemi, Markku J¨ams¨a, Veli Heikkinen, Mikko Karppinen, Pentti Karioja, “Copper-Core MCPCB With Thermal Vias for High-Power COB LED Modules”, IEEE Transactions on Power Electronics, pp.1410-1417, 2013. [7]Maxime Vuckovic, Nicolas Depret, “Impacts of local cooling technologies on air cooled data center server performance: Test data analysis of Heatsink, Direct Liquid Cooling and passive 2-Phase Enhanced Air Cooling based on Loop Heat Pipe”, 2016 32nd Thermal Measurement, Modeling & Management Symposium (SEMI-THERM), 2016. [8]Zongqing Ren, Jaeho Lee, “Thermoelectric Cooling Device Based on Holey Silicon”, 17th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2018. [9]Zhou Jie-min, Fu Yi-feng, Yang Ying, Tu Juan, Hu Bing-ting, Chen Xiao-ling, “Comparative Investigation on the Cooling Effect of Swirling Impinging Jet using Experimental and Numerical Methods”, International Symposium on High Density packaging and Microsystem Integration, 2007. [10]R. Singh, A. Jalilvand, K. Goto, K. Mashiko, Y. Saito, M. Mochizuki, “Direct impingement cooling of LED by Piezo fan”, International Conference on Electronics Packaging (ICEP), 2014. [11]R. Singh, A. Jalilvand, K. Goto, K. Mashiko, Y. Saito, M. Mochizuki, “Direct impingement cooling of LED by Piezo fan”, International Conference on Electronics Packaging (ICEP), 2014. [12]Sivanand Somasundaram, Kevin Bagnall, Solomon Adera, Bin He, Mengyao Wei, Chuan Seng Tan, Evelyn Wang, “Detailed thermal resistance model for characterization of the overall effective thermal conductivity of a flat heat pipe”, 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2016. [13]Mark Christian E. Manuel, Emmanuelle R. Biglete, Jennifer C. Dela Cruz, Marvin S. Verdadero, Lorenzo Miguel R. Martinez, Joyce Mavirich C. Masangcay, Ron Ericsson I. Tañedo, John Albert E. Flores, “Design, Fabrication and Testing of a Rectangular Heating Surface Pattern Fins to Improve Heat Transfer in Cooking Pots”, 11th IEEE Control and System Graduate Research Colloquium (ICSGRC), 2020. [14]Cengel, Y. A. and Ghajar, A. J., “Heat and Mass Transfer: Fundamentals and Applications”, McGraw-Hill, New York, 2011. [15]Yeh, L. T., “Review of Heat Transfer Technologies in Electronic Equipment”, ASME Journal of Electronics Packaging, vol. 117, no 4, pp. 333-339, 1995. [16]Niki, I., Narukawa, Y., Morita, D., Morita, D., Sonobe, S., Mitani, T., Tamaki, H., Murazaki, Y., Yamata. M., and Mukai, T., “White LEDs for Solid State Lighting”, Third International Conference on Solid State Lighting, pp. 1-9, 2004. [17]Murtuza, G. and Senior, J. M., “Method for Extracting Thermally Stable Optical Signals from a CaAlAs LED source”, IEEE Photonics Technology Letters, vol. 7, no.5, pp. 479-481, 1995. [18]J.P. Holman, “Heat Transfer”, McGraw-Hill, New York, 1992. [19]Gu, Y., Narendran, N., and Freyssinier, J. P., “White LED Performance”, Fourth International Conference on Solid State Lighting, pp. 119-124, 2004. [20]Cheng, H. C., Chen, W. H., and Chung, I.C., “Integration of Simulation and Response Surface Methods for Thermal Design of Multichip Modules”, IEEE Transactions on Components and Packaging Technologies, vol. 27, no 2, pp. 359-372, 2004. [21]Robert E. Henshaw, “Thermoregulation During Hibernation: Application of Newton’s Law of Cooling”, Journal of Theoretical Biology, vol. 20, no. 1, pp.79-90, 1965. [22]Dae-Whan Kim, Emil Rahim, Avram Bar-Cohen and Bongtae Han, “Direct Submount Cooling of High-Power LEDs”, IEEE Transactions on Components and Packaging Technologies, vol. 33, no. 4, pp.698-712, 2010. [23]Hwang, W. J., Lee, T. H., Kim, L., and Shin, M. W., “Determination of Junction Temperature and Thermal Resistance in the GaN-based LEDs using Direct Temperature Measurement”, physica Status solidi, vol. 1, no. 10, pp. 2429-2432, 2004. [24]Narendran, N. and Yimin Gu, Y., “Life of LED-Based white Light Sources”, IEEE/OSA Journal of Display Technology, vol. 1, no. 1, 2005. [25]Shaukatullah, H., Gaynes, M. A., White, L. H. , “Thermal Enhancement of Surface Mount Electronic Packages with Heat Sinks”, Proc. of IEEE 43rd Annual IEEE Electronic Components, Technology Conference, pp.256-263, 1993. [26]Rao, R.V., Venkateshan, S. P., “Experimental Study of Free Convection and Radiation in Horizontal Fin Arrays”, Int. Journal of Heat and Mass Transfer, Vol. 39, No. 4, pp. 779-789, 1996. [27]Amit Md.Estiaque Arefin, “Thermal analysis of modified pin fin heat sink for natural convection”, 5th International Conference on Informatics, Electronics and Vision (ICIEV), 2016. [28]Abdelhadi Bouknadel, Imane Rah, Hafsa El Omari, Hamid El Omari, “Comparative study of fin geometries for heat sinks in natural convection”, International Renewable and Sustainable Energy Conference (IRSEC), 2014. [29]Mathias Ekpu, Raj Bhatti, Ndy Ekere, Sabuj Mallik, EmekaAmalu, KennyOtiaba, “Investigation of effects of heat sinks on thermal performance of microelectronic package”, 3rd IEEE International Conference on Adaptive Science and Technology (ICAST 2011). [30]Zijuan Cao, Hua Zhu, Zhanglu Xu, “Study on the effects of heat pipe and fins for heat dissipation under natural convection”, International Conference on ConsumerElectronics, Communications and Networks (CECNet), 2011. [31]Tu Fubing, Mao Jianfeng, Zhou Jiemin, Zeng Wenhui, Jia Yu, Wu Huifen, “Heat Transfer from Rectangular Pin Fin Heat Sinks under Air Jet Impingement”,Fourth International Conference on Intelligent Computation Technology and Automation, 2011. [32]Waqar A.khan , J. Richard Culham and M. Michael Yovanovich, “optimization of pin-fin heat sinks using entropy generation minimization”, IEEE transactions on components and packaging technologies , pp.247-254, 2005. [33]Maveety, J. G., Jung, H. H., “Design of An Optimal Pin-Fin Heat Sink with Air Impingement Cooling”, Int. Journal of Heat and Mass Transfer, Vol. 27, No. 2, pp. 229-240, 2000. [34]Haper, D. R. , Brown, W. B., “Mathematical Equations for Heat Conduction in the Fins if Air Cooled Engines”, NACA Report, No 158, 1922. [35]Jonsson, H., Moshfegh, B., “Modeling of the Thermal and Hydraulic Performance of Plate Fin, Strip Fin, and Pin Fin Heat Sinks—Influence of Flow Bypass”, IEEE Transactions on Componets and Packaging Technologies, Vol. 24, NO. 2, June 2001. [36]Ishizuka, M., Yokono, Y., Biswas, D., “Experimental Study on the Performance of Compact Heat Sink for LSI Packages”, Proc. of the Institution of Mechanical Engineers, Part A-Journal of Power and Energy, Vol.214 , No.5, pp.523-530, 2000. [37]Chyi-Tsong Chen, Shi-Hung Jan, “Dynamic simulation, optimal design and control of pin-fin heat sink processes”, Journal of the Taiwan Institute of Chemical Engineers, pp. 77-88, 2012. [38]Haoyuan Quan, Ting Zhang, Hang Xu, Shen Luo, Jun Nie, Xiaoqun Zhu, “Photo-curing 3D printing technique and its challenges”, Bioactive Materials, pp. 110-115, 2020. [39]Qiang Zhang, Shayuan Weng, Craig M.Hamel, S. Macrae Montgomery, Jiangtao Wu, Xiao Kuang, Kun Zhou, H. Jerry Qi, “Design for the reduction of volume shrinkage-induced distortion in digital light processing 3D printing”, Extreme Mechanics Letters, 2021. [40]Jingzhou Zhao, Qianzhu Li, Fagang Jin, Nongyue He, “Digital light processing 3D printing Kevlar composites based on dual curing resin”, Additive Manufacturing, 2021. [41]Hirotoshi Nagata, Takashi Shinriki, Kaori Shima, Masumi, and Eungi Min Haga, “Improvement of bonding strength between Au/Ti and SiO2 films by Si layer insertion”, J. Vac. Sci. Technot. A, Vol.17, No.3, pp.1018-1023, 1999. [42]Huan Liu; Fei Geng, Peng SunHuan Liu, Fei Geng, Peng, “Sun Research on Copper Electroplating Technology for High Density TSV Filling”, 21st International Conference on Electronic Packaging Technology (ICEPT), 2020. [43]Yongfu Liu, Daowei Wu, “Copper filling by electroplating for high aspect ratio TSV”, 14th International Conference on Electronic Packaging Technology, 2013. [44]Ken Suzuki, Hideo Miura, Osamu Asai, Ryosuke Furuya, Jaeuk Sung, Naokazu Murata, “Micro-texture dependence of stress-induced migration of electroplated copper thin film interconnections used for 3D integration”, International Conference on Simulation of Semiconductor Processes and Devices (SISPAD), 2013. [45]Jinqun Zhou, Kai Zhu, Chong Wang, Wei He, Hua Miao, “Quick development of copper electroplating formula for via and trench filling by an experiential method”, 21st International Conference on Electronic Packaging Technology (ICEPT),2020. [46]Jiatong Liu, Ken Suzuki, Hideo Miura, “Variation of thermal stress in TSV structures caused by crystallinity of electroplated copper interconnections”, International 3D Systems Integration Conference (3DIC), 2015. [47]Kesheng Feng, Bill DeCesare, Mike Yu, Don DeSalvo, Jim Watkowski, “Electroplated copper filling of through holes on varying substrate thickness”, 9th International Microsystems, Packaging, Assembly and Circuits Technology Conference (IMPACT), 2014. [48]Xue Feng, Wei Luo, Ming Li, Su Wang, “Effect of leveler on microstructure and stress of electroplated copper for TSV application”, 3rd IEEE CPMT Symposium Japan, 2013. [49]Shanshan Wu, Huiqin Ling, Yitong Xie, Ming Li, Daquan Yu, “Synergistic Effect of Additives on Filling of Tapered TGV Vias by Copper Electroplating”, 21st International Conference on Electronic Packaging Technology (ICEPT), 2020. [50]M. Saadaoui, W. Wien, H. V. Zeijl, H. Schellevis, M. Laros, P. M. Sarro, “Local Sealing of High Aspect Ratio Vias for Single Step Bottom-up Copper Electroplating of Through Wafer Interconnects”, IEEE SENSORS, 2007. [51]S. Murali, N. Srikanth, “Acid Decapsulation of Epoxy Molded IC Packages With Copper Wire Bonds”, IEEE Transactions on Electronics Packaging Manufacturing, pp. 179-183, 2006.
|