1. 陳武宏,“精密鑄造應用實務”,全華科技圖書股份有限公司,1990。
2. 淩業勤,“中國古代傳統鑄造技術”,科學技術文獻出版社,1987。
3. 劉文海,“精密鑄造業發展現況與展望”,金屬工業研究發展中心,
2002。
4. 林宗獻,“精密鑄造”,全華科技圖書股份有限公司,1986。
5. 李宥昀," 數值模擬在不鏽鋼精密鑄造方案設計上的應用",國立成功大學,2007,碩士論文6. W. Kurz and D.J. Fisher, Fundamental of Solidification, 4th ed., p11-12, Trans Tech Publications Ltd (1998)
7. W. S. Hwang, "Computer Simulation for the Fluid Flow in Casting System", M. S. Thesis, Department of Metallurgical and Materials Engineering, University of Pittsburgh (1981)
8. R. A. Stoehr and W. S. Hwang, "Modeling the Flow of Molten Metal Having a Free Surface During Entry into Molds", Proceeding of the Conference on Modeling of Casting and Welding Processes II, p 47-58 (1983)
9. W. S. Hwang and R. A. Stoehr, "Fluid Flow Modeling for Computer Aided Design of Casting", Journal of Metals, p 22-29 (1983)
10. W. S. Hwang and R. A. Stoehr, "Modeling of Fluid Flow", ASM Metals Handbook, 9th ed., Vol. 15, Chapter 11, Section B, p 867-876 (1988)
11. C. W. Hirt, "Flow Analysis for Non-expects", Proceeding of the Conference on Modeling of Casting and Welding Processes II, p 67-75 (1983)
12. K. Anzai and E. Niyama, "Quasi Three-Dimensional Mold Filling Simulation System for Prediction of Defects in Die Castings", Conference Proceeding on the Modeling of Casting, Welding and Advanced Solidification Processes IV, p 471-485 (1988)
13. B. Minaie, K. A. Stelson and V. R. Voller, "Analysis of Flow Patterns and Solidification Phenomena in the Die Casting Process", Journal of Engineering and Technology (Transactions of ASME), Vol. 113, No. 3, p 296-302 (1991)
14. I. G. Chen and D. M. Stefanescu, "Computer-Aided Differential Thermal Analysis of Spherical and Compacted Graphite Cast Irons", Transaction of American Foundrymen's Society, p 947-964 (1984)
15. K. G. Upadhya, D. M. Stefanescu and D. P. Yeager, "Computer-Aided Cooling Curve Analysis: Principle and Application in Metal Casting", Transaction of American Foundrymen's Society, p 61-66 (1989)
16. Ch. A. Gandin, J. L. Desbiolles, M. Rappaz, and Ph. Thevoz, "A Three-Dimensional Cellular Automaton–Finite Element Model for the Prediction of Solidification Grain Structures", Metallurgical and Materials Transactions A, Vol. 30A, p 3153-3165 (1999)
17. T. S. Piwonka and M. C. Flemings, "Pore Formation in Solidification", Transaction of AIME, p 1-8 (1966)
18. E. Niyama, T. Uchida, M. Morikawa and S. Saito, "A Method of Shrinkage Prediction and Its Application to Steel Casting Practice", AFS International Cast Metals Journal, p 52-63 (1982)
19. 徐元展,徐家杰,徐業良,"汽車輪圈鑄造問題研究",元智大學,
2002
20. 黃啟源," 鋅合金壓鑄成品之模流分析",中原大學,2004,碩
士論文
21. 陳流,黃放," 基於Anycasting 的齒圈座鑄鋼件發熱保溫冒口
設計",2012,中國鑄造活動周論文集
22. 王繼敏," 不鏽鋼與金屬腐蝕", 1988,科技圖書