[1]D. Kono, T. Inagaki, A. Matsubara, and I. Yamaji, 2013, “Stiffness model of machine tool supports using contact stiffness,” Precision Engineering, Vol.37, No.3, pp.650-657, doi: 10.1016/j.precisioneng.2013.01.010.
[2]G. Bianchi, S. Cagna, N. Cau, and F. Paolucci, 2014, “Analysis of vibration damping in machine tools,” Procedia CIRP, Vol.21, pp.367-372, doi: 10.1016/j.procir.2014.03.158.
[3]M. Gonzalez-Valadez, A. Baltazar, and R. S. Dwyer-Joyce, 2010, “Study of interfacial stiffness ratio of a rough surface in contact using a spring model,” Wear, Vol.268, No.3-4, doi: pp.373-379, 10.1016/j.wear.2009.08.022.
[4]Y. Wakasawa, M. Hashimoto, and E. Marui, 2004, “The damping capacity improvement of machine tool structures by balls packing,” International Journal of Machine Tools and Manufacture, Vol.44, No.14, pp.1527-1536, doi: 10.1016/j.ijmachtools.2004.05.001.
[5]L. Virgin, and D. Holland, 2009, January, “Effect of Weight on the Experimental Modal Analysis of Slender Cantilever Beams,” In International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Vol.48982, doi: pp.557-560, 10.1115/DETC2009-86149.
[6]宣毓堂,2017,工具機腳座參數鑑別與影響之研究,國立中興大學機械工程學系所碩士論文。取自https://reurl.cc/p1YEyZ[7]Y. Yang, S. Gao, K. Chen, Y. Pan, and P. Guo, 2017, “Vibration analysis and development of an ultrasonic elliptical vibration tool based on a portal frame structure,” Precision Engineering, Vol.50, pp.421-432, doi: 10.1016/j.precisioneng.2017.06.016.
[8]C. Ni, L. Zhu, and Z. Yang, 2019, “Comparative investigation of tool wear mechanism and corresponding machined surface characterization in feed-direction ultrasonic vibration assisted milling of Ti–6Al–4V from dynamic view,” Wear, Vol.436-437, p.203006, doi: 10.1016/j.wear.2019.203006.
[9]K. L. Kuo, 2009, “Ultrasonic vibrating system design and tool analysis,” Transactions of Nonferrous Metals Society of China (English Edition), Vol. 19, No.SUPPL. 1, pp.s225-s231, doi: 10.1016/S1003-6326(10)60275-0.
[10]王岩、林彬、東野廣恒、董穎懷、趙靜楠、張曉峰,2019,附件化超聲振動工作台設計及有限元優化分析,北京航空航天大學學報,第45卷,第8期,第1589-1596頁
[11]M. Law, Y. Altintas, and A. Srikantha Phani, 2013, “Rapid evaluation and optimization of machine tools with position-dependent stability,” International Journal of Machine Tools and Manufacture, Vol.68, pp.81-90, doi: 10.1016/j.ijmachtools.2013.02.003.
[12]Y. Yang, J. Muñoa, and Y. Altintas, 2010, “Optimization of multiple tuned mass dampers to suppress machine tool chatter,” International Journal of Machine Tools and Manufacture, Vol.50, No.9, pp.834-842, doi: 10.1016/j.ijmachtools.2010.04.011.
[13]D. Huo, K. Cheng, and F. Wardle, 2010, “A holistic integrated dynamic design and modelling approach applied to the development of ultraprecision micro-milling machines,” International Journal of Machine Tools and Manufacture, Vol.50, No.4, pp.335-343, doi: 10.1016/j.ijmachtools.2009.10.009.
[14]T. Türker, M. E. Kartal, A. Bayraktar, and M. Muvafik, 2009, “Assessment of semi-rigid connections in steel structures by modal testing,” Journal of Constructional Steel Research, Vol.65, No.7, pp.1538-1547, doi: 10.1016/j.jcsr.2009.03.002.
[15]B. Zhang, H. Ding, and X. Sheng, 2008, “Modal analysis of board-level electronic package,” Microelectronic Engineering, Vol.85, No.3, pp.610-620, doi: 10.1016/j.mee.2007.11.008.
[16]S. M. Kim, J. H. Ha, S. H. Jeong, and S. K. Lee, 2001, “Effect of joint conditions on the dynamic behavior of a grinding wheel spindle,” International Journal of Machine Tools and Manufacture,Vol.41,No.12, pp.1749-1761, doi: 10.1016/S0890-6955(01)00040-2
[17]鞠家全、唐傑峰、繆申、徐新朋、金雷、邱自學,2017,動梁龍門加工中心立柱輕量化設計,現代製造工程,第6期,第150-155頁
[18]馬超、馬雅麗、趙宏安、王德倫,2011,VHT800 立式車铣加工中心立柱結構靜動態優化及輕量化設計,組合機床與自動化加工技術,第3期,第11-15頁
[19]朱遠、張業成、羅生梅,2019,基於拓撲優化的立柱結構輕量化設計,計算機仿真,第36卷,第9期,230-235頁
[20]鞠家全、邱自學、任東、劉傳進、劉志華,2017,採用灰色理論和組合賦權法的機床立柱設計與研究,機械科學與技術,第36卷,第9期,第1388-1395頁
[21]王延忠、呂曉宇、孫紅梅、劉強、高琦、沈華紅、王世慧,2011,基於 ABAQUS 的高速立式加工中心床身的優化設計,機床與液壓,第39卷,第5期,第64-66頁
[22]方浩、王彥偉,2018,基於動態靈敏度的數控機床立柱優化設計,武漢工程大學學報,第40卷,第5期,569-574頁
[23]梅方華、陳五一,2013,基於整體葉輪加工後置資訊的五軸機床整體結構配置優化,製造技術與機床,第7期,94-98頁
[24]孫波、袁宇、朱林波,2014,精密臥式加工中心立柱的結構優化設計,製造業自動化,第36卷,第11期,41-43頁
[25]J. J. Zulaika, F. J. Campa, and L. N. Lopez De Lacalle, 2011, “An integrated processmachine approach for designing productive and lightweight milling machines,” International Journal of Machine Tools and Manufacture, Vol.51, No.7-8, pp.591-604, doi: 10.1016/j.ijmachtools.2011.04.003.
[26]B. Li, J. Hong, Z. Wang, W. Wu, and Y. Chen, 2012, “Optimal design of machine tool bed by load bearing topology identification with weight distribution criterion,” Procedia CIRP, Vol.3, No.1, pp.626-631, doi: 10.1016/j.procir.2012.07.107.
[27]J. D. Suh, D. G. Lee, and R. Kegg, 2002, “Composite machine tool structures for high speed milling machines,” CIRP Annals - Manufacturing Technology, Vol. 51, No.1, pp.285-288, doi: 10.1016/S0007-8506(07)61518-2.
[28]L. Liu, B. Yi, T. Wang, Z. Li, J. Zhang, and G. H. Yoon, 2021, “Investigation on numerical analysis and mechanics experiments for topology optimization of functionally graded lattice structure,” Additive Manufacturing, Vol.47, No.102275, doi: 10.1016/j.addma.2021.102275.
[29]R. P. Bohara, S. Linforth, T. Nguyen, A. Ghazlan, and T. Ngo, 2021, “Novel lightweight high-energy absorbing auxetic structures guided by topology optimization,” International Journal of Mechanical Sciences, Vol.211, No.106793, doi: 10.1016/j.ijmecsci.2021.106793.
[30]李冠辰,2021,工具機接合面剛性值估算與調整方法之研究,國立虎尾科技大學機械與電腦輔助工程系碩士班碩士論文。取自https://reurl.cc/e3kYWR[31]葉俊緯,2020,工具機輕量化分析與設計改善,立虎尾科技大學機械與電腦輔助工程系碩士班碩士論文。取自https://reurl.cc/55RnOy[32]陳宣彤,2018,拓樸最佳化應用於戟齒輪加工機結構設計與開發,國立中正大學工程學院機械工程學系碩士論文。取自https://reurl.cc/q5YeV0[33]準力機械股份有限公司。https://reurl.cc/WrO9OZ
[34]旭泰精密機械股份有限公司。https://reurl.cc/ErQdVv
[35]譜威科技顧問股份有限公司。https://reurl.cc/q5Yepg