摘要 i
Abstract ii
誌謝 iii
目錄 iv
表目錄 vi
圖目錄 vii
變數定義 xi
中英文名詞對照表 xii
第1章 緒論 1
1.1 研究背景 1
1.2 研究目的 6
1.3 研究架構 8
第2章 理論方法 9
2.1 切削扭矩 9
2.2 訊號擷取 12
2.2.1 應變規選用 12
2.2.2 惠斯登電橋 14
2.2.3 應變與電壓關係式 15
2.2.4 壓電感測刀把 16
2.2.5 壓電薄膜 17
2.2.6 應變規與壓電薄膜比較 18
第3章 系統開發 19
3.1 感測框之開發 19
3.1.1 不同結構設計之感測框受力比較 21
3.1.2 感測框材質比較 23
3.1.3 金屬感測框固定方式 25
3.1.4 不同貼法之應變電壓變化 27
3.1.5 應變資料收集 30
3.2 智慧刀把自動化校正系統開發 32
3.2.1 自動化校正系統開發 33
3.2.2 Torque校正軸向開發 34
3.2.3 Bending校正軸向開發 37
3.2.4 校正分析判定與結果 38
3.3 感測框之訊號衰減補償 40
第4章 案例研究與分析 41
4.1 重切削實驗 41
4.1.1 鑽孔實驗 41
4.1.2 側銑實驗 45
4.1.3 加重側銑實驗 48
4.2 精切削實驗 52
4.2.1 鑽孔實驗 52
4.3 STH-W與Spike比較 55
4.3.1 鑽孔實驗 55
4.3.2 側銑實驗 58
第5章 結論與未來展望 61
5.1 結論 61
5.2 未來展望 62
參考文獻 63

[1]P. Zhang, D. Gao, Y. Lu, F. Wang, and Z. Liao, “A novel smart toolholder with embedded force sensors for milling operations,” Mechanical Systems and Signal Processing, vol. 175, 2022.
[2]P. Zhang, D. Gao, Y. Lu, Z. Ma, X. Wang, and X. Song, “Cutting tool wear monitoring based on a smart toolholder with embedded force and vibration sensors and an improved residual network,” Measurement, vol.199, 2022.
[3]Z. Xie, Y. Lu & X. Chen, “A multi-sensor integrated smart tool holder for cutting process monitoring,” The International Journal of Advanced Manufacturing Technology, vol. 110, pp. 853-864, 2020.
[4]M. Rizal, J. A. Ghani, M. Z. Nuawi, and C. H. C. Haron, “Development and testing of an integrated rotating dynamometer on tool holder for milling process,” Mechanical systems and signal processing, vol. 52, pp. 559–576, 2015.
[5]F. Wu, Y. Li, B. Guo, and P. Zhang, “The Design of Force Measuring Tool Holder System Based on Wireless Transmission,” IEEE Access, vol. 6, pp. 38556-38566, May 18, July 2018.
[6]Y. Qin, Y. Zhao, Y. Li, Y. Zhao, and P. Wang, “A High Performance Torque Sensor for Milling Based on a Piezoresistive MEMS Strain Gauge,” Sensors, vol. 16, no. 513, 2016.
[7]沈佳慧，“開發具應變感測之無線刀把”，國立高雄第一科技大學電機工程研究所碩士論文，2017。
[8]黃丞睿，“精進智慧刀把訊號的校準與分析方法”，國立高雄第一科技大學電機工程研究所碩士論文，2021。
[9]L. Ma, S. N. Melkote, and J. B. Castle, “PVDF sensor-based monitoring of milling torque,” The International Journal of Advanced Manufacturing Technology, vol. 70, pp. 1603-1614, 2014.
[10]M. Luo, H. Luo, D. Axinte, D. Liu, J. Mei, and Z. Liao, “A wireless instrumented milling cutter system with embedded PVDF sensors,” Mechanical Systems and Signal Processing, vol. 110, pp. 556–568, 2018.
[11]Z. Xie, Y. Lu, and J. Li, “Development and testing of an integrated smart tool holder for four-component cutting force measurement,” Mechanical Systems and Signal Processing, vol. 93, pp. 225–240, 2017.
[12]V. Nguyen, S. Melkote, A. Deshamudre, and M. Khanna, “PVDF sensor based on-line mode coupling chatter detection in the boring process,” Manufacturing Letters, vol. 16, pp. 40–43, 2018.
[13]C. A. Suprock and J. S. Nichols, “A low cost wireless high bandwidth transmitter for sensor-integrated metal cutting tools and process monitoring,” International Journal of Mechatronics and Manufacturing Systems, vol. 2, pp. 441–454, 2009.
[14]軸的強度與應力，機械力學II，2021/01/12
SlidePlayer: https://slidesplayer.com/slide/15980385/
[15]應變規，三聯科技股份有限公司: 2020/11/25
http://www.sanlien.com.tw/wp-content/uploads/Strain-Gauges.pdf
[16]應變規 (Strain Gauge) 概述，NI: 2020/11/25
http://www.ni.com/zh-tw/innovations/white-papers/07/measuring-strain-with-strain-gages.html
[17]應變規基本原理與應用，三聯科技股份有限公司：2020/11/25
http://web.sanlien.com.tw/ad/san_tech.nsf/foundationview/1D17A4215508F43B482580DD0029BA7A/$FILE/%E4%B8%89%E8%81%AF%E6%8A%80%E8%A1%93103%E6%9C%9F-%E6%87%89%E8%AE%8A%E8%A6%8F%E5%9F%BA%E6%9C%AC%E5%8E%9F%E7%90%86%E8%88%87%E6%87%89%E7%94%A8.pdf