臺灣博碩士論文加值系統

目錄
第一章 緒論 1
1-1 前言 1
1-2 骨科器材產品介紹 3
1-2-1 骨科器材種類 3
1-2-2 骨釘種類與材質 4
1-3 材料介紹 6
1-3-1 聚乳酸 ( Polylactic Acid ) 6
1-3-2 聚己內酯 ( Polycaprolactone ) 7
1-4 研究動機與目的 8
1-5 論文架構 9
第二章 文獻回顧及原理說明 10
2-1 文獻回顧 10
2-1-1 生醫材料相關文獻 10
2-1-2 熱壓與拉伸試驗相關文獻 10
2-1-3 射出成形相關文獻 11
2-2 熱壓成形 12
2-3 示差掃描量熱法 ( Differential Scanning Calorimetry ) 13
2-4 接觸角檢測 14
2-5 射出成形 15
2-6 扭轉強度試驗 17
2-7 田口實驗法 17
第三章 實驗規劃 19
3-1 實驗流程 19
3-2 原料備製 20
3-3 材料混練 22
3-4 拉伸試件選用 23
3-5 試驗速率之選用 25
3-6 塑料用料計算與熱壓成形參數 26
3-7 DSC檢測 27
3-8 接觸角檢測 27
3-9 射出成形 27
3-10 扭轉強度試驗 28
3-11 田口實驗法 29
3-11-1 田口製程參數選定 29
第四章 實驗設備介紹 30
第五章 結果與討論 36
5-1 材料試驗 36
5-1-1 DSC量測 36
5-1-2 接觸角量測 44
5-1-3 拉伸試驗 46
5-2 射出成形 54
5-2-1 骨釘成形缺陷 54
5-2-2 骨釘短射試驗 55
5-2-3 成形視窗-聚乳酸 56
5-2-4 成形視窗-聚己內酯 58
5-2-5 成形視窗-聚乳酸和聚己內酯 60
5-2-6 田口實驗因子水準表建立 62
5-3 田口實驗結果 67
5-3-1 聚乳酸 67
5-3-2 S/N回應表與S/N回應圖-聚乳酸 68
5-3-3 品質改善效果評估-聚乳酸 69
5-3-4 變異數分析 (Analysis of Variance, ANOVA)-聚乳酸 71
5-3-5 聚己內酯 72
5-3-6 S/N回應表與S/N回應圖-聚己內酯 73
5-3-7 品質改善效果評估-聚己內酯 74
5-3-8 變異數分析 (Analysis of Variance, ANOVA)-聚己內酯 76
5-3-9 PLA+PCL_80+20% 77
5-3-10 S/N回應表與S/N回應圖-PLA+PCL_80+20% 78
5-3-11 品質改善效果評估- PLA+PCL_80+20% 79
5-3-12 變異數分析(Analysis of Variance, ANOVA)- PLA+PCL_80+20% 81
5-3-13 PLA+PCL_70+30% 82
5-3-14 S/N回應表與S/N回應圖-PLA+PCL_70+30% 83
5-3-15 品質改善效果評估-PLA+PCL_70+30% 84
5-3-16 變異數分析(Analysis of Variance, ANOVA)- PLA+PCL_70+30% 86
5-4 骨釘扭轉試驗 87
5-4-1 骨釘固定方式比較 87
5-4-2 骨釘埋入深度比較 89
5-4-3 骨釘破斷型式 90
5-5 實驗結果討論 92
5-5-1 熱壓成形試片 92
5-5-2 拉伸試驗 93
5-5-3 骨釘扭轉試驗 93
5-5-4 田口實驗 94
第六章 結論與未來展望 96
6-1 結論 96
6-2 未來展望 97
參考文獻 98

參考文獻
[1] 醫療器材產業趨勢：創新創業之機會與挑戰財團法人國家生技醫療產業策進會， Available at: https://taccplus.com/technews1018/, Accessed July 2022。
[2] 葉哲政，2005，金屬骨科器材市場分析，金屬中心。
[3] R. Agarwal, V. Gupta, and J. Singh, 2022, “Additive manufacturing-based design approaches and challenges for orthopaedic bone screws: a state-of-the-art review,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 44, Article number: 37.
[4] M. Prakasam, J. Locs, K. Salma-Ancane, D. Loca, A. Largeteau, and L. Berzina-Cimdina, 2017,” Biodegradable materials and metallic implants—a review,” Journal of Functional Biomaterials, Vol. 8, Issue 4, pp. 44.
[5] A. Samir, F.H. Ashour, A.A. Hakim, and M. Bassyouni, 2022, “Recent advances in biodegradable polymers for sustainable applications,” Npj Materials Degradation, Vol. 6, Article number: 68.
[6] W.J. Chong, S. Shen, Y. Li, A. Trinchi, D.P. Simunec, L. Kyratzis, A. Sola, and C. Wen, 2023, “Biodegradable PLA-ZnO nanocomposite biomaterials with antibacterial properties, tissue engineering viability, and enhanced biocompatibility,” Smart Materials in Manufacturing, Vol. 1, Article number: 100004.
[7] Y. Hu, W.A. Daoud, K.K.L. Cheuk, and C.S.K. Lin, 2016, “Newly developed techniques on polycondensation, ring-opening polymerization and polymer modification: Focus on poly (lactic acid),” Materials, Vol. 9, Issue 3, pp. 133.
[8] K.M. Nampoothiri, N.R. Nair, and R.P. John, 2010, “An overview of the recent developments in polylactide (PLA) research,” Bioresource Technology, Vol. 101, Issue 22, pp. 8493-8501.
[9] N.A.A.B. Taib, M.R. Rahman, D. Huda, K.K. Kouk, S. Hamdan, M.K.B. Bakri, M.R.M.B. Julaihi, and A. Khan, 2023, “A review on poly lactic acid (PLA) as a biodegradable polymer,” Polymer Bulletin, Vol. 80, pp. 1179-1213.
[10] L. Xiao, B. Wang, G. Yang, and M. Gauthier, 2012, “Poly (lactic acid)-based biomaterials: synthesis, modification and applications,” Biomedical Science, Engineering and Technology, Vol. 11, pp. 247-282.
[11] 陳忠吾、蕭耀貴，2010，生質材料聚乳酸PLA簡介，財團法人塑膠工業技術發展中心。
[12] V. Guarino, G. Gentile, L. Sorrentino, and L. Ambrosio, 2017, “Polycaprolactone: synthesis, properties, and applications,” Encyclopedia of Polymer Science and Technology, pp. 1-36.
[13] Z.U. Arif, M.Y. Khalid, R. Noroozi, A. Sadeghianmaryan, M. Jalalvand, and M. Hossain, 2022, “Recent advances in 3D-printed polylactide and polycaprolactone-based biomaterials for tissue engineering applications,” International Journal of Biological Macromolecules, Vol. 218, pp. 930-968.
[14] J.M. Ferri, O. Fenollar, A.J. Vilaplana, D.G. Sanoguera, and R. Balart, 2016, “Effect of miscibility on mechanical and thermal properties of poly (lactic acid)/polycaprolactone blends,” Polymer International, Vol. 65, Issue 4, pp. 453-463.
[15] 林紀穎，2018，生物可降解PCL骨釘微射出成形研究，國立高雄應用科技大學機械工程系碩士論文。
[16] R.A. Gross and B. Kalra, 2002, “Biodegradable polymers for the environment,” Science, Vol. 297, Issue 5582, pp. 803-807.
[17] L. Aliotta, V. Gigante, O. Acucella, F. Signori, and A. Lazzeri, 2020, “Thermal, mechanical and micromechanical analysis of PLA/PBAT/POE-g-GMA extruded ternary blends,” Frontiers in Materials, Vol. 7, Article number: 130.
[18] M. Barletta and M. Puopolo, 2019, “Thermo-mechanical properties of injection molded components manufactured by engineered biodegradable blends,” Journal of Polymers and the Environment, Vol. 27, pp. 2105-2118.
[19] C.C. Chen, J.Y. Chueh, H. Tseng, H.M. Huang, and S.Y. Lee, 2003, “Preparation and characterization of biodegradable PLA polymeric blends,” Biomaterials, Vol. 24, Issue 7, pp. 1167-1173.
[20] K.N.S. Suman, V.V.S.K. Rao, and K. Bhanukiran, 2011, “Study of Rheological and Mechanical Properties of Biodegradable. Polylactide and Polycaprolactone Blends,” International Journal of Engineering Science and Technology, Vol. 3, pp. 6259-6264.
[21] J. Urquijo, G.G. Echevarria, J.I. Eguiazabal, 2015, “Melt processed PLA/PCL blends: Effect of processing method on phase structure, morphology, and mechanical properties,” Journal of Applied Polymer Science, Vol. 132, Issue 41, pp. 42641.
[22] 熱成型、擠製成型、射出成型、焊接、發泡成型、吹氣成型與鑄造成型之七種塑膠產品製程初認識， Available at: https://mag.addmaker.tw/2021/03/23/7-plastic-production-process/, Accessed July 2023。
[23] 高分子微結構薄膜的熱壓成型技術與應用，Available at: http://apmf.kuas.edu.tw/laboratory/高分子功能性聯盟-ployfilm/docs/page42-7.pdf, Accessed July 2023。
[24] J. Jaafar, J.P. Siregar, C. Tezara, M.H. M. Hamdan, and T. Rihayat, 2019, “A review of important considerations in the compression molding process of short natural fiber composites,” The International Journal of Advanced Manufacturing Technology, Vol. 105, pp. 3437-3450.
[25] 熱分析-DSC 熱示差掃描分析儀的原理及應用介紹，Available at: https://www.techmaxasia.com/knowledge-detail/DSC-20210208/, Accessed July 2023。
[26] 結晶度-教育百科， Available at: https://pedia.cloud.edu.tw/Entry/Detail/?title=結晶度&search=結晶度/, Accessed July 2023。
[27] Y. Kong and J.N. Hay, 2002, “The measurement of the crystallinity of polymers by DSC,” Polymer, Vol. 43, Issue 14, pp. 3873-3878.
[28] 接觸角原理， Available at：https://www.amtech.com.tw/custom_61349.html/, Accessed July 2023。
[29] H. Fu, H. Xu, Y. Liu, Z. Yang, S. Kormakov, D. Wu, and J. Sun, 2020, “Overview of injection molding technology for processing polymers and their composites,” ES Materials & Manufacturing, Vol. 8, pp. 3-23.
[30] 塑膠射出是什麼， Available at：https://www.edex.com.tw/blog-detail/What-is-plastic-injection, Accessed July 2023。
[31] 黃俊欽，2020，塑膠模具設計分析講義，國立高雄科技大學模具工程系碩士課程。
[32] 什麼是扭轉試驗，Available at:https://www.instron.com/zh-tw/our-company/library/test-types/torsion-test/,Accessed July 2023。
[33] S.G.N. Shimano and A.C. Shimano, 2008, “Behavior of cortical screws submitted to manual torsion assay and automated torsion assay,” Acta Ortopédica Brasileira, Vol. 16, Issue 2, pp. 81-84.
[34] G.J. Bujis, E.B. Van, and B. Stegenga, 2007, “Torsion strength of biodegradable and titanium screws: A comparison,” Journal of Oral and Maxillofacial Surgery, Vol. 65, Issue 11, pp. 2142-2147.
[35] 李輝煌，2020，田口方法:品質設計的原理與實務第四版，高立圖書公司。
[36] A. Hoglund, K. Odelius, and A.C. Albertsson, 2012, “Crucial differences in the hydrolytic degradation between industrial polylactide and laboratory-scale poly (L-lactide),” ACS Applied Materials & Interfaces, Vol. 4, pp. 2788-2793.
[37] Product Data Sheet – Total Energies Corbion. ， Available at: https://www. Totalenergies-corbion.com/media/eushodia/pds-luminy-l175-190507.pdf, Accessed July 2023.
[38] N. Noroozi, J.A. Thomson, N. Noroozi, L.L. Schafer, and S.G. Hatzikiriakos, 2012, “Viscoelastic behaviour and flow instabilities of biodegradable poly (ε-caprolactone) polyesters,” Rheologica Acta, Vol. 51, pp. 179-192.
[39] Micromoulding: consideration of processing effects on medical materials， Available at: https://slideplayer.com/slide/249490/, Accessed July 2023.
[40] I. N. Baena, V. Sessini, F. Dominici, L. Torre, J.M. Kenny, and L. Peponi, 2016, “Design of biodegradable blends based on PLA and PCL: From morphological, thermal and mechanical studies to shape memory behavior,” Polymer degradation and stability, Vol. 132, pp. 97-108.
[41] J. Chen, C. Deng, R. Hong, Q. Fu, and J. Zhang, 2020, “Effect of thermal annealing on crystal structure and properties of PLLA/PCL blend,” Journal of Polymer Research, Vol. 27, Article number: 221, pp. 1-11.
[42] Ingevity CAPA 6800 - Quote or Samples - Thermoplastic Polycaprolactone, Available at: https://www.tri-iso.com/ingevity_capa_6800.html, Accessed July 2023.
[43] C. Zhang, Q. Lan, T. Zhai, S. Nie, J. Luo, and W. Yan, 2018,” Melt crystallization behavior and crystalline morphology of polylactide/poly (ε-caprolactone) blends compatibilized by lactide-caprolactone copolymer,” Polymers, Vol. 10, Issue 11, pp. 1181.