|
[1] RICE FARMING IN JAPAN: HISTORY, ECOLOGY AND MECHANIZATION-http://factsanddetails.com/japan/cat24/sub159/item939.html
[2] RICE: ITS HISTORY, AGRICULTURE, PRODUCTION AND RESEARCH- http://factsanddetails.com/world/cat54/sub343/item1580.html
[3] B. R. Miao, Y. X. Luo, Q. M. Peng, Y. Z. Qiu, H. Chen, and Z. K. Yang, "Multidisciplinary design optimization of lightweight carbody for fatigue assessment,” Materials and Design Vol. 194, pp.1-10 (2020).
[4] 謝廣文, 余志軒, 吳文鑌, 洪滉祐, "電動中耕除草機節能減碳效益及對操作者之影響", 農林學報, Vol. 62, No. 4, pp.319-329 (2013).
[5] Duk Hee HAN, “Operations analysis of 75kW over agricultural tractor”,JunNam University, 2011.
[6] Zhang, Min, Chang Sheng Zhou, and Wen Yi Zhang. "Summary on Design and Analysis Method of Transplanting Mechanism of High Performance Rice Transplanter." Applied Mechanics and Materials. Vol. 321, pp.2439-2443. Trans Tech Publications Ltd, 2013.
[7] Gennaro Monacelli,” The future of Simulation in Agricultural Machinery towards 2050!”, International CAE Conference and Exhibition, 8th - 9th October At: Vicenza, Italy, 2018.
[8] Jiangtao, Ji, et al. "High-efficiency modal analysis and deformation prediction of rice transplanter based on effective independent method." Computers and Electronics in Agriculture Vol. 168 , 2020.
[9] 谷林科技股份有限公司，旱田除草犁具，1975。(https://www.kulin.com.tw/product_1363211.html)
[10] 陳炯松，台灣農業機械發展史，財團法人中正農業科技社會公益基金會，2003。
[11] Mushiri, Tawanda, Brighton Gutsa, and Charles Mbohwa. "Design of a rice transplanter for zimbabwean farmers." (2013).
[12] Guru, P. K., Chhuneja, N. K., Dixit, A., Tiwari, P., & Kumar, A. “Mechanical transplanting of rice in India: status, technological gaps and future thrust.” Oryza, Vol. 55, lss 1, pp. 100-106. 2018.
[13] D.N.V.Chaitanyaa, Arunkumar Sa*, G. Bhanu Akhilesha, G. Saikiran kumara, K.N.V.S. Avinash Babua. “Design of rice transplanter”, International Conference on Mechanical, Materials and Renewable Energy IOP Publishing IOP Conf. Series: Materials Science and Engineering 377 (2018).
[14] Kumbhar, Satish, et al. "Design Analysis and Fabrication of Manual Rice Transplanter," International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Iss. 3, 2017.
[15]范植晟，行走式四棵插秧機田裡下著大雨認真工作，2019。(https://i.ytimg.com/vi/CdOEkLCQ8uY/maxresdefault.jpg)
[16] Stolarski, Tadeusz, Yuji Nakasone, and Shigeka Yoshimoto. Engineering analysis with ANSYS software. Butterworth-Heinemann, 2018.
[17] 李輝煌，ANSYS工程分析基礎與觀念，高立圖書有限公司，台灣，1999。
[18] Akash Singh Patel and Jaideep Chitransh, “DESIGN AND ANALYSIS OF TATA 2518TC TRUCK CHASSIS FRAME WITH VARIOUS CROSS SECTIONS USING CAE TOOLS,” INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY, Val. 3, 2016.
[19] Biriș, S. Ș., et al. "Stress and strains distribution in the frame of agricultural cultivators using the Finite Element Method." Proceedings of the 44th International Symposium on Agricultural Engineering: Actual Tasks on Agricultural Engineering, Opatija, Croatia, 23-26 February 2016. University of Zagreb, Faculty of Agriculture, 2016.
[20] 黃志新，ANSYS nCode DesignLife，人民郵電出版社，2016。
[21] Papadopoulos, I. V. "A high‐cycle fatigue criterion applied in biaxial and triaxial out‐of‐phase stress conditions." Fatigue & Fracture of Engineering Materials & Structures 18.1 pp. 79-91, 1995.
[22] 林根源，應用路況模擬技術進行車輛耐久性驗證與舒適性評估研究，國立中央大學，2010。
[23] Alam, Parvez, et al. "The fatigue of carbon fibre reinforced plastics-A review." Composites Part B: Engineering Vol. 166, pp. 555-579, 2019.
[24] 郭承憲，機車系統動態模擬及耐久性分析，2002，國立國防大學。
[25] Meeker, William Q. "A comparison of accelerated life test plans for Weibull and lognormal distributions and type I censoring." Technometrics 26.2 pp. 157-171, 1984.
[26] 陈志, et al. "玉米收获机底盘车架疲劳寿命研究." Transactions of the Chinese Society of Agricultural Engineering 31.20 (2015).
[27] Eng, B., A. Holzhauer, and J. Katzameyer. "Methodology for accelerated durability testing of agricultural machinery." 2015.
[28] MATACHE, Mihai Gabriel, et al. "ACCELERATED TESTING OF AGRICULTURAL MACHINERY WITH VARIABLE AMPLITUDE LOADING." U.P.B. Sci. Bull., Series D, Vol. 78, Iss. 2, 2016
[29] 陳建華、王俊翔、毛顯紅、周云平、歐甚華、務運興，中華人民共和國專利CN 105718633 B，2019。
[30] Yagiz, Nurkan, and L. Emir Sakman. "Vibrations of a rectangular bridge as an isotropic plate under a traveling full vehicle model." Journal of Vibration and Control 12.1 pp. 83-98, 2006.
|