臺灣博碩士論文加值系統

本論文認為隨著環保意識抬頭，綠色產品也將成為人們追尋的目標，本研究以機械製造產業為例，從綠色精實的觀點出發，使用重要度-績效度分析(IPA)以及品質機能展開(QFD)來探討產品開發的策略是否符合綠色精實，以此為依據提出機械製造產業在產品開發過程中，要如何選擇有效且符合綠色精實需求的資源策略。首先從IPA的分析結果確認目標對綠色精實及產品開發的重要性；再經由 QFD找出產品綠色精實技術特性中相對於其他特性重要的前三項；最後，使用「應用電弧爐集塵灰回收創新設計評估模式開發設計之研究」的產品設備技術需求表，以驗證其對綠色精實特性的影響，結果發現影響相對重要的前兩項為「降低環境汙染率」和「降低環境成本」，代表機械製造業在執行產品開發時應優先考慮這兩項技術。

With the improvement of environmental protection awareness, green products have also become people's pursuit. This study takes the machinery manufacturing industry as an example. From a product development perspective, it applies importance-performance analysis (IPA) and quality function development (QFD) to develop products. It is recommended that in the product development process, an effective resource strategy be adopted to meet the green lean needs of the product. First, based on the analysis results of the importance-performance analysis, the importance of targets for green lean and product development was determined. Then the first three relatively important technical characteristics of green lean of products were determined through QFD. Finally, verify the impact of the product and equipment technology requirements table of "Research and Develop use innovative evaluation model tools in the Electric Arc Furnace Dust recovery" on the green lean characteristics. It was found that the first two items that had relatively important impacts were "reducing environmental pollution rates" and "reducing environmental costs", indicating that the two technologies should be given priority consideration by the machinery manufacturing industry when implementing product development.

中文摘要......i
英文摘要......ii
誌謝......iii
目錄......iv
表目錄......v
圖目錄......vi
第一章 緒論......1
1.1 研究動機......1
1.2 研究目的......1
1.3 研究流程......2
第二章 文獻探討......3
2.1 永續發展......3
2.2 生態效益......6
2.3 精實產品開發......6
2.4 綠色精實......7
2.5 機械製造業......8
2.6 重要度-績效分析......8
2.7 品質機能展開......9
2.8 使用IPA與QFD排序之文獻......9
第三章 研究方法......10
3.1 永續發展指標篩選......10
3.2 指標權重值計算......11
3.3 實例驗證......14
第四章 問卷調查與分析......15
4.1 永續發展目標的重要度......15
4.2 綠色精實對永續發展目標的QFD關係矩陣......17
第五章 實例驗證......19
第六章 結論與建議......22
參考文獻......23
附錄一......27
英文論文大綱......34

1.中華民國勞動部，2017-2019，「機械設備製造業」，網址https://www.mol.gov.tw/media/1674/ac15.pdf，2020年5月10日。
2.黃柏松，2019，「應用電弧爐集塵灰回收創新設計評估模式開發設計之研究」，國立勤益科技大學工業工程與管理系碩士論文。
3.楊錦洲，李鴻生，2010，精實生產教戰守則，中華民國品質學會出版委員會，中華民國品質學會，台北。
4.Abreu, M. F., Alves, A. C., & Moreira, F. (2019). “The Lean-Green BOPSE Indicator to Assess Efficiency and Sustainability”, In Lean Engineering for Global Development (pp. 259-291), Springer, Cham.
5.Boggia, A., Massei, G., Paolotti, L., Rocchi, L., & Schiavi, F. (2018). “A model for measuring the environmental sustainability of events”, Journal of environmental management, 206, 836-845.
6.Caldera, H. T. S., Desha, C., & Dawes, L. (2017). “Exploring the role of lean thinking in sustainable business practice: A systematic literature review”, Journal of Cleaner Production, 167, 1546-1565.
7.Chan, L. K., & Wu, M. L. (2002). “Quality function deployment: A literature review”, European journal of operational research, 143(3), 463-497.
8.Cherrafi, A., Elfezazi, S., Chiarini, A., Mokhlis, A., & Benhida, K. (2016). “The integration of lean manufacturing, Six Sigma and sustainability: A literature review and future research directions for developing a specific model”, Journal of Cleaner Production, 139, 828-846.
9.Ciccullo, F., Pero, M., Caridi, M., Gosling, J., & Purvis, L. (2018). “Integrating the environmental and social sustainability pillars into the lean and agile supply chain management paradigms: A literature review and future research directions”, Journal of Cleaner Production, 172, 2336-2350.
10.Clark, K. B., & Fujimoto, T. (1989). “Lead time in automobile product development explaining the Japanese advantage”, Journal of Engineering and Technology Management, 6(1), 25-58.
11.Fercoq, A., Lamouri, S., & Carbone, V. (2016). “Lean/Green integration focused on waste reduction techniques”, Journal of Cleaner production, 137, 567-578.
12.Furqon, C., Sultan, M. A., & Putri, S. I. (2019, May). “Quality Function Deployment Analysis on Transportation Services.” In 1st International Conference on Economics, Business, Entrepreneurship, and Finance (ICEBEF 2018). Atlantis Press.
13.Garza-Reyes, J. A. (2015). “Lean and green–a systematic review of the state of the art literature”, Journal of Cleaner Production, 102, 18-29.
14.GRI. (2016). Global reporting initiative. Retrieved October, 2016, from https://www.globalreporting.org/standards/gri-standards-download-center/. 2020/06/28.
15.Gupta, A. K., & Wilemon, D. L. (1990). “Accelerating the development of technology-based new products”, California management review, 32(2), 24-44.
16.Haque, B. (2003). “Lean engineering in the aerospace industry”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 217(10), 1409-1420.
17.Harik, R., El Hachem, W., Medini, K., & Bernard, A. (2015). “Towards a holistic sustainability index for measuring sustainability of manufacturing companies”, International Journal of Production Research, 53(13), 4117-4139.
18.Helleno, A. L., de Moraes, A. J. I., & Simon, A. T. (2017). “Integrating sustainability indicators and Lean Manufacturing to assess manufacturing processes: Application case studies in Brazilian industry”, Journal of cleaner production, 153, 405-416.
19.Jasti, N. V. K., & Kodali, R. (2015). “Lean production: literature review and trends”, International Journal of Production Research, 53(3), 867-885.
20.Kim, D. B., Shin, S. J., Shao, G., & Brodsky, A. (2015). “A decision-guidance framework for sustainability performance analysis of manufacturing processes”, The International Journal of Advanced Manufacturing Technology, 78(9-12), 1455-1471.
21.Luqmani, A., Leach, M., & Jesson, D. (2017). “Factors behind sustainable business innovation: The case of a global carpet manufacturing company”, Environmental Innovation and Societal Transitions, 24, 94-105.
22.Martilla, J. A., & James, J. C. (1977). “Importance-performance analysis”, Journal of marketing, 41(1), 77-79.
23.Moldavska, A., & Welo, T. (2017). “The concept of sustainable manufacturing and its definitions: A content-analysis based literature review”, Journal of Cleaner Production, 166, 744-755.
24.Oh, H. (2001). “Revisiting importance–performance analysis”, Tourism management, 22(6), 617-627.
25.Pedersen, C. S. (2018). “The UN Sustainable Development Goals (SDGs) are a great gift to business!” Procedia CIRP, 69, 21-24.
26.Qu, Y., Liu, Y., Nayak, R. R., & Li, M. (2015). “Sustainable development of eco-industrial parks in China: effects of managers' environmental awareness on the relationships between practice and performance”, Journal of Cleaner Production, 87, 328-338.
27.Ramos, A. R., Ferreira, J. C. E., Kumar, V., Garza-Reyes, J. A., & Cherrafi, A. (2018). “A lean and cleaner production benchmarking method for sustainability assessment: A study of manufacturing companies in Brazil”, Journal of Cleaner Production, 177, 218-231.
28.Ruiz-Benitez, R., López, C., & Real, J. C. (2017). “Environmental benefits of lean, green and resilient supply chain management: The case of the aerospace sector”, Journal of Cleaner Production, 167, 850-862.
29.Sengupta, D., Mukherjee, R., & Sikdar, S. K. (2015). “Environmental sustainability of countries using the UN MDG indicators by multivariate statistical methods”, Environmental Progress & Sustainable Energy, 34(1), 198-206.
30.Souza, J. P. E., & Alves, J. M. (2018). “Lean-integrated management system: A model for sustainability improvement”, Journal of Cleaner Production, 172, 2667-2682.
31.Stalk, G. (1988). Time--the next source of competitive advantage.
32.Tasdemir, C., & Gazo, R. (2018). “A systematic literature review for better understanding of lean driven sustainability”, Sustainability, 10(7), 2544.
33.Thomke, S., & Fujimoto, T. (2000). “The effect of “front‐loading” problem‐solving on product development performance”, Journal of Product Innovation Management: AN INTERNATIONAL PUBLICATION OF THE PRODUCT DEVELOPMENT & MANAGEMENT ASSOCIATION, 17(2), 128-142.
34.Desa, U. N. (2016). Transforming our world: The 2030 agenda for sustainable development.
35.Verrier, B., Rose, B., & Caillaud, E. (2016). “Lean and Green strategy: the Lean and Green House and maturity deployment model”, Journal of cleaner production, 116, 150-156.
36.Vimal, K. E. K., Vinodh, S., & Muralidharan, R. (2015). “An approach for evaluation of process sustainability using multi-grade fuzzy method”, International Journal of Sustainable Engineering, 8(1), 40-54.
37.Wagner, M. (2015). “The link of environmental and economic performance: Drivers and limitations of sustainability integration”, Journal of Business Research, 68(6), 1306-1317.
38.Wakeford, J. J., Gebreeyesus, M., Ginbo, T., Yimer, K., Manzambi, O., Okereke, C., ... & Mulugetta, Y. (2017). “Innovation for green industrialisation: An empirical assessment of innovation in Ethiopia's cement, leather and textile sectors”, Journal of Cleaner Production, 166, 503-511.
39.WBCSD/UNEP. (1998). Cleaner production and eco-efficiency: Complementary approaches to sustainable development (WBCSD and UNEP ed.).
40.Weissbrod, I., & Bocken, N. M. (2017). “Developing sustainable business experimentation capability–A case study”, Journal of Cleaner Production, 142, 2663-2676.