|
1. Marini, D., et al., Three pass incremental sheet forming: A new strategy for the manufacture of brass musical instruments. Journal of Manufacturing Processes, 2022. 73: p. 483-495. 2.Jackson, K. and J. Allwood, The mechanics of incremental sheet forming. Journal of materials processing technology, 2009. 209(3): p. 1158-1174. 3.https://www.tomleemusic.com.hk/blogs/wind/trumpet-maintenance. 4.Edward, L., Apparatus and process for incremental dieless forming. 1967, Google Patents. 5.Iseki, H. and T. Naganawa, Vertical wall surface forming of rectangular shell using multistage incremental forming with spherical and cylindrical rollers. Journal of materials processing technology, 2002. 130: p. 675-679. 6.Matsubara, S., et al., Apparatus for dieless forming plate materials. 2001, Google Patents. 7.Bahloul, R., H. Arfa, and H. BelHadjSalah, A study on optimal design of process parameters in single point incremental forming of sheet metal by combining Box–Behnken design of experiments, response surface methods and genetic algorithms. The International Journal of Advanced Manufacturing Technology, 2014. 74: p. 163-185. 8.Echrif, S. and M. Hrairi, Research and progress in incremental sheet forming processes. Materials and Manufacturing Processes, 2011. 26(11): p. 1404-1414. 9.Xu, P., et al., Experimental and numerical studies on two-point incremental forming of woven fabric composite sheet. Journal of Manufacturing Processes, 2023. 85: p. 205-215. 10.胡秉淳、曾俊豪、李宥樂,「板料數位控制漸進成形工法概況與市場未來趨勢」,漸進成形及其應用,第12卷,第441期,第31-36頁,2019. 11.Skjoedt, M., N. Bay, and T. Lenau, Rapid prototyping by single point incremental forming of sheet metal. PhD Project, Department of Mechanical Engineering, Technical University of Denmark, 2008. 12.Gatea, S., H. Ou, and G. McCartney, Review on the influence of process parameters in incremental sheet forming. The International Journal of Advanced Manufacturing Technology, 2016. 87: p. 479-499. 13.Romero, P.E., et al., Use of the support vector machine (SVM) algorithm to predict geometrical accuracy in the manufacture of molds via single point incremental forming (SPIF) using aluminized steel sheets. journal of materials research and technology, 2021. 15: p. 1562-1571. 14.Chang, Z., M. Li, and J. Chen, Analytical modeling and experimental validation of the forming force in several typical incremental sheet forming processes. International Journal of Machine Tools and Manufacture, 2019. 140: p. 62-76. 15.Kim, T. and D.-Y. Yang, Improvement of formability for the incremental sheet metal forming process. International Journal of Mechanical Sciences, 2000. 42(7): p. 1271-1286. 16.Jeswiet, J. and D. Young, Forming limit diagrams for single-point incremental forming of aluminium sheet. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2005. 219(4): p. 359-364. 17.Silva, M., et al., Revisiting the fundamentals of single point incremental forming by means of membrane analysis. International Journal of Machine Tools and Manufacture, 2008. 48(1): p. 73-83. 18.Duflou, J.R., et al., Single point incremental forming: state-of-the-art and prospects. International Journal of Material Forming, 2018. 11: p. 743-773. 19.Afonso, D., R. Alves de Sousa, and R. Torcato, Integration of design rules and process modelling within SPIF technology-a review on the industrial dissemination of single point incremental forming. The International Journal of Advanced Manufacturing Technology, 2018. 94: p. 4387-4399. 20.McAnulty, T., J. Jeswiet, and M. Doolan, Formability in single point incremental forming: A comparative analysis of the state of the art. CIRP Journal of Manufacturing Science and Technology, 2017. 16: p. 43-54. 21.Sbayti, M., R. Bahloul, and H. Belhadjsalah, Efficiency of optimization algorithms on the adjustment of process parameters for geometric accuracy enhancement of denture plate in single point incremental sheet forming. Neural Computing and Applications, 2020. 32: p. 8829-8846. 22.Stoerkle, D.D., et al. Machine learning in incremental sheet forming. in Proceedings of ISR 2016: 47st International Symposium on Robotics. 2016. VDE. 23.Khan, M.S., et al., An intelligent process model: predicting springback in single point incremental forming. The International Journal of Advanced Manufacturing Technology, 2015. 76: p. 2071-2082. 24.Akrichi, S., et al., Roundness and positioning deviation prediction in single point incremental forming using deep learning approaches. Advances in Mechanical Engineering, 2019. 11(7): p. 1687814019864465. 25.Thiery, S., et al., Closed-loop control of product geometry by using an artificial neural network in incremental sheet forming with active medium. International Journal of Material Forming, 2021. 14: p. 1319-1335. 26.Wuest, T., C. Irgens, and K.-D. Thoben, An approach to monitoring quality in manufacturing using supervised machine learning on product state data. Journal of Intelligent Manufacturing, 2014. 25: p. 1167-1180. 27.Priore, P., et al., Learning-based scheduling of flexible manufacturing systems using ensemble methods. Computers & Industrial Engineering, 2018. 126: p. 282-291. 28.Lee, J., et al., Implementation of cyber-physical production systems for quality prediction and operation control in metal casting. Sensors, 2018. 18(5): p. 1428. 29.Aoyagi, K., et al., Simple method to construct process maps for additive manufacturing using a support vector machine. Additive manufacturing, 2019. 27: p. 353-362. 30.Fritzen, D., et al., Brass 70/30 and incremental sheet forming process. Key Engineering Materials, 2013. 554: p. 1419-1431. 31.Fritzen, D., et al. SPIF of Brass alloys: Preliminary studies. in AIP Conference Proceedings. 2016. AIP Publishing. 32.Jawale, K., et al. Methology To Characterize Fracture Forming Limits in Sheet Metal. in Proceedings of the 7th International Conference on Mechanics and Materials in Design Albufeira/Portugal. 2017. 33.Reddy, A.C., Pilot Studies on Single Point Incremental Forming Process for Hyperbolic Brass Cups. International Journal of Scientific & Engineering Research, 2017. 8(1): p. 977-982. 34.Kumar, Y. and S. Kumar. Design and development of single point incremental sheet forming machine. in 5th International & 26th All India Manufacturing Technology, Design and Research Conference. 2014. 35.Al-Attaby, Q.M.D., T.F. Abaas, and A.S. Bedan, The Effect of Tool Path Strategy on Mechanical Properties of Brass (65-35) in Single Point Incremental Sheet Metal Forming (SPIF). Journal of Engineering, 2013. 19(5): p. 629-636. 36.Ashouri, R. and H. Shahrajabian, Experimental investigation of incremental forming process of bilayer hybrid brass/St13 sheets. ADMT Journal, 2017. 10(3): p. 127-135. 37.Al-Ghamdi, K. and G. Hussain, SPIF of Cu/steel clad sheet: annealing effect on bond force and formability. Materials and Manufacturing Processes, 2016. 31(6): p. 758-763. 38.台灣三柱MISUMI股份有限公司產品型錄,工程塑膠(POM),型號RDJJS. 39.Silva, M., et al., Single‐point incremental forming and formability—failure diagrams. The journal of strain analysis for engineering design, 2008. 43(1): p. 15-35. 40.Lu, B., et al., Mechanism investigation of friction-related effects in single point incremental forming using a developed oblique roller-ball tool. International Journal of Machine Tools and Manufacture, 2014. 85: p. 14-29.
|