|
[1]V. Etacheri, R. Marom, Challenges in the development of advanced Li-ion batteries: a review, Energy & Environmental Science, Issue 9, 2011 [2]N. Nitta, F. Wu, Li-ion battery materials: present and future, materialstoday, Volume 18, Issue 5, June 2015 [3]B. Chapman, How does a lithium-Ion battery work, let’s talk science, September 23, 2019 [4]C. Liu, Z.-G. Neale and G. Cao, Understanding electrochemicalpotentials of cathode materialsin rechargeable batteries, materialstoday Volume 19, Number 2, March 2016 [5]P. Wang, J. Zheng, The present situation and expectation of lithium-ion battery, Chinese Journal of Nature, Volume 39, September 12 2017 [6]Z. Wu, Q. Li, Ordered Mesoporous Crystalline γ-Al2O3 with Variable Architecture and Porosity from a Single Hard Template, Journal of the American Chemical Society, Aug 11, 2010 [7]J. Wei, Y. Ren, Ordered Mesoporous Alumina with Ultra-Large Pores as an Efficient Absorbent for Selective Bioenrichment, Chemistry of Materials, February 24, 2017 [8]Z. Zeng, X. Huang, Z. Yin, Fabrication of graphene nanomesh by using an anodic aluminum oxide membrane as a template, Special Issue: Materials Research at Nanyang Technological University, Singapore, August 8, 2012 [9]L.-J. Chen, Tunable photoluminescence emission from Cadmium Tellurium nanorods with ethylenediamine template-assistance at a low temperature, Materials Letters, Volume 101, 15 June 2013 [10] L. Ma, Z. Wei, F. Zhang, X. Wu, Synthesis and characterization of high-ordered CdTe nanorods, Superlattices and Microstructures, Volume 88, December 2015 [11] H. Niu, M. Gao, Diameter-tunable CdTe nanotubes templated by 1D nanowires of cadmium thiolate polymer, Angewandte Chemie International Edition, 29 September 2006 [12] G. Smith, B. Sherin, Fuel cells – Proton-exchange membrane fuel cell | PEMFC: History, introduction, overview, applications, market, Reference Module in Chemistry, Molecular Sciences and Chemical Engineering, 2023 [13] I. Lisovskyi, S. Solopan, An effective modification of LiNi0.6CO0.2Mn0.2O2 with Li1.3Al0.3Ti1.7(PO4)3 as a high-performance cathode material for Li-ion batteries, Journal of Applied Electrochemistry, 22 July 2022 [14] L. Liao, X. Cheng, Fluoroethylene carbonate as electrolyte additive to improve low temperature performance of LiFePO4 electrode, Electrochimica Acta, Volume 87, 1 January 2013 [15] Q. Wang, J. Sun, Thermal stability of LiPF6/EC + DEC electrolyte with charged electrodes for lithium ion batteries, Thermochimica Acta, Volume 437, Issues 1–2, 15 October 2005 [16] H. Shi, W. Cho, H. Jang, Electrochemical properties of carbon- coated LiFePO4 cathode using graphite, carbon black, and acetylene black, Electrochimica Acta, Volume 52, Issue 4, 1 December 2006 [17] C. Cheng, Growth of carbon nanotubes on porous anodic alumina oxide surface and its application in DMFC, National Kaohsiung University of Applied Science, July 2011 [18] A. Tamburrano, B. Vivo, Effect of electric field polarization and temperature on the effective permittivity and conductivity of porous anodic aluminium oxide membranes, Microelectronic Engineering, Volume 88, Issue 11, November 2011 [19] F. Coz, L. Arurault, S. Fontorbes, V. Vilar, Chemical composition and structural changes of porous templates obtained by anodising aluminium in phosphoric acid electrolyte, surface and interface analysis, 19 February 2010 [20] Mata-Zamora M.E., Saniger J.M., Thermal evolution of porous anodic aluminas: A comparative study, Volume 51, Issue 5, October 2005 [21] U. K. Chime, F. I. Ezema, Porosity and hole diameter tuning on nanoporous anodic aluminium oxide membranes by one-step anodization, Optik, Volume 174, December 2018
|