[1]S. Pantelakis, and K. Tserpes, 2020, Revolutionizing Aircraft Materials and Processes, Springer Nature Switzerland AG, Cham.
[2]B. Wang, et al., 2023, “A review on prediction and control of curing process-induced deformation of continuous fiber-reinforced thermosetting composite structures”, Composites Part A:Applied Science Manufacturing, Vol.165, p.107321, February.
[3]G. Twigg, A. Poursartip and G. Fernlund, 2004, “Tool–part interaction in composites processing. Part II:numerical modelling”, Composites Part A:Applied Science Manufacturing, Vol.35, No.1, pp.135–141, January.
[4]W. Qiao and W. Yao, 2020, “Modelling of Process-Induced Deformation for Composite Parts Considering Tool-Part Interaction”, Materials, Vol.13, No.20, p.4503, October.
[5]Z. Yuan, Y. Wang, X. Peng, J. Wang and S. Wei, 2016, “An analytical model on through-thickness stresses and warpage of composite laminates due to tool-part interaction”, Composites Part B:Engineering, Vol.91, pp.408–413, April.
[6]Y. Chen, et al., 2023, “Manufacturing Technology of Lightweight Fiber-Reinforced Composite Structures in Aerospace: Current Situation and toward Intellectualization”, Aerospace, Vol.10, No.3, p. 206, January.
[7]Z. LIU, et al., 2022, “An alternative method to reduce process-induced deformation of CFRP by introducing prestresses”, Chinese Journal of Aeronautics, Vol.35, No.8, pp.314–323, August.
[8]B. Wucher, et al., 2014, “Tooling geometry optimization for compensation of cure-induced distortions of a curved carbon/epoxy C-spar”, Composites Part A:Applied Science and Manufacturing, Vol.56, pp.27–35, January.
[9]W. K. Jung, et al., 2006, “Fabrication of radar absorbing structure (RAS) using GFR-nano composite and spring-back compensation of hybrid composite RAS shells”, Composite Structures, Vol.75, No.1–4, pp.571–576, September.
[10]E. Kappel, 2018, “Compensating process-induced distortions of composite structures: A short communication”, Composite Structures, Vol.192, pp.67–71, May.
[11]M. Abouhamzeh, et al., 2015, “Closed form expression for residual stresses and warpage during cure of composite laminates”, Composite Structures, Vol.133, pp.902–910, December.
[12]C. Albert and G. Fernlund, 2002, “Spring-in and warpage of angled composite laminates”, Composites Science Technology, Vol.62, No.14, pp.1895–1912, November.
[13]C. Bellini and L. Sorrentino, 2018, “Analysis of cure induced deformation of CFRP U-shaped laminates”, Composite Structures, Vol.197, pp.1–9, August.
[14]K. Takagaki, S. Minakuchi and N. Takeda, 2017, “Process-induced strain and distortion in curved composites. Part II: Parametric study and application”, Composites Part A:Applied Science and Manufacturing, Vol.103, pp.219–229, December.
[15]O. G. Kravchenko, S. G. Kravchenko and R. B. Pipes, 2017, “Cure history dependence of residual deformation in a thermosetting laminate”, Composites Part A:Applied Science and Manufacturing, Vol.99, pp.186–197, August.
[16]E. Kappel, D. Stefaniak and C. Hühne, 2013, “Process distortions in prepreg manufacturing – An experimental study on CFRP L-profiles”, Composite Structures, Vol.106, pp.615–625, December.
[17]L. K. Jain, et al., 1998, 「Spring-in study of the aileron rib manufactured from advanced thermoplastic composite」, Composites Part A:Applied Science Manufacturing, Vol.29, No.8, pp.973–979, August.
[18]I. Baran, et al., 2016, “A Review on the Mechanical Modeling of Composite Manufacturing Processes”, Archives of Computational Methods in Engineering, Vol.24, No.2, pp.365–395, January.
[19]C. H. Wu and T. R. Tauchert, 2007, “Thermoelastic analysis of laminated plates. I - Symmetric specially orthotropic laminates”, Journal of Thermal Stresses, Vol.3, No.2, pp.247–259, April.
[20]R. F. Gibson, 2016, Principles of Composite Material Mechanics, CRC Press, Boca Raton.
[21]B. D. Agarwal, L. J. Broutman and K. Chandrashekhara, 2017, Analysis and Performance of Fiber Composites, Wiley, New York.
[22]S. Rahnama, R. Rafiee and M. Maleki, 2019, “The influence of hygrothermal environments on the stress concentration in unidirectional composite lamina”, Mechanics of Materials, Vol.129, pp.332–340, January.
[23]M. Gholami, et al., 2022, “Mechanical and failure analysis of thick composites under hygrothermal conditions by a novel coupled hygro-thermo-mechanical multiscale algorithm”, Composites Science and Technology, Vol.230, p.109773, November.
[24]S. H. Lo, et al., 2010, “Hygrothermal effects on multilayered composite plates using a refined higher order theory”, Composite Structures, Vol.92, No.3, pp.633–646, February.
[25]Q. Jin and W. Yao, 2017, “Hygrothermal analysis of laminated composite plates in terms of an improved C0-type global–local model”, Aerospace Science and Technology, Vol.63, pp.328–343, April.
[26]R. Rolfes, A. K. Noor and H. Sparr, 1998, 「Evaluation of transverse thermal stresses in composite plates based on first-order shear deformation theory」, Computer Methods in Applied Mechanics and Engineering, Vol.167, No.3–4, pp.355–368, December.
[27]K. Chandrashekhara and A. Bhimaraddi, 1997, “Thermal stress analysis of laminated doubly curved shells using a shear flexible finite element”, Computers & Structures, Vol.52, No.5, pp.1023–1030, September.
[28]M. Cinefra, et al., 2017, “Variable kinematic shell elements for composite laminates accounting for hygrothermal effects”, Journal of Thermal Stresses, Vol.40, No.12, pp.1523–1544, August.
[29]楊紹民,2014,複材殼狀零件畸變於金屬模具補償研究,碩士論文,大葉大學工業工程與管理學系。[30]吳宗泓,2019,複合材料L形樑成型模具之回彈補償參數研究,碩士論文,大葉大學工業工程與管理學系。[31]楊筑鈞,王正賢,林鴻佳,2022,“複合材料多曲面高溫變形行為與模具回彈補償”,中國機械工程學會第三十九屆全國學術研討會論文集,pp.D623~D628,苗栗,12月3日。
[32]K. Çinar and N. Ersoy, 2015, “Effect of fibre wrinkling to the spring-in behaviour of L-shaped composite materials”, Composites Part A:Applied Science and Manufacturing, Vol.69, pp.105–114, February.
[33]D3039/D3039M-08, 2008, “Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials”, Vol.15.03.
[34]J. S. Wang, 1997, “Analysis of Composite Rod Reinforced Laminates”, Ph.D. Dissertation, The University of Texas at Arlington.