[1]潘復生、張丁非,2006,鋁合金及應用,化學工業出版社。.
[2]Hardouin Duparc,Olivier, 2004, “Alfred Wilm and the beginnings of Duralumin” , Zeitschrift für Metallkunde, Vol. 101(5).
[3]Polmear, “I.J.Light Metals”, E.Arnold Publishers,London.
[4]黄魁元,1999,鋁及鋁合金在硝酸溶液中的腐蝕及緩蝕劑,化學清洗。
[5]Nonferrous Metal Products, 2000, “Annual Book of ASTM Standards”, Vol. 02, p. 634.
[6]JIS Handbook Non-Ferrous Materials and Metallurgy, Japanese Standards Association, pp. 1987-1988.
[7]陳佑昇,2000,ADC12壓鑄鋁合金共振疲勞壽命之可靠度分析,國立成功大學材料科學及工程研究所碩士論文。
[8]https://big5news.cnal.com/2009/07-01/124645810539320.shtml
[9]Not Available, 1999, “ASM Handbook-Alloy Phase Diagrams”, Asm Intl.
[10]馮艷、王日初、彭超群,2015,鎂合金與鋁合金陽極材料,中南大學出版社。
[11]Sho Baba、Akira Takashima, 1969, “Influence of Composition on the Twostep aging of Al-Mg-Si Alloys”, Trans JIM, Vol. 10, pp. 196-204.
[12]R.J.Livak, 1982, “Metallurgical Transactions A”, Vol. 13A, pp.1318-1321.
[13]D.W.Pashley、M..H.Jacobs、J.T.Vietz, 1967, “The Basic Processes Affecting Twostep Aging in an Al-Mg-Si Alloy”,Philosophical Magazine, Vol. 16, pp. 51-76.
[14]M.X.Guo、Y.D.Zhang、G.J.Li、S.B.Jin、G.Sha、J.S.Zhang、L.Z.Zhuang、E.J.Lavernia, 2019, “Solute clustering in Al-Mg-Si-Cu-Zn alloys during aging”, Journal of Alloys and Compounds, Vol. 774, pp. 347-363.
[15]Lucio F. Mondolfo, 1976, “Aluminum alloys: Structure and properties”, London, Butter Worths.
[16]林肇琦、孫貴經、胡維平等,1985,微量Mn對Al-Zn-Mg合金沉澱過程和顯微組織參數的影響[J],金屬學報,Vol.21,pp. 119-124.
[17]Ren W.P、Xiao C.B、Li.Q, et al, 2014, “Microstructure evolution of cobalt aluminide coating on nickel-based super-alloys during exposure at 1050℃ [J]”, Vacuum, Vol. 106, pp. 39-45.
[18]S.Sharifi Golru、M.M.Attar、B.Ramezanzadeh, 2015, “Effects of surface treatment of aluminum alloy 1050 on the adhesion and anticorrosion properties of the epoxy coating[J]”, Applied Surface Science, Vol. 345, pp. 360-368.
[19]He Lizi、Cao Y.H、Liu X.T, et al, 2013, “Influences of magnetic annealing on the grain growth in a cryoESCAPed 1050 aluminum alloy[J]”, Materials Characterization, Vol. 84, pp. 188-195.
[20]D.S.Park、S.W.Nam, 1995, “Effects of manganese dispersoid on the mechanical properties in Al-Zn-Mg alloys”, Journal of Materials Science[J], Vol. 30(5), pp. 1313-1320.
[21]Byeong、Ook Kong、Soo Woo Nam, 1996, “Investigation of growth mechanism and orientation relationship of Mn-dispersoid and Al-Zn-Mg-Mn alloy”, Materials Letters, Vol. 28, pp. 385-391.
[22]Adachih、Osamurak、Ochiais, et al, 2001, “Mechanical property of nanoscale precipitate hardening aluminum alloys[J] ”,ScriptaMaterialia, Vol. 44(8-9), pp. 1489-1492.
[23]日本輕金屬委員會,鋁合金之組織與性質,日本輕金屬學會,
pp. 278-289.
[24]Oddvin Reiso, 1984, “The Effect of Comosition and Homogenization Treatment on Extrudability of Al-Mg-Si Alloys”, Proceedings of Third International Aluminum Extrusion Technology Seminar, Atlanta, pp.31-45.
[25]Yu.I.Kukushin, 1982, “Methods of Raising the Extrudability of Aluminum Alloys by Optimization of Composition structure”, Light Metal Age, February, pp. 22-23.
[26]Lumley,Roger、O’Donnell,R.G、Gunasegaram,Dayalan、Givord, Michel, 2007, “Heat Treatment of High-Pressure Die Castings”, Metallurgical and Materials Transactions A.
[27]C. J. Peel、B. Evans、C. A. Baker、D. A. Bennett、P. J. Gregson, 1983, “The development and application of improved aluminum-lithium alloys”, Proceeding of the second International Aluminum-Lithium Conference, The Metallurgy Society of AIME, California USA, pp. 363-392.
[28]C. E. Deiter, 1986, “Mechanical Metallurgy, 3 rd ed”, McGraw-Hill, p.221.
[29]T. H. Courtney, 2000, “Mechanical Behavior of Materials, Second Edition”, McGraw-Hill HigherEducation, p. 196.
[30]R.E.Reed-Hill and R.Abbaschian, 1992, “ Physical Metallurgy Principles, Third Edition”, PWS-Kent Publishing Company.
[31]夏汶新,2012,Al-Zn-Mg-Cu 鋁合金析出硬化處理之研究,聖約翰科技大學自動化及機電整合研究所,碩士論文。[32]G.Thomas, 1961, “The Aging Characteristics of Aiuminium Alloys”, Jurnal of the Institute of Metals, Vol. 90, pp. 57-63.
[33]Yucle Birol, 2005, “The effect of sample preparation on the DSC analysis of 6061 alloy”, Journal of Materials Science 40, pp. 6357-6361.
[34]Samuel A.M、Gauthier L、Samuel F.H, 1996, “Microstructural aspects of the dissolutionand melting of Al2Cu phase in Al-Si alloys during solution heat treatment[J] ”, Metall Mater Trans A.
[35]Sokolowski J.H、Sun X.C, 1995, “The removal of copper-phase segregation and the subsequent improvement in mechanical properties of cast 319 aluminum alloys bytwo-stage solution heat treatment [J]”, Mater Processing Technol.
[36]Lasa L,Rodriguez-Ibabe J M, 2002, “Characterization of the dissolution of the Ibabe J M. Characterization of the dissolution of the Al2Cu phase in two Al-Si-Cu-Mg castings using calorimetry.”, Materials haracterization, pp.371-378.
[37]謝奇峰,2000,汽車防撞桿用剛強度鋁合金擠型材均質化處理與預熱溫度影響之研究,國立中央大學機械工程研究所碩士論文。
[38]Samuel F H,1998, “Incipient melting of Al5Mg8Si6Cu2 and Al2Cu intermetallics in unmodifiedand Strontium-modified Al-Si-Cu-Mg(319) alloys during solution heattreatment[J]”, Mater Sci, pp. 2283-2297.
[39]董傑、劉小濤,2003,高強鋁合金均勻化熱處理,中國有色金屬學報。
[40]Crowell N, 1995, “Shivkumar S.Solution treatment effects in cast Al-Si-Cu alloys”, AFS Trans, pp. 721-726.
[41]陸文化、李隆盛、黃良餘,1996,鑄造合金及其熔煉,北京機械工業出版社。
[42]I.J. Polmear, 1989, “Light Alloys-Metallurgy of the Light Metals, 2nd ed”, Edward Arnold.
[43]C.J. Peel、B. Evans、C.A. Baker、D.A. Bennett、P.J. Gregson, 1983, “The Development and Application of Improved Aluminum-Lithium Alloys”, Proceeding of the second International Aluminum-Lithium Conference, The Metallurgy Society of AIME, California USA, p. 363.
[44]鄭來蘇,1994,鑄造合金及其熔煉[M],西安西北工業大學出版社。
[45]王祝堂、田榮璋,2000,鋁合金及其加工手冊[M],長沙中南大學出版社。
[46]Ichikawariei、Ohashiteruo、Ikeda.Tetsuyyki, 1971, “Effects of cooling rate and super-cooling degree on solidified structure of Al-Mn, Al-Cr and Al-Zr alloys in rapid solidification[J]”, Trans JIM, Vol. 12, pp. 280-284.
[47]Parkds、Nam S.W, 1995, “Effects of manganese dispersoid on the mechanical properties in Al-Zn-Mg alloys [J]”, J.Mater.Sci, Vol.30(5), pp.1313-1320.
[48]Lim S.G、Jung Y.S、Kim S.S, 2000, “Characteristics of Rapidly solidified Al7075 -xwt.%Mn-alloys[J]”, Scripta Mater, Vol. 43(12), pp. 1077-1081.
[49]Mathyj、Scharfg、Becker.J, et al, 1990, “Development of high strength powder metallurgical aluminium alloys[J]” , Metall, Vol. 44, pp. 532-539.
[50]Kusuij、Fujiik、Yokoek, et al, 1996, “Development of super-high strength Al-Zn-Mg-Cu alloys[J]”, Mater.Sci.Forum, Vol. 217-222, pp. 1823-1828.
[51]J.Langerweger, 1980, “Aluminum Technology”, T.Sheppard,ed.,Inst Metals,London, pp. 216-222.
[52]陳克昌,1983,非鐵金屬材料的熱處理,材料科技,逢甲大學材料科學系,pp.71~78。