|
[1] P. Jonšta, Z. Jonšta, J. Sojka, L. ýížek, A. Hernas, Structural Characteristics of Nickel Super Alloy INCONEL 713LC after Heat Treatment, Journal of Achievements in Materials and Manufacturing Engineering 21, 2 (2007) 29-32. [2] N. Saunders, et al., Modeling the Material Properties and Behavior of Ni-based Superalloys. In: Superalloys 2004. Eds.: A.K. Green, et al., TMS, Warendale, 2004, 849. [3] B. Szczucka-Lasota, B. Formanek, L. Pajak, K. SzymaĔski, Oxidation of HVOF Sprayed Coatings with NiAl Intermetallic Matrix and Ceramic Phases, Proceedings of the 12th International Scientific Conference on Achievements in Mechanical and Materials Engineering, “AMME 2003”, Gliwice-Zakopane, 2003, 895-900. [4] B. Formanek, S. JóĨwiak, B. Szczucka-Lasota, A. DolataGrosz, Z. Bojar, Intermetallic Alloys with Oxide Particles and Technological Concept for High Loaded Materials, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, “AMME 2005”, Gliwice-Wisáa, 2005, 235-242. [5] T. Podrábský, M. Petrenec, K. Hrbáþek, V. Musil, Z. Jonšta, The Structure Changes of Cast Nickel Super Alloy at the Loading Processing International Conference „Trends in the Development of Machinery and Associated Technology“, TMT 2003, 253-256, Lloret de Mar, Barcelona, Spain. [6] Cantó, J. S., Winwood, S., Rhodes, K., & Birosca, S., A study of low cycle fatigue life and its correlation with microstructural parameters in IN713C nickel based superalloy, Materials Science and Engineering: A, 718, 19-32, (2018). [7] Kunz, L., Lukáš, P., Konečná, R., & Fintová, S., Casting defects and high temperature fatigue life of IN 713LC superalloy, nternational journal of fatigue, 41, 47-51, (2012). [8] Matysiak, H., Zagorska, M., Balkowiec, A., Adamczyk-Cieslak, B., Cygan, R., Cwajna, J., and Kurzydłowski, K. J., The microstructure degradation of the IN 713C nickel-based superalloy after the stress rupture tests, Journal of Materials Engineering and Performance, 23(9), 3305-3313, (2014). [9] S.A. Sajjadi, S.M. Zebarjad, Study of Fracture Mechanisms of Ni-Base Superalloy at Different temperatures, Journal of Achievements in Materials and Manufacturing Engineering 18 (2006) 227-230. [10] Z. Jonšta, Perspectives of Development of Technical Materials. Acta Met. Slovaca, Special Issue 1/2004, 10, 103- 111, ed. Longaureova, Slovakia, ISSN 1335-1532. [11] L. ýížek, J. Hubáþková, M. Greger, Z. Jonšta, S. Król, Z. Szulc, A. Galka, Structure Characteristics of Sandwich Steel Ti-Al Materials Made by Explosive Cladding, International Conference „Trends in the Development of Machinery and Associated Technology“, TMT (2005) 191-194, Antalya, Turkey. [12] G. Lojen, I. Anžel, A.C. Kneissl, A. Križman, E. Unterweger, B. Kosec, M. Bizjak, Microstructure of Rapid Solidified Cu-Al-Ni Shape Memory Alloy Ribbons, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, “AMME 2005”, Gliwice-Wisáa, 2005, 399-402. [13] N. Mitroviü, B. ûukiþ, B. Jordoviü, A. Mariþiü, B. Nedeljkoviü, Thermal and Microstructure Characterization of Metastable ZrTiCuNiAl Alloy Prepared by Copper-Mold Casting, International Conference, Trends in the Development of Machinery and Associated Technology, TMT 2005, 849-852, Antalya, Turkey [14] P. Jonšta , Z. Jonšta , J. Sojka , L. Čížek , A. Hernas , “Nickel super alloy INCONEL 713LC – structural characteristics after heat treatment”, journal of Achievements in Materials and Manufacturing Engineering, vol22,pp.7-14,(2007) [15]Chamanfar, A., Sarrat, L., Jahazi, M., Asadi, M., Weck, A. and Koul, A., "Microstructural characteristics of forged and heat treated inconel-718 disks", Materials & Design, Vol. 52, (2013), 791-800 [16] Cantó, J. S., Winwood, S., Rhodes, K., & Birosca, S., A study of low cycle fatigue life and its correlation with microstructural parameters in IN713C nickel based superalloy, Materials Science and Engineering: A, 718, 19-32, (2018). [17] Kunz, L., Lukáš, P., Konečná, R., & Fintová, S., Casting defects and high temperature fatigue life of IN 713LC superalloy, nternational journal of fatigue, 41, 47-51, (2012). [18] Matysiak, H., Zagorska, M., Balkowiec, A., Adamczyk-Cieslak, B., Cygan, R., Cwajna, J., and Kurzydłowski, K. J., The microstructure degradation of the IN 713C nickel-based superalloy after the stress rupture tests, Journal of Materials Engineering and Performance, 23(9), 3305-3313, (2014). [19] M. Azadi, M. Azadi, Evaluation of high-temperature creep behavior in Inconel-713C nickel-based superalloy considering effects of stress levels, Mater. Sci. Eng. A 689(2017) 298–305 [20] D. Hollander, D. Kulawinski, M. Thiele, C. Damm, S. Henkel, H. Biermann, U. Gampe, Investigation of isothermal and thermo-mechanical fatigue behavior of the nickel-base superalloy IN738LC using standardized and advanced test methods, Mater. Sci. Eng. A 670 (2016) 314–324 [21]Yazdani-Rad, R., Rahaei, M., Kazemzadeh, A. and Hasanzadeh, M., "Synthesis and characterization of nanocrystalline ni3al intermetallic during mechanical alloying process", International Journal of Engineering-Transactions C: Aspects, Vol. 25, No. 2, (2012), 89-96 [22]Ning, Y., Huang, S., Fu, M. and Dong, J., "Microstructural characterization, formation mechanism and fracture behavior of the needle δ phase in Fe–Ni–Cr type superalloys with high NB content", Materials Characterization, Vol. 109, (2015), 36-42 [23]Rahnavard, M. and Ghorabi, M.O.A., "Hot corrosion behavior of functional graded material thermal barrier coating (research note)", International Journal of Engineering-Transactions A: Basics, Vol. 30, No. 1, (2016), 101-109 [24]Principal, T. and Barnabas, K., "Optimization of minimum quantity liquid parameters in turning for the minimization of cutting zone temperature", International Journal of Engineering-Transactions C: Aspects, Vol. 25, No. 4, (2012),327-335 [25] C.T. Sims, W.C. Hagel (Eds.), The Superalloys, John Wiley & Sons, New York, USA, 1972. [26] C.T. Sims, N.S. Stoloff, W.C. Hagel (Eds.), Superalloys II, John Wiley & Sons, New York, USA, 1987 [27] S. Zhao, X. Xie, G.D. Smith, S.J. Patel, Gamma prime coarsening and age-hardeningbehaviors in a new nickel base superalloy, Mater. Lett. 58 (2004) 1784–1787. [28] H.Y. Li, X.P. Song, Y.L. Wang, G.L. Chen, Coarsening and age hardening behaviorsof γ' particles in GH742 during high temperature treatment, J. Iron Steel Res. 16 (2009) 81–86. [29] S. Tian, X. Ding, Z. Guo, J. Xie, Y. Xue, D. Shu, Damage and fracture mechanism of anickel-based single crystal superalloy during creep at moderate temperature, Mater.Sci. Eng. A 594 (2014) 7–16. [30] K. Fuwei, C. Fuyang, Z. Xuemin, Y. Hongyan, F. Yicheng, Age-hardening behavior in the spray formed Ni-based superalloy, Rare Met. Mater. Eng. 44 (2015) 2965–2970. [31] F.S. Qu, X.G. Liu, F. Xing, K.F. Zhang, High temperature tensile properties of laserbutt-welded plate of Inconel 718 superalloy with ultra-fine grains, Trans.Nonferrous Met. Soc. China 22 (2012) 2379–2388. [32] A. Mostafaei, Y. Behnamian, Y.L. Krimer, E.L. Stevens, J.L. Luo, M. Chmielus, Effect of solutionizing and aging on the microstructure and mechanical properties of powder bed binder jet printed nickel-based superalloy 625, Mater. Des. 111 (2016)482–491. [33] L. Whitmore, M.R. Ahmadi, M. Stockinger, E. Povoden-Karadeniz, E. Kozeschnik, H. Leitner, Structural investigation of thermally aged nickel-based superalloy 718Plus, Mater. Sci. Eng. A 594 (2014) 253–259. [34] L. Whitmore, H. Leitner, E. Povoden-Karadeniz, R. Radisb, M. Stockingerd, Transmission electron microscopy of single and double aged 718Plus superalloy, Mater. Sci. Eng. A 534 (2012) 413–423. [35]C. Joseph, C. Persson, M.H. Colliander, Influence of heat treatment on the microstructure and tensile properties of Ni-base superalloy Haynes 282, Mater. Sci. Eng. A 679 (2017) 520–530. [36] X. Jun, T. Sugui, Z. Xiaoming, Y. Xingfu, W. Wuxiang, Influence of heat treatmentregimes on microstructure and creep properties of FGH95 nickel base superalloy,Mater. Sci. Eng. A 538 (2012) 306–314. [37]Nguyen, L., Shi, R., Wang, Y. and De Graef, M., "Quantification of rafting of γ′ precipitates in ni-based superalloys", Acta Materialia, Vol. 103, (2016), 322-333 [38] ] C.M. Kuo, Y.T. Yang, H.Y. Bor, C.N. Wei, C.C. Tai, Aging effects on the microstructure and creep behavior of Inconel 718 superalloy, Mater. Sci. Eng. A 510–511(2009) 289–294. [39] M. Azadi, M. Iziy, A. Marbout, M. Azadi, M.H. Rizi, Investigation of heat treatment effect on microstructures and phases of Inconel-713C superalloy, Int. J. Eng. Trans. A: Basics 30 (10) (2017) 1538–1544. [40]Li, X., Wang, L., Dong, J. and Lou, L., "Effect of solidification condition and carbon content on the morphology of mc carbide in directionally solidified nickel-base superalloys", Journal of Materials Science & Technology, Vol. 30, No. 12, (2014), 1296-1300 [41] W. D. Callister Jr., D. G. Rethwisch, Materials Science and Engineering: An Introduction, John Wiley & Sons, New York, USA,2016 [42]H. Suzuki, The relation between the structure and mechanical properties of metals, Vol. 2, National Physical Laboratory, Symposium, No.15, 1963, P.524
|