|
[1]L. Cheah, Cars on a Diet: The Material and Energy Impacts of Passenger Vehicle Weight Reduction in the U.S. (Ph.D. Thesis, Massachusetts Institute of Technology, 2010). [2]P. Feraboli, E. Peitso, F. Deleo, T. Cleveland, P. B. Stickler, “Characterization of Prepreg-Based Discontinuous Carbon Fiber/Epoxy Systems”.Journal of Reinforced Plastics and Composites,Vol.28,pp.1191-1214,2009 [3]C. Qian, L.T. Harper, T.A. Turner and N.A. Warrior,“Notched behaviour of discontinuous carbon fibre composites: Comparison with quasi-isotropic non-crimp fabric”.Composites Part A: Applied Science and Manufacturing,Vol 42, Issue 3,pp.293-302,2011 [4]S. A. Hitchen, S. L. Ogin, P. A. Smith and C. Soutis,“The effect of fibre length on fracture toughness and notched strength of short carbon fibre/epoxy composites”.Composites,Vol 25, Issue 6,pp.407-413,1994 [5]L. Yuan-Qing, D. Sen-Sen, L. Li-Yuan, L. Fei, L. De-Bo, Z. Ze-Kun, X. Hong-Mei, H. Ning. and F. Shao-Yun, “Synergistic effects of short glass fiber/short carbon fiber hybrids on the mechanical properties of polyethersulfone composites”.Polymer Composites,Vol 40,.1725-1731,2019. [6]G. Florian, W. Malte, F. Bodo,B. Wolfgang and K. Schulte,“Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites”. Composites Part A: Applied Science and Manufacturing,Vol 36,pp.1525-1535,2005 [7]P. Feraboli, E. Peitso, T. Clevel and, P. B. Stickler, “Modulus Measurement for Prepreg-based Discontinuous Carbon Fiber/Epoxy Systems”.Journal of Composite Materials,Vol.43,pp.1947-1965,2009 [8]W. H. Alhazmi,A. A. Abd-Elhady,S. Mousa,M. Atta,A. Abu-Sinna,O. Bafakeeh,and H.E.M. Sallam, “Notch Tensile Strength of Carbon Fiber/Epoxy Composite Plate with a Center Hole under Static and Cyclic Loading”.Procedia Structural Integrity, Vol.17,pp292-299,2019 [9]https://www.compositesworld.com/articles/composite-spoilers-brake-airbus-for-landing(登入時間2021/5/18) [10]J.E. Lindhagen and L.A. Berglund,“Application of bridging-law concepts to short-fibre compositesPart 2: Notch sensitivity”.Composites Science and Technology,Vol. 60,pp.885-893 [11]https://www.compositesworld.com/articles/forged-composites-replace-complex-metal-parts(登入時間2021/5/18) [12]R. F. Gibson, Principles of Composite Material Mechanics, CRC Press, 2011 [13]M. Barczewski, D. Matykiewicz, J. Andrzejewski and K. Skorczewska, “Application of waste bulk moulded composite (BMC) as a filler for isotactic polypropylene composites”, Journal of Advanced Research, Vol. 7, pp. 373-380, 2016. [14]C. Kuhn,W. Kucinski,O. Taeger and T. Osswald,“Lightweight Design with Long Fiber‐Reinforced Polymers – Technological Challenges Due to the Effect of Fiber Matrix Separation”Plastics Engineering,Vol. 73,pp.48-49,2017 [15]Y. Wan and J. Takahashi,“Tensile and compressive properties of chopped carbon fiber tapes reinforced thermoplastics with different fiber lengths and molding pressures”.Composites Part A: Applied Science and Manufacturing,Vol.87,pp.271-281,2016 [16]Starbuck, J.M. “Energy Absorption in Chopped Carbon Fiber Compression Molded Composites”,2001 [17]F. Paolo, E. Peitso, F. Deleo, T. Cleveland, and P. B. Stickler,“Characterization of Prepreg-Based Discontinuous Carbon Fiber/Epoxy Systems.” Journal of Reinforced Plastics and Composites, vol. 28, no. 10, pp. 1191–1214,2009. [18]S. Sultana, A. Asadi, J. Colton and K. Kalaitzidou,“ Composites made from CF prepreg trim waste tapes using sheet molding compounds (SMC) technology: Challenges and potential ”,Composites Part A: Applied Science and Manufacturing,Vol.134,2020. [19]M. I. Lautenschläger, L. Mayer, J. Gebauer, K. A. Weidenmann, F. Henning and P. Elsner,“ Comparison of filler-dependent mechanical properties of jute fiber reinforced sheet and bulk molding compound ”,Composite Structures,Vol.203,pp.960-967,2018. [20]É. Léger, B. Landry, and G. LaPlante,“High flow compression molding for recycling discontinuous long fiber thermoplastic composites”, Journal of Composite Materials, Vol.54, pp. 3343–3350,2020. [21]G. Jiang, S.J. Pickering, E.H. Lester, T.A. Turner, K.H. Wong and N.A. Warrior,“ Characterisation of carbon fibres recycled from carbon fibre/epoxy resin composites using supercritical n-propanol”,Composites Science and Technology,Vol.69,pp.192-198,2009. [22]H. Tang, Z. Chen, G. Zhou, Y. Li, K. Avery, H. Guo, H. Kang, D. Zeng, and X. Su,“ Correlation between failure and local material property in chopped carbon fiber chip‐reinforced sheet molding compound composites under tensile load”,Polym. Compos,Vol.40,pp. E962-E974,2019. [23]M. Selezneva, and L. Lessard,“ Characterization of mechanical properties of randomly oriented strand thermoplastic composites ”,Journal of Composite Materials,Vol.50,pp.2833–2851,2016. [24]H. Sun, G. Guo, S. A. Memon, W. Xu, Q. Zhang, J.-H. Zhu and F. Xing,“ Recycling of carbon fibers from carbon fiber reinforced polymer using electrochemical method”,Composites Part A: Applied Science and Manufacturing,Vol.78,pp.10-17,2017. [25]S. Sanzida, “ Process-property relation of prepreg trim waste composites via sheet molding compound (SMC) ”, Georgia Institute of Technology,Ph.d.,2018. [26]M. Rani, P. Choudhary, V. Krishnan, S. Zafar, “A review on recycling and reuse methods for carbon fiber/glass fiber composites waste from wind turbine blades”,Composites Part B: Engineering,Vol. 215,2021. [27]R. Fukui, T. Odai, H. Zushi, I. Osawa, K. Uzawa and J. Takahashi “RECYCLE OF CARBON FIBER REINFORCED PLASTICSFOR AUTOMOTIVE APPLICATION” The Ninth Japan International SAMPE symposium,2005 [28]M. Knight and D. Curliss,Composite Materials,Academic Press,2003 [29]Chokri Cherif,Textile Materials for Lightweight Constructions,Springer, Berlin, Heidelberg,2016. [30]https://www.digitaltrends.com/cars/lamborghini-forged-carbon-fiber-manufacturing-process/(登入時間2021/5/18) [31]A. McPherson, “Structure, sport and style, new material advances with forged composite designs”, Composite Manufacturing ACMA, 2013 [32]C. H. Park, and W. I. Lee,“Compression molding in polymer matrix composites. Manufacturing Techniques for Polymer Matrix Composites (PMCs)”,pp. 47–94,2012. [33]http://apmf.kuas.edu.tw/laboratory/%E9%AB%98%E5%88%86%E5%AD%90%E5%8A%9F%E8%83%BD%E6%80%A7%E8%81%AF%E7%9B%9F-ployfilm/docs/page42-3.pdf(登入時間2021/6/16) [34]http://www.dx-kneader.com/wap/?content/165.html(登入時間2021/6/16) [35]A. D. Evans, C. C. Qian, T. A. Turner, L. T. Harper and N. A. Warrior,“Flow characteristics of carbon fibre moulding compounds”,Composites Part A: Applied Science and Manufacturing,Vol.90,pp.1-12,2016. [36]N. I. Baurova, and V. A. Zorin,“Current prepreg-formation technologies”,Polymer Science, Series D,Vol.10,pp.156-159,2017. [37]顧宜,複合材料,新文京開發出版股份有限公司,2017 [38]周森,複合材料,全威圖書,2009 [39]Y. S. Hung, “Repair of damaged composite laminate using bulk molding compound short-fiber reinforced polymer composites”National Kaoshung University,PhD,2018. [40]ASTM D3039, 2007, “Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials”, Annual Book of ASTM Standards. [41]ASTM D3410, 2003, “Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading”, Annual Book of ASTM Standards. [42]ASTM D790, 2003, “Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials”, Annual Book of ASTM Standards.”
|