1.Chang, Y.-Y., et al., Tribological and mechanical properties of multilayered TiVN/TiSiN coatings synthesized by cathodic arc evaporation. Surface and Coatings Technology, 2018. 350: p. 1071-1079.
2.Chang, Y.-Y., et al., Tribological and mechanical properties of AlCrBN hard coating deposited using cathodic arc evaporation. Surface and Coatings Technology, 2022. 432: p. 128097.
3.Musil, J., et al., Relationships between hardness, Young's modulus and elastic recovery in hard nanocomposite coatings. Surface and Coatings Technology, 2002. 154(2): p. 304-313.
4.Du, J.W., et al., Mechanical properties, thermal stability and oxidation resistance of TiN/CrN multilayer coatings. Vacuum, 2020. 179: p. 109468.
5.Liu, W., et al., High hardness and toughness potential TiN/TiSiN gradient nano-multilayer coating structure by finite element study. Ceramics International, 2024. 50(6): p. 9034-9046.
6.Mundotia, R., et al., Tuning bilayer period of AlN/CrN superlattice coatings deposited using cathodic arc technique for superior mechanical properties and thermal stability. Applied Surface Science Advances, 2022. 7: p. 100205.
7.Xie, J., et al., Oxidation resistance of TiSiN and AlCrN hard-coatings: Ab initio calculations and experiments. Applied Surface Science, 2023. 616: p. 156459.
8.張弘, 奈米多層氮化鈦釩/氮化鈦矽硬質薄膜之機械性質與切削加工性能. 碩士班, 2016.9.鍾承熹, 氮化鋁鉻硼硬質薄膜之機械性質與磨潤性能. 碩士班, 2021.10.Nohava, J., et al., Characterization of tribological behavior and wear mechanisms of novel oxynitride PVD coatings designed for applications at high temperatures. Tribology International, 2015. 81: p. 231-239.
11.Badisch, E., et al., Characterization of tribo-layers on self-lubricating plasma-assisted chemical-vapor-deposited TiN coatings. Thin Solid Films, 2004. 460(1): p. 125-132.
12.Xiao, B., et al., A study of oxidation behavior of AlTiN-and AlCrN-based multilayer coatings. Surface and Coatings Technology, 2018. 333: p. 229-237.
13.蔡宗宏, 陰極電弧蒸鍍多層氮化鋁鉻硼與氮化鋁鈦矽薄膜之熱穩定與抗氧化能力研究. 國立虎尾科技大學揭穴與電腦輔助工程系碩士班, 2023.14.Chen, L., et al., Improved thermal stability and oxidation resistance of Al–Ti–N coating by Si addition. Thin Solid Films, 2014. 556: p. 369-375.
15.Zhou, J., C. Hu, and L. Chen, Structure, mechanical properties and thermal stability of CrAlNbN/TiN multilayers. Vacuum, 2021. 188: p. 110182.
16.Lyo, I.-W., H.-S. Ahn, and D.-S. Lim, Microstructure and tribological properties of plasma-sprayed chromium oxide–molybdenum oxide composite coatings. Surface and Coatings Technology, 2003. 163-164: p. 413-421.
17.Xiao, B., et al., Effects of microstructure evolution on the oxidation behavior and high-temperature tribological properties of AlCrN/TiAlSiN multilayer coatings. Ceramics International, 2018. 44(18): p. 23150-23161.
18.趙良展, 奈米多層氮化鋁鈦/氮化鉻鈦矽硬質薄膜之機械性質與切削加工性能. 碩士班, 201919.Bobzin, K., C. Kalscheuer, and M. Tayyab, Effect of CrAIN coating properties on impact fatigue of tool steel. Surface and Coatings Technology, 2023. 471: p. 129869.
20.Mo, J.L., et al., Impact wear and abrasion resistance of CrN, AlCrN and AlTiN PVD coatings. Surface and Coatings Technology, 2013. 215: p. 170-177.
21.蔡孟蒓, 三元合金靶沉積氮化鋁鈦硼及氮化鋁鈦矽硬質薄膜之機械性質與磨潤性能. 碩士班, 2018.22.Sugishima, A., H. Kajioka, and Y. Makino, Phase transition of pseudobinary Cr–Al–N films deposited by magnetron sputtering method. Surface and Coatings Technology, 1997. 97(1): p. 590-594.
23.He, D., et al., Post-deposition annealing effects on microstructure, mechanical and tribological properties of AlCrN films. Journal of Materials Research and Technology, 2023. 25: p. 6843-6852.
24.PalDey, S. and S.C. Deevi, Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review. Materials Science and Engineering: A, 2003. 342(1): p. 58-79.
25.Chang, Y.-Y., Y.-J. Yang, and S.-Y. Weng, Effect of interlayer design on the mechanical properties of AlTiCrN and multilayered AlTiCrN/TiSiN hard coatings. Surface and Coatings Technology, 2020. 389: p. 125637.
26.Ou, Y.X., et al., Hard yet tough CrN/Si3N4 multilayer coatings deposited by the combined deep oscillation magnetron sputtering and pulsed dc magnetron sputtering. Applied Surface Science, 2020. 502: p. 144168.
27.Chen, W., et al., Microstructures and mechanical properties of AlCrN/TiSiN nanomultilayer coatings consisting of fcc single-phase solid solution. Applied Surface Science, 2020. 509: p. 145303.
28.Cui, C., et al., Microstructure, wear and corrosion behavior of high-entropy alloy coatings: The concentration of Mo element and the dual effect of σ-CrMo phase. Surface and Coatings Technology, 2023. 467: p. 129726.
29.Yoo, S.-E., et al., Effect of MoO3 on mechanical interfacial behavior and anti-oxidation of carbon fibers-reinforced composites. Journal of Industrial and Engineering Chemistry, 2015. 30: p. 29-32.
30.Chen, Y., et al., Improving high-temperature wear resistance of arc-evaporated AlCrN coatings by Mo alloying. Surface and Coatings Technology, 2023. 456: p. 129253.
31.Xu, Y.X., et al., Improving thermal stability of TiSiN nanocomposite coatings by multilayered epitaxial growth. Surface and Coatings Technology, 2017. 321: p. 180-185.
32.Zhang, R.F. and S. Veprek, Phase stabilities of self-organized nc-TiN/a-Si3N4 nanocomposites and of Ti1−xSixNy solid solutions studied by ab initio calculation and thermodynamic modeling. Thin Solid Films, 2008. 516(8): p. 2264-2275.
33.Flink, A., et al., The location and effects of Si in (Ti1-xSix)Ny thin films. Journal of Materials Research, 2009. 24(8): p. 2483-2498.
34.Lenz, B., et al., Application of CNN networks for an automatic determination of critical loads in scratch tests on a-C:H:W coatings. Surface and Coatings Technology, 2020. 393: p. 125764.
35.He, Q., et al., PVD coating strategies: Developing a combination of AlCrN and AlTiSiN for enhanced surface performance during threading of super duplex stainless steel. International Journal of Refractory Metals and Hard Materials, 2024. 121: p. 106670.
36.Yu, D., et al., Microstructure and properties of TiAlSiN coatings prepared by hybrid PVD technology. Thin Solid Films, 2009. 517(17): p. 4950-4955.
37.Alhafian, M.R., et al., Influence of Si addition on the phase structure and oxidation behavior of PVD AlTiN and AlTiCrN coatings using high-resolution characterization techniques. Journal of Alloys and Compounds, 2023. 968: p. 171800.
38.Li, P., et al., Microstructure, mechanical and thermal properties of TiAlN/CrAlN multilayer coatings. International Journal of Refractory Metals and Hard Materials, 2013. 40: p. 51-57.
39.Li, J., et al., Preparation and toughness optimization of (AlCrSiN/TiN)20/Ti multilayer multiscale bionic tool coatings. Applied Surface Science, 2023. 634: p. 157585.
40.Chang, Y.-Y., H.-Q. Feng, and C.-C. Chen, Effect of CrMoN addition on the thermal stability and cyclic impact resistance of TiVN coatings. Surface and Coatings Technology, 2023. 473: p. 129963.
41.Mayrhofer, P.H., H. Willmann, and C. Mitterer, Oxidation kinetics of sputtered Cr–N hard coatings. Surface and Coatings Technology, 2001. 146-147: p. 222-228.
42.Lin, J., W.D. Sproul, and J.J. Moore, Tribological behavior of thick CrN coatings deposited by modulated pulsed power magnetron sputtering. Surface and Coatings Technology, 2012. 206(8): p. 2474-2483.
43.Choi, E.Y., et al., Comparative studies on microstructure and mechanical properties of CrN, Cr–C–N and Cr–Mo–N coatings. Journal of Materials Processing Technology, 2007. 187-188: p. 566-570.
44.Chen, J., et al., Effects of multilayer structure on the high-speed dry-cutting performance of AlCrBN/AlCrN multilayer coatings. International Journal of Refractory Metals and Hard Materials, 2024. 121: p. 106672.
45.Xiao, B., et al., Mechanical, oxidation, and cutting properties of AlCrN/AlTiSiN nano-multilayer coatings. Surface and Coatings Technology, 2022. 433: p. 128094.
46.Liu, Y., et al., Influences of modulation period on structure and properties of AlTiSiN/AlCrSiN nanocomposite multilayer coatings. Vacuum, 2021. 193: p. 110516.
47.Hatic, D., et al., Use of machine learning for automatic Rockwell adhesion test classification based on descriptive and quantitative features. Surface and Coatings Technology, 2021. 427: p. 127762.
48.Heinke, W., et al., Evaluation of PVD nitride coatings, using impact, scratch and Rockwell-C adhesion tests. Thin Solid Films, 1995. 270(1): p. 431-438.
49.Falsafein, M., F. Ashrafizadeh, and A. Kheirandish, Influence of thickness on adhesion of nanostructured multilayer CrN/CrAlN coatings to stainless steel substrate. Surfaces and Interfaces, 2018. 13: p. 178-185.
50.Tang, J.-F., et al., Effect of bias voltages and interlayer design on microstructure, mechanical properties, and adhesion performance of AlCrSiN coatings deposited using HiPIMS. Surface and Coatings Technology, 2024. 480: p. 130618.
51.Tillmann, W., et al., Effect of the TiSiN interlayer properties on the adhesion and mechanical properties of multilayered TiSiCN thin films. Surface and Coatings Technology, 2024. 478: p. 130467.
52.Mei, F., et al., Greater improvement of carbon and boron co-doping on the mechanical properties, wear resistance and cutting performance of AlTiN coating than that of doping alone. Surface and Coatings Technology, 2021. 406: p. 126738.
53.Wu, Z., et al., Effects of the phase composition and grain size of Cr particles in Al–Cr targets on the microstructure and properties of AlCrN coatings. Ceramics International, 2022. 48(23, Part A): p. 35267-35279.
54.Geng, D., et al., An investigation on microstructure and milling performance of arc-evaporated TiSin/AlTiN film. Thin Solid Films, 2020. 709: p. 138243.
55.Akhter, R., et al., TiN versus TiSiN coatings in indentation, scratch and wear setting. Applied Surface Science, 2021. 563: p. 150356.
56.Oberle, T.J.J., Wear of metals. 1951. 3(6): p. 438-439.
57.Spurr, R. and T. Newcomb. The friction and wear of various materials sliding against unlubricated surfaces of different types and degrees of roughness. in Proc. Conf. on Lubrication and Wear, Inst. Mech. Eng., London. 1957.
58.De Hosson, J.T.M., et al., Electron Microscopy Characterization of Nanostructured Coatings. Nanostructured coatings, Springer-Verlag, New York, 2006, 2006.
59.Chen, H.-Y., C.-J. Tsai, and F.-H. Lu, The Young's modulus of chromium nitride films. Surface and Coatings Technology, 2004. 184(1): p. 69-73.
60.Wang, Q., et al., Fracture toughness and sliding properties of magnetron sputtered CrBC and CrBCN coatings. Applied Surface Science, 2018. 443: p. 635-643.
61.Hanifi, D., et al., The fracture toughness and tribological performance of NiAl/Al2O3-40 Wt.% TiO2 coating generated by air plasma spraying. Ceramics International, 2024. 50(1, Part B): p. 1533-1546.
62.Gryaznov, V.G., V.A. Solov'ev, and L.I. Trusov, The peculiarities of initial stages of deformation in nanocrystalline materials (NCMs). Scripta Metallurgica et Materialia, 1990. 24(8): p. 1529-1534.
63.Yamada, Y., et al., Effect of fracture properties and surface morphology on wear of DLC coatings at severe contact condition. Tribology International, 2022. 169: p. 107486.
64.Batista, J.C.A., C. Godoy, and A. Matthews, Impact testing of duplex and non-duplex (Ti,Al)N and Cr–N PVD coatings. Surface and Coatings Technology, 2003. 163-164: p. 353-361.
65.張弘, 奈米多層氮化鈦釩氮化鈦矽硬質薄膜之機械性質與切削加工性能. 2016.
66.Yuan, Z., et al., Damage evolution behavior of TiN/Ti multilayer coatings under high-speed impact conditions. Surface and Coatings Technology, 2021. 426: p. 127807.
67.Liu, Z.R., et al., Influence of Ni-addition on mechanical, tribological properties and oxidation resistance of AlCrSiN coatings. Ceramics International, 2019. 45(3): p. 3735-3742.
68.Lee, S.-H., et al., Investigation of short-term, high-temperature oxidation of AlCrN coating on WC substrate. Applied Surface Science, 2020. 505: p. 144587.
69.Jiang, Y., et al., Insight into the tribological performance and mechanisms of MoN-Ag/oil solid-liquid lubrication system based on catalytic effect. Surface and Coatings Technology, 2024. 480: p. 130612.
70.Gao, Y., et al., Design of cycle structure on microstructure, mechanical properties and tribology behavior of AlCrN/AlCrSiN coatings. Ceramics International, 2022. 48(9): p. 12255-12270.
71.Ahn, H.-S., I.-W. Lyo, and D.-S. Lim, Influence of molybdenum composition in chromium oxide-based coatings on their tribological behavior. Surface and Coatings Technology, 2000. 133-134: p. 351-361.
72.Öztürk, A., et al., Comparative tribological behaviors of TiN, CrN and MoNCu nanocomposite coatings. Tribology International, 2008. 41(1): p. 49-59.
73.Cheng, Y.H., et al., Mechanical and tribological properties of nanocomposite TiSiN coatings. Surface and Coatings Technology, 2010. 204(14): p. 2123-2129.
74.Cicek, H., et al., Structural and tribological properties of TiSiN films with different Si content. Thin Solid Films, 2023. 783: p. 140059.
75.Cassar, G., et al., Micro-abrasion wear testing of triode plasma diffusion and duplex treated Ti–6Al–4V alloy. Wear, 2012. 274-275: p. 377-387.
76.Musil, J., Hard and superhard nanocomposite coatings. Surface and Coatings Technology, 2000. 125(1): p. 322-330.
77.Mo, J.L., et al., Comparison of tribological behaviours of AlCrN and TiAlN coatings—Deposited by physical vapor deposition. Wear, 2007. 263(7): p. 1423-1429.
78.Endrino, J.L., et al., Oxidation tuning in AlCrN coatings. Surface and Coatings Technology, 2007. 201(8): p. 4505-4511.
79.Holmberg, K., H. Ronkainen, and A. Matthews, Tribology of thin coatings. Ceramics International, 2000. 26(7): p. 787-795.
80.Miletić, A., et al., Nanolayer CrAlN/TiSiN coating designed for tribological applications. Ceramics International, 2021. 47(2): p. 2022-2033.
81.Fox-Rabinovich, G.S., et al., Tribological adaptability of TiAlCrN PVD coatings under high performance dry machining conditions. Surface and Coatings Technology, 2005. 200(5): p. 1804-1813.
82.Mo, J.L. and M.H. Zhu, Tribological oxidation behaviour of PVD hard coatings. Tribology International, 2009. 42(11): p. 1758-1764.
83.Zhu, Y., et al., Wear failure mechanism of TiSiN coating at elevated temperatures. Applied Surface Science, 2019. 487: p. 349-355.
84.Fateh, N., et al., Influence of high-temperature oxide formation on the tribological behaviour of TiN and VN coatings. Wear, 2007. 262(9): p. 1152-1158.
85.Shum, P.W., et al., Mechanical and tribological properties of titanium–aluminium–nitride films deposited by reactive close-field unbalanced magnetron sputtering. Wear, 2004. 257(9): p. 1030-1040.
86.Lu, Y.H., et al., Effect of annealing temperature on microstructure, hardness and adhesion properties of TiSixNy superhard coatings. Applied Surface Science, 2011. 257(15): p. 6380-6386.
87.Mayrhofer, P.H., M. Stoiber, and C. Mitterer, Age hardening of PACVD TiBN thin films. Scripta Materialia, 2005. 53(2): p. 241-245.
88.Ljungcrantz, H., et al., Nanoindentation studies of single‐crystal (001)‐, (011)‐, and (111)‐oriented TiN layers on MgO. Journal of Applied Physics, 1996. 80(12): p. 6725-6733.
89.Peng, B., et al., High-temperature thermal stability and oxidation resistance of Cr and Ta co-alloyed Ti − Al − N coatings deposited by cathodic arc evaporation. Corrosion Science, 2020. 167: p. 108490.
90.Yan, C., et al., A Si-Nb co-alloyed AlCrN coating with good mechanical properties, excellent thermal stability and resistance to high temperature oxidation. Surface and Coatings Technology, 2024. 484: p. 130825.
91.Hemmati, A., J. Paiva, and S.C. Veldhuis, Thermal stability and machining performance of arc evaporated Ti1-xAlxN hard PVD coatings with x=0.5 – 0.73 ratios using an integrative approach. Materialia, 2021. 17: p. 101132.
92.Wang, S., et al., Oscillating local minimum energy site and its effect on the spinodal decomposition of TiAlN: A first-principles study. Vacuum, 2023. 212: p. 112069.