|
[1] A. Khambum, A. Buranawong, S. Chaiyakun, N. Witit-anun, Growth and Characterization of CrAlN Thin Film Deposited by Reactive Co-Sputtering, International Conference on Science and Technology 2015,RMUTT [2] H. N.Shah, R. Jayaganthan, D. Kaur, Influence of silicon content on the microstructure and hardness of CrN coatings deposited by reactive magnetron sputtering, Meterials Chemistry and Physics 121 (2010) 567-571 [3] J. Lin, B. Wang, Y. Ou, W. D. Sproul, I. Dahan, J. J. Moore, Structure and properties of CrSiN nonacomposite coatings deposited by hybrid modulated pulsed power and pulsed dc magnetron sputtering, Surface & Coating Technology 216 (2013) 251-258 [4] M. Stu ̈ber, U. Albers, H. Leiste, K. Seemann C. Ziebert, S. Ulrich, Magnetyon sputtering of hard Cr-Al-N-O thin films, Surface &Coating Technology 203 (2008) 661-665 [5] T. Suzuki, J. Inoue, H. Saito, M. Hirai, H. Suematsu, W. Jiang, K. Yatsui, Influence of oxygen on structure and hardness of Cr-N-O thin films prepared by pulsed laser deposition, Thin Solid Films 515 (2006) 2161-2166 [6] E. Almandoz, G. G. Fuentes, J. Ferna ́ndwz, J. Marti ́nez de Bujanda, R. J. Rodri ́guez, Fco. J. Pe ́rez-Trujillo, G. Alcala ́, A. Lousa, Y. Qin, Chemical and mechanical stability of air annealed cathodic arc evaporated CrAlON coatings, Surface &Coating Technology 351 (2018) 153-161 [7] T. K. Tsai, Y. H. Li, J. S. Fang, Spectral properties and thermal stability of CrN/CrON/Al2O3 spectrally selective coating, Thin Solid Films 615 (2016) 91-96 [8] A. A. Rjoub, L. Rebouta, P. Costa, N. F. Cunha, S. L. Mendez, N. P. Barradas, E. Alves, The effect of increasing Si content in the absorber layers (CrAlSiNx/CrAlSiOyNx) of solar selective absorbers upon their selectivity and thermal stability, Applied Surface Science 481 (2019) 1096-1102 [9] H.C. Barshilia, Groeth, characterization and performance evaluation of Ti/AlTiN/AlTiON/AlTiO high temperature spevtrally selective coatings for solar thermal power applications, Solar Energy Materials & Solar Cells 130 (2014) 322-330 [10] J. Z. Kong, T. J. Hou, Q. Z. Wang, L. Yin, F. Zhou, Z. F. Zhou, L. K. Y. Li, Influence of titanium or aluminum doping on the electrochemical properties of CrN coatings in artificial seawater, Surface & Coatings Technology 307 (2016) 118-124 [11] Y. Liu, Y. Dong, W. Zhao, G. Li, Microstructure and mechanical properties of (Al,Ti)(O,N) coatings prepared by reactive sputtering, International Journal of Refractory Metals & Hard Materials 25 (2007) 271-274 [12] R. Raab, C.M. Koller, S. Kolozsva ́ri, J. Ramm, P. H. Mayrhofer, Thermal stability of arc evaporated Al-Cr-O-N coatings, Surface & Coatings Technology 356 (2016) 64-71 [13] D. Gong, H. Liu, P. Zhang, X. Cheng, B. Yang, Y. Wang, J. Min, S. Chen, Z. Cui, K. Li, L. Hu, Thermal aging test of AlCrNO-based solar selective absorbing coatings prepared by cathodic arc plating, Solar Energy Meterials & Solar Cells 136 (2015) 167-171 [14] H. Najafi, A. Karimi, M. Morstein, Microstructure of Al95.5Cr2.5Si2(N1-xOx) thin films covering from nitrides to oxides, Surface & Coatings Technology 2015 (2011) 5199-5204 [15] G. Zhang, L. Wang, S.C. Wang, P. Yan, Q. Xue, Structure and mechanical properties of reactive sputtering CrSiN films, Applied Surface Science 255 (2009) 4425-4429 [16] D. Mercs, P. Briois, V. Demange, S. Lamy, C. Coddet, Influence of the addition of silicon on the structure and properties of chromium nitride coatings deposited by reactive magnetron sputtering assisted by RF plasmas, Surface & Coatings Technology 201 (2007) 6970-6976 [17] S. Tan, X. Zhang, X. Wu, F. Fang, J. Jiang, Effect of substrate bias and temperature on magnetron sputtered CrSiN films, Applied Surface Science 257 (2011) 1850-1853 [18] Y.C. Ee, Z. Chen, S.B. Law, S. Xu, Formation and characterization of Ti-Si-N-O barrier films, Thin Solid Films 504 (2006) 218-222 [19] 杜正恭,詹佑晨, 奈米硬質薄膜之發展、製備及檢測技術,科儀新知的三十三卷第三期100.12 p23-p32 [20] W. Siriprom, C. Chananonnawathorn, S. Kongsriprapan, K. Teanchai, Herman, M. Horprathum, Preparation and characterization of CrN thin film by DC reactive magnetron sputtering, Materials Today: Proceedings 5 (2018) 15224-15227 [21] J. Chen, C. Guo, J. Chen, J. He, Y. Ren, L. Hu, Microstructure, optical and electrical properties of CrAlN film as a novel material for high temperature solar selective absorber applications, Materials Letters 133 (2014) 71-74 [22] M. Bilokur, A.R. Gentle, M.D. Arnold, M.B. Cortie, G.B. Smith, High temperature optically-selective Ti1-xAlxN-based multilayer coating for concentrated solar thermal applications, Solar Energy Materials and Solar Cells 200 (2019) 109964 [23] Q. Cai, S. Li, J. Bai, H. Wang, Z. Cai, X. Wang, Corrosion resistance andtifouliing activities of silver-doped CrN Coatings deposited by magnetron sputtering, Surface &coating Technology 354 (2018) 194-202 [24] K. To ̈nshoff, B. Karpuschewski, A. Mohlfeld, T. Leyendecker, G. Erkens, H.G. Fuß, Performance of oxygen-rich TiAlON coating in dry cutting applications, Surface and Coatings Technology 108-109 (1998) 535-542 [25] R Luthier, F Le ́vy, TiAlON black decorative coatings deposited by magnetron sputtering, Vacuum colume 41 number7-9 (1990) p2205-2208 [26] M. Hirai, H. Saito, T. Suzuki, H. Suematsu, W. Jiang, K. Yatsui, Oxidation behavior of Cr-Al-N-O thin films prepared by pulsed laser deposition, Thin Solid Films 407 (2002) 122-125 [27] D. Zhu, F. Mao, S. Zhao, The influence of oxygen TiAlOxNy on the optical properties of colored solar-absorbing coatings, Solar Energy Materials & Solar Cells 98 (2012) 179-184 [28] L. Rebouta, A.Pita ̃es, M. Andritschky, P. Capela, M.F. Cerqueira, A. Matilainen, K. Pischow, Optical characterization of TiAlN/TiAlON/SiO2 absorber for solar selective applications, Surface & Coatings Technology 211 (2012) 41-44 [29] C.Zou, L. Huang, J. Wang, S. Xue, Effects of antireflection layers on the optical and thermal stability properties of a spectrally selective CrAlN-CrAlON based tandem absorber, Solar Energy Materials & Solar Cells 137 (2015) 243-252 [30] C. Zou, W. Xie, L. Shao, Functional multi-layer solar spectral selective absorbing coatings of AlCrSiN/AlCrSiON/AlCrO for high temperature applications, Solar Energy Materials & Solar Cells 153 (2016) 9-17 [31] D. Jiles, Introduction properties of materials, Advanced Materials 7(4) (1994) 423 – 424. [32] B. E. Sernelious, K. F. Berggren, Z. C. Jin, I. Hambreg, C.G. Granqvist, Band - gap tailoring of ZnO by means of heavy Al doping, Physical Review B. 37(17) (1998) 10244-10248 [33] N. Ahmed, A. Majid, M.A. Khan, M.Rashid, Z.A. Umar, M.A. Baig, Synthesis and characterization of Zn/ZnO microspheres on in dented sites of silicon substrate, Materials Science-Poland 36(3), (2018) 501-508 [34] B. Liu, L. Huo, R. Si, Jian Liu, Jun Zhang, A General Method for Constructing Two-Dimensional Layered Mesoporous Mono- and Binary-Transition-Metal Nitride/Graphene as an Ultra-Efficient Support to Enhance Its Catalytic Activity and Durability for Electrocatalytic Application, ACS Appl. Mater. Interfaces(2016), 8, 18770−18787 [35] Z. Hui, X. Tang, R. Wei, L.Hu, J. Yang, H. Luo, J. Dai, W. Song, X. Liu, X. Zhu, Y. Sun, Facile chemical solution deposition of nanocrystalline CrN thin films with low magnetoresistance, RSC Adv.(2014) 4 12568–12571 [36] K. Ibrahim, M. M. Rahman, X. L. Zhao, J. P. Veder, Z. F. Zhou, E. Mohammadpour, R. H. Majeed, A. N. Nikoloski, Z. T. Jiang, Annealing effects on microstructural, optical, and mechanical properties of sputtered CrN thin film coatings: Experimental studies and finite element modeling, Journal of Alloys snd Compounds 750 (2018) 451-464 [37] K. Ibrahim, M. M. Rahman, H. Taha, E. Mohammadpour, Z. F. Zhou, C. Y. Yin, A. Nikoloski, Z. T. Jiang, Structural, morphological, and optical characterizations of Mo, CrN and Mo:CrN sputtered coatings for potential solar selective applications, Applied Surface Science 440 (2018) 1001-1010 [38] L. Banko, S. Ries, D. Grochla, M. Arghavani, S. Salomon, J. Pfetzing Micklich, A. Kostka, D. Rogalla, J. Schulze, P. Awakowicz, Alfred Ludwig, Effects of the ion to groth flux ratio on the constitution and mechanical properties of Cr-Al-N thin films, ACS Combinatorial Science 2019 [39] A. Supgishima, H. Kajioka, Y. Makino, Phase transition of pseudobinary Cr-Al-N films deposited by magnetron sputtering method, Surface and Coatings Technology 97 (1997) 590-594 [40] D. Grochla, A. Siegel, S. Hamann, P. J. S. Buenconsejo, M. Kieschnick, H. Brunken, D. Ko ̈nig, A. Ludwig, Time-and space-resolved high-throughput characterization of stresses during sputtering and thermal processing of Al-Cr-N thin films, Journal of Physics D: Applied Physics 46 (2013) 084011 [41] G. Cabrera, F. Torres, J.C. Caicedo, W. Aperador, C. Amaya, P. Prieto, Improvemant of electrochemical surface properties in steel substrates using a nanostructured CrN/AlN multilayer coating, ASM International (2010) 1059-9495 [42] H. Chaurasia, S. K. Tripathi, K. Bilgaiyah, A. Pandey, K. Mukhopadhyay, K. Agarwal, N. Eswara Prasad, Preparation and properties of AlN (aluminum nitride) powder/thin films by single source precursor,Royal Society of Chemistry and the Centre National de la Recherche Scientifique 2019 [43] J. A. P. Taborda, J.C. Caicedo, M. Grisales, W. Saldarriaga, H. Riascos, Deposition pressure effect on chemical, morphological and optical properties of binary Al-nitrides, Optics & Laser Technology 69 (2015) 92-103 [44] M.Alizadeh, H. Mehdipour, V. Ganesh, A. N. Ameera, B. T. Goh, A. Shuhaimi, S. A. Rahman, Plasma-assisted hot filament chemical vapor deposition of AlN thin films on ZnO buffer layer : toward highly c-axis-oriented, uniform, insulative films, Applied Physics A Materials Science & Processing (2014) [45] B. Subramanian, V. Swaminathan, M. Jayachandran, Micro-structural and properties of reactive magnetron sputtered Aluminum Nitride (AlN) nanostructured films, Current Applied Physics 11 (2011) 43-49 [46] M. Hirai, Y. Ueno, T. Suzuki, W. Jiang, C. Grigoriu K. Yatsui, Characteristics of (Cr1-x,Alx)N films prepared by pulsed laser deposition, The Japan Society of Applied Physics 40 (2001) 1056-1060 [47] S. Khan, M. Shahid, A. Mahmood, A. Shah, I. Ahmed, M. Mehmood, U. Aziz, Q. Raza, M. Alam, Texture of the nano-srystalline AlN thin films and the growth conditions in DC magnetron sputtering, Progress in Natural Science : Materials International 25 (2015) 282-290 [48] F. Hajakbari, M. M. Larijani, M. Ghoranneviss, M. Aslaninejad, A. Hojabri, Optical properties of amorphous AlN thin films on glass and silicon substrates grown by single ion beam sputtering, Japanses Journal of Applied Physics 49 (2010) 095802 [49] M. Hirai, Y. Ueno, T. Suzuki, W. Jiang, C. Grigoriu, K. Yatsui, Characteristics of CrN films prepared by pulsed laser deposition, The Japan Society of Applied Physics 40 (2001) 1052-1055 [50] B. Guo, M. Chi, X.G. Sun, S. Dai, Mesoporous carbon-Cr2O3 composite as an anode material for lithium ion batteries, Journal of Power Sources 205 (2012) 495-499 [51] B. Chen, Y. Wang, C. Li, L. Fu, X. Liu, Y. Zhu, L.Zhang, Y. Wu, A Cr2O3/MWCNTs composite as a superior electrode material for supercapacitor, RSC Adv (2017) 7 25019-15024
|