|
1.Pawel Kurowski, "Finite Element Analysis for Design Engineers," in Finite Element Analysis for Design Engineers, SAE, 2017, pp. i-xiii. 2.Schwarz, B.J. and Richardson, M.H., 1999. Experimental modal analysis. CSI Reliability week, 35(1), pp.1-12. 3.Zaghbani, Imed, and Victor Songmene. "Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis." International Journal of Machine Tools and Manufacture 49.12-13 (2009): 947-957. 4.Besharati S, Dabbagh V, Amini H. Multi-objective selection and structural optimization of the gantry in a gantry machine tool for improving static, dynamic, and weight and cost performance. Concurrent Engineering. 2016;24(1):83-93. doi:10.1177/1063293X15597047. 5.Tunc, Lutfi Taner, Yaser Mohammadi, and Erhan Budak. "Destabilizing effect of low frequency modes on process damped stability of multi-mode milling systems." Mechanical Systems and Signal Processing 111 (2018): 423-441. 6.Chan, TC., Lin, HH. & Reddy, S.V.V.S. Prediction model of machining surface roughness for five-axis machine tool based on machine-tool structure performance. Int J Adv Manuf Technol 120, 237–249 (2022). https://doi.org/10.1007/s00170-021-08634-7. 7.Chan, T.C., Chang, K.C., Chang, S.L. and Chiang, P.H., 2022. Simulation, modeling, and experimental verification of moving column precision grinding machine. Journal of the Chinese Institute of Engineers, 45(1), pp.54-64. 8.Hong, C.C., Cheng-Long Chang, and Chien-Yu Lin. "Static structural analysis of great five-axis turning–milling complex CNC machine." Engineering Science and Technology, an International Journal 19, no. 4 (2016): 1971-1984. 9.Chen, D., Fan, J., & Zhang, F. (2012). Dynamic and static characteristics of a hydrostatic spindle for machine tools. Journal of Manufacturing Systems, 31(1), 26-33. 10.Z. Wu, C. Xu, J. Zhang, D. Yu and P. Feng, "Modal and Harmonic Response Analysis and Evaluation of Machine Tools," 2010 International Conference on Digital Manufacturing & Automation, 2010, pp. 929-933, doi: 10.1109/ICDMA.2010.155. 11.Lu, X. Chen, Y.; Sheng, X. Analysis of the Influence of Structural Parameters on the Modes of a Gantry Machine Tool Crossbeam Based on Analytical Method. Appl. Sci. 2022, 12, 11083. https://doi.org/10.3390/app122111083. 12.Chan, T. C., & Yang, J. S. (2020, August). Optimized Design and Performance Study of High Speed Five-Axis Machine Tools. In International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Vol. 83952, p. V006T06A011). American Society of Mechanical Engineers. 13.Gao, D. Q., Zhang, F., Mao, Z. Y., Lin, H., & Yi, J. M. (2011). Finite Element Analysis and Structure Optimization of Machine Tool Worktable. In Applied Mechanics and Materials (Vol. 80, pp. 985-989). Trans Tech Publications Ltd. 14.Huo, D., Cheng, K. & Wardle, F. Design of a five-axis ultra-precision micro-milling machine—Ultra Mill. Part 2: integrated dynamic modelling, design optimization and analysis. Int J Adv Manuf Technol 47, 879–890 (2010). https://doi.org/10.1007/s00170-009-2129-1. 15.Li, Li, C., Li, P. et al. Structural Design and Optimization of the Crossbeam of a Computer Numerical Controlled Milling-Machine Tool Using Sensitivity Theory and NSGA-II Algorithm. Int. J. Precis. Eng. Manuf. 22, 287–300 (2021). https://doi.org/10.1007/s12541-020-00435-4. 16.Deng, C., Yin, G., Fang, H., & Meng, Z. (2015). Dynamic characteristics optimization for a whole vertical machining center based on the configuration of joint stiffness. The International Journal of Advanced Manufacturing Technology, 76(5), 1225-1242 17.Good way CNC official web page (https://www.goodwaycnc.com/). 18. ANSYS learning, (https://www.mechead.com/mesh-methods-and-element-types-in-ansys-workbench).
|