|
[1]B. Gao, W. L. Woo, Y. He, and G. Y. Tian, “Unsupervised sparse pattern diagnostic of defects with inductive thermography imaging system,” IEEE Transactions on Industrial Informatics, 12(1), pp. 371-383, 2015. [2]V. Cnudde and M. N. Boone, “High-resolution X-ray computed tomography in geosciences: A review of the current technology and applications,” Earth-Science Reviews, 123, pp.1-17, 2013. [3]G. Dobie, R. Summan, S. G. Pierce, W. Galbraith, and G. Hayward, “A noncontact ultrasonic platform for structural inspection,” IEEE Sensors Journal, 11(10), pp. 2458-2468, 2011. [4]N. Ulapane, K. Thiyagarajan, J. V. Miro and S. Kodagoda. “Surface Representation of Pulsed Eddy Current Sensor Signals for Improved Ferromagnetic Material Thickness Quantification,” IEEE Sensors Journal, 21(4), pp. 5413-5422, 2021. [5]Y. Yu, D. Zhang, C. Lai and G. Tian. “Quantitative Approach for thickness and conductivity measurement of monolayer coating by dual-frequency eddy current technique,” IEEE Transactions on Instrumentation and Measurement, 66(7), pp.1874-1882, 2017. [6]D. J. Pasadas, P. Baskaran, H. G. Ramos, and A. L. Ribeiro, “Detection and classification of defects using ECT and Multi-Level SVM model,” IEEE Sensors Journal, 20(5), pp. 2329-2338, 2020. [7]Z. Zhang, M. Fan, B. Cao and D. Wen. “Enhancement of Thickness Measurement in Eddy Current Testing Using a Log-Log Method,” Journal of Nondestructive Evaluation, 40(2), pp.1-10, 2021. [8]Y. Shin, D. Choi, Y. Kim and S. Lee. “Signal characteristics of differential pulsed eddy current sensors in the evaluation of plate thickness,” NDT & E International, 42(3), pp. 215-221, 2009. [9]M. Lu M, X. Meng, R. Huang, L. Chen, A. Peyton, W. Yin and Z. Qu. “Thickness measurement of circular metallic film using single-frequency eddy current sensor,” NDT & E International, 119, 102420, 2021. [10]W. Y. Cheng. “Thickness Measurement of Metal Plates Using Swept-Frequency Eddy Current Testing and Impedance Normalization,” IEEE Sensors Journal, 17(14), pp. 4558-4569, 2017. [11]R. Huang, M. Lu, A. Peyton and W. Yin. “Thickness Measurement of Metallic Plates with Finite Planar Dimension Using Eddy Current Method,” IEEE Transactions on Instrumentation and Measurement, 69(10), pp. 8424-8431, 2020. [12]J. Kral, R. Smid, H. Ramos and A. Ribeiro. “The Lift-off Effect in Eddy Currents on Thickness Modeling and Measurement,” IEEE Transactions on Instrumentation and Measurement, 67(7), pp. 2043-2049, 2013. [13]D. Wu, Z. Liu, X. Wang, & L. Su, “Composite magnetic flux leakage detection method for pipelines using alternating magnetic field excitation,” NDT & E International, 91, pp.148-155, 2017. [14]C. Ye, Z. Su, A. Rosell, L. Udpa, T. Capobianco and A. Tamburrino, “A decay time approach for linear measurement of electrical conductivity,” NDT & E International, 102, pp. 169-174, 2019. [15]M. R. Nabavi, & S. N. Nihtianov, “Design strategies for eddy-current displacement sensor systems: Review and recommendations,” IEEE Sensors Journal, 12(12), 3346-3355, 2012. [16]A. A. Rodríguez, & A. Valli, “Eddy Current Approximation of Maxwell Equations: Theory, Algorithms and Applications” (Vol. 4). Springer Science & Business Media, 2010. [17]A. Sophian, G. Y. Tian, D. Taylor & J.Rudlin, “Electromagnetic and eddy current NDT: a review,” Insight, 43(5), 302-306, 2001. [18]J. García-Martín, J. Gómez-Gil, & E. Vázquez-Sánchez, “Non-destructive techniques based on eddy current testing,” Sensors, 11(3), 2525-2565,2011. [19]A. Sophian, G. Tian, & M. Fan, “Pulsed eddy current non-destructive testing and evaluation: A review,” Chinese Journal of Mechanical Engineering, 30(3), 500-514, 2017. [20]S. Haugland, “Fundamental analysis of the remote-field eddy-current effect,” IEEE Transactions on Magnetics, 32(4), 3195-3211, 1996. [21]M. Pattabiraman, R. Nagendran, & M. P. Janawadkar, “Rapid flaw depth estimation from SQUID-based eddy current nondestructive evaluation,” NDT & E International, 40(4), 289-293, 2007. [22]H. Huang, N. Sakurai, T. Takagi, and T. Uchimoto, “Design of an eddy-current array probe for crack sizing in steam generator tubes,” NDT & E International, 36(7), 515-522, 2003. [23]X. Jian, S. Dixon, K. T. V. Grattan, & R. S. Edwards, “A model for pulsed Rayleigh wave and optimal EMAT design,” Sensors and Actuators A: Physical, 128(2), 296-304, 2006. [24]R. B. Thompson, “Physical principles of measurements with EMAT transducers,” Physical Acoustics, 19, 157-200, 1990. [25]I. Miccoli, F. Edler, H. Pfnür, and C. Tegenkamp, “The 100th anniversary of the four-point probe technique: the role of probe geometries in isotropic and anisotropic systems,” Journal of Physics: Condensed Matter, 27(22), 223201, 2015. [26]A. H. Robbins, & W. C. Miller, “Circuit analysis: Theory and practice,” Cengage Learning, 2012. [27]N. Ida, “Numerical modeling for electromagnetic non-destructive evaluation”, vol. 1, Springer Science & Business Media, 1994. [28]G. R. Hugo, & S. K. Burke, “Impedance changes in a coil due to a nearby small conducting sphere,” Journal of Physics D: Applied Physics, 21(1), 33, 1988. [29]B. V. Rao, “Electronic Circuit Analysis,” Pearson Education India, 2012. [30]M. Parker, A. Pokatilov, T. Kübarsepp, O. Märtens, and A. Kolyshkin, “Investigation of planar coil for eddy current conductivity measurements in wide frequency range,” In 19th IMEKO TC-4 Symposium on Measurements of Electrical Quantities, 18 - 19 July 2013, Barcelona, Spain. [31]J. Isla, & F. Cegla, “Optimization of the bias magnetic field of shear wave EMATs,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 63(8), 1148-1160, 2016. [32]A. G. Betjemann, H. V. Bohm, D. J. Meredith, & E. R. Dobbs, “RF-ultrasonic wave generation in metals,” Physics Letters A, 25(10), 753-754, 1967. [33]A. W. Leissa, “Vibration of plates,” Scientific and Technical Information Division, National Aeronautics and Space Administration, (Vol. 160), 1969. [34] H. Zhou, K. W.Wong, X. S. Xu, and A. Y. T. Leung, “Natural vibration of circular and annular thin plates by Hamiltonian approach,” Journal of Sound and Vibration, 330(5), pp. 1005-1017, 2011. [35]E. Oran Brigham, The fast Fourier transform and its applications, Prentice-Hall, 1988. [36]J. H. Scofield, “Frequency‐domain description of a lock‐in amplifier,” American Journal of Physics, 62(2), pp. 129-133, 1994. [37]C. H. Dinh , J. T. Jeng, G. W. Huang, J. Y. Chen, Y. S. Chiang, V. D. Doan, & T. T. Pham, “Real-time thickness measurement using resonant eddy-current sensor.” IEEE Transactions on Instrumentation and Measurement, 70, 1-9, 2021. [38]I. Miccoli, F. Edler, H. Pfnür, wnkamp, “The 100th anniversary of the four-point probe technique: the role of probe geometries in isotropic and anisotropic systems,” Journal of Physics: Condensed Matter, 27(22), 223201, 2015. [39]E. Frank, “Electric potential produced by two point current sources in a homogeneous conducting sphere,” Journal of Applied Physics, 23(11) 1225-1228, 1952. [40]N. Bowler & Y. Huang, “Model-based characterization of homogeneous metal plates by four-point alternating current potential drop measurements,” IEEE transactions on magnetics, 41(6) 2102-2110, 2005. [41]Ø. Persvik, & Z. Zhang, “Four-point transient potential drop measurements on metal plates,” Measurement Science and Technology, 31(2), 024006, 2019. [42]V. D. Doan, J. T. Jeng, H. T. Nguyen, C. H. Dinh, D. V. Dao, & T. T. Pham, “Magnetization measurement system with giant magnetoresistance zero-field detector,” IEEE Transactions on Magnetics, 58(2), 1-5, 2021. [43]https://www.tankong.com/products.php [44]A. Carlosena, A. J. Alfonso, F. Arizti, and A. Martinez-de-Guerenu, “Sensing in coin discriminators,” IEEE Sensors Applications Symposium, IEEE, pp. 1-6, 2007. [45]M. Suzuki, “Development of a simple and non-destructive examination for counterfeit coins using acoustic characteristics,” Forensic Science International, 177(1) e5-e8, 2008.
|