|
[1] M. Dehghani, A. Amadeh, and S. A. A. Akbari Mousavi, "Investigations on the effects of friction stir welding parameters on intermetallic and defect formation in joining aluminum alloy to mild steel," Materials & Design, vol. 49, pp. 433-441, 2013. [2] C. Leitao, E. Arruti, E. Aldanondo, and D. M. Rodrigues, "Aluminium-steel lap joining by multipass friction stir welding," Materials & Design, vol. 106, pp. 153-160, 2016. [3] H. Uzun, C. Dalle Donne, A. Argagnotto, T. Ghidini, and C. Gambaro, "Friction stir welding of dissimilar Al 6013-T4 To X5CrNi18-10 stainless steel," Materials & Design, vol. 26, pp. 41-46, 2005. [4] R. Palanivel, P. K. Mathews, N. Murugan, and I. Dinaharan, "Effect of tool rotational speed and pin profile on microstructure and tensile strength of dissimilar friction stir welded AA5083-H111 and AA6351-T6 aluminum alloys," Materials & Design, vol. 40, pp. 7-16, 2012. [5] S. B. Jamaludin, M. Z. Abd Latif, M. N. Mazlee, and K. Hussin, "Joining Dissimilar Metals between Steel and Aluminum by TIG Welding," Materials Science Forum, vol. 819, pp. 45-49, 2015. [6] F. Liu, D. Ren, and L. Liu, "Effect of Al foils interlayer on microstructures and mechanical properties of Mg–Al butt joints welded by gas tungsten arc welding filling with Zn filler metal," Materials & Design, vol. 46, pp. 419- 425, 2013. [7] J. Niagaj, "Use of A-TIG method for welding of titanium, nickel, their alloys and austenitic steels," Welding international, vol. 20, pp. 516-520, 2006. [8] L. Liming, W. Shengxi, and Z. Limin, "Study on the dissimilar magnesium alloy and copper lap joint by TIG welding," Materials Science and Engineering: A, vol. 476, pp. 206-209, 2008. [9] Y. Kusuda, "Honda develops robotized FSW technology to weld steel and aluminum and applied it to a mass-production vehicle," Industrial Robot: An International Journal, vol. 40, pp. 208-212, 2013. [10] M. Haghshenas, A. Abdel-Gwad, A. M. Omran, B. Gökçe, S. Sahraeinejad, and A. P. Gerlich, "Friction stir weld assisted diffusion bonding of 5754 aluminum alloy to coated high strength steels," Materials & Design, vol. 55, pp. 442-449, 2014. [11] K.-J. Lee, S. Kumai, N. Kawamura, N. Ishikawa, and K. Furuya, "Growth Manner of Intermetallic Compounds at the Weld Interface of Steel/Aluminum Alloy Lap Joint Fabricated by a Defocused Laser Beam," Materials Transactions, vol. 48, pp. 1396-1405, 2007. [12] H. Ma, G. Qin, L. Wang, X. Meng, and L. Chen, "Effects of preheat treatment on microstructure evolution and properties of brazed-fusion welded joint of aluminum alloy to steel," Materials & Design, vol. 90, pp. 330-339, 2016. [13] M. Kang and C. Kim, "Joining Al 5052 alloy to aluminized steel sheet using cold metal transfer process," Materials & Design, vol. 81, pp. 95-103, 2015. [14] W.-B. Lee, M. Schmuecker, U. A. Mercardo, G. Biallas, and S.-B. Jung, "Interfacial reaction in steel–aluminum joints made by friction stir welding," Scripta Materialia, vol. 55, pp. 355-358, 2006. [15] J. Huang, J. He, X. Yu, C. Li, and D. Fan, "The study of mechanical strength for fusion-brazed butt joint between aluminum alloy and galvanized steel by arc-assisted laser welding," Journal of Manufacturing Processes, vol. 25, pp. 126-133, 2017. [16] A. Das, M. Shome, S. F. Goecke, and A. De, "Numerical modelling of gas metal arc joining of aluminium alloy and galvanised steels in lap joint configuration," Science and Technology of Welding and Joining, vol. 21, pp. 303-309, 2016. [17] A. Das, M. Shome, C. R. Das, S.-F. Goecke, and A. De, "Joining of galvannealed steel and aluminium alloy using controlled short circuiting gas metal arc welding process," Science and Technology of Welding and Joining, vol. 20, pp. 402-408, 2015. [18] H. Bang, H. Bang, G. Jeon, I. Oh, and C. Ro, "Gas tungsten arc welding assisted hybrid friction stir welding of dissimilar materials Al6061-T6 aluminum alloy and STS304 stainless steel," Materials & Design, vol. 37, pp. 48-55, 2012. [19] F. Haddadi, "Rapid intermetallic growth under high strain rate deformation during high power ultrasonic spot welding of aluminium to steel," Materials & Design, vol. 66, pp. 459-472, 2015. [20] R. Qiu, H. Shi, H. Yu, and K. Zhang, "Joining phenomena of stainless steel/aluminium alloy joint welded by thermal compensation resistance spot welding," International Journal of Materials and Product Technology, vol. 49, pp. 285-293, 2014. [21] S. Kobayashi and T. Yakou, "Control of intermetallic compound layers at interface between steel and aluminum by diffusion-treatment," Materials science and engineering: A, vol. 338, pp. 44-53, 2002. [22] D. Zhou, S. Xu, L. Zhang, Y. Peng, and J. Liu, "Microstructure, mechanical properties, and electronic simulations of steel/aluminum alloy joint during deep penetration laser welding," The International Journal of Advanced Manufacturing Technology, vol. 89, pp. 377-387, 2016. [23] G. Sorger, H. Wang, P. Vilaça, and T. G. Santos, "FSW of aluminum AA5754 to steel DX54 with innovative overlap joint," Welding in the World, vol. 61, pp. 257-268, 2017. [24] X. Liu, S. Lan, and J. Ni, "Analysis of process parameters effects on friction stir welding of dissimilar aluminum alloy to advanced high strength steel," Materials & Design, vol. 59, pp. 50-62, 2014. [25] S. Lan, X. Liu, and J. Ni, "Microstructural evolution during friction stir welding of dissimilar aluminum alloy to advanced high-strength steel," The International Journal of Advanced Manufacturing Technology, vol. 82, pp. 2183-2193, 2015. [26] E. Taban, J. E. Gould, and J. C. Lippold, "Dissimilar friction welding of 6061-T6 aluminum and AISI 1018 steel: Properties and microstructural characterization," Materials & Design (1980-2015), vol. 31, pp. 2305-2311, 2010. [27] M. Movahedi, A. H. Kokabi, S. M. Seyed Reihani, W. J. Cheng, and C. J. Wang, "Effect of annealing treatment on joint strength of aluminum/steel friction stir lap weld," Materials & Design, vol. 44, pp. 487-492, 2013. [28] Q. Chang, D. Sun, X. Gu, and H. Li, "Microstructures and mechanical properties of metal inert-gas arc welded joints of aluminum alloy and ultrahigh strength steel using Al–Mg and Al–Cu fillers," Journal of Materials Research, vol. 32, pp. 666-676, 2017. [29] L. Cui, B. Chen, W. Qian, D. He, and L. Chen, "Microstructures and Mechanical Properties of Dissimilar Al/Steel Butt Joints Produced by Autogenous Laser Keyhole Welding," Metals, vol. 7, p. 492, 2017. [30] L. H. Shah, U. K. Mohamad, K. I. Yaakob, A. R. Razali, and M. Ishak, "Lap joint dissimilar welding of aluminium AA6061 and galvanized iron using TIG welding," Journal of Mechanical Engineering and Sciences, vol. 10, pp. 1817-1826, 2016. [31] J. L. Song, S. B. Lin, C. L. Yang, G. C. Ma, and H. Liu, "Spreading behavior and microstructure characteristics of dissimilar metals TIG welding– brazing of aluminum alloy to stainless steel," Materials Science and Engineering: A, vol. 509, pp. 31-40, 2009. [32] S. B. Lin, J. L. Song, C. L. Yang, C. L. Fan, and D. W. Zhang, "Brazability of dissimilar metals tungsten inert gas butt welding–brazing between aluminum alloy and stainless steel with Al–Cu filler metal," Materials & Design (1980-2015), vol. 31, pp. 2637-2642, 2010. [33] J. Sun, Q. Yan, Z. Li, and J. Huang, "Effect of bevel angle on microstructure and mechanical property of Al/steel butt joint using laser welding-brazing method," Materials & Design, vol. 90, pp. 468-477, 2016. [34] Z. Tong, Z. Zhentai, and Z. Rui, "A dynamic welding heat source model in pulsed current gas tungsten arc welding," Journal of Materials Processing Technology, vol. 213, pp. 2329-2338, 2013. [35] S. Fouladi, A. Ghasemi, M. Abbasi, M. Abedini, A. Khorasani, and I. Gibson, "The Effect of Vibration during Friction Stir Welding on Corrosion Behavior, Mechanical Properties, and Machining Characteristics of Stir Zone," Metals, vol. 7, p. 421, 2017. [36] M. Mehta, A. Arora, A. De, and T. DebRoy, "Tool Geometry for Friction Stir Welding—Optimum Shoulder Diameter," Metallurgical and Materials Transactions A, vol. 42, pp. 2716-2722, 2011. [37] H. Fujii, L. Cui, M. Maeda, and K. Nogi, "Effect of tool shape on mechanical properties and microstructure of friction stir welded aluminum alloys," Materials Science and Engineering: A, vol. 419, pp. 25-31, 2006. [38] S. Vijay and N. Murugan, "Influence of tool pin profile on the metallurgical and mechanical properties of friction stir welded Al–10 wt.% TiB2 metal matrix composite," Materials & Design, vol. 31, pp. 3585-3589, 2010. [39] Y. F. Sun, H. Fujii, N. Takaki, and Y. Okitsu, "Microstructure and mechanical properties of dissimilar Al alloy/steel joints prepared by a flat spot friction stir welding technique," Materials & Design, vol. 47, pp. 350- 357, 2013. [40] T. Tanaka, T. Morishige, and T. Hirata, "Comprehensive analysis of joint strength for dissimilar friction stir welds of mild steel to aluminum alloys," Scripta Materialia, vol. 61, pp. 756-759, 2009. [41] A. Yazdipour and A. Heidarzadeh, "Dissimilar butt friction stir welding of Al 5083-H321 and 316L stainless steel alloys," The International Journal of Advanced Manufacturing Technology, vol. 87, pp. 3105-3112, 2016. [42] Y. Chen and K. Nakata, "Microstructural characterization and mechanical properties in friction stir welding of aluminum and titanium dissimilar alloys," Materials & Design, vol. 30, pp. 469-474, 2009. [43] T. Saeid, A. Abdollah-Zadeh, and B. Sazgari, "Weldability and mechanical properties of dissimilar aluminum–copper lap joints made by friction stir welding," Journal of Alloys and Compounds, vol. 490, pp. 652-655, 2010. [44] J. Mohammadi, Y. Behnamian, A. Mostafaei, H. Izadi, T. Saeid, A. Kokabi, et al., "Friction stir welding joint of dissimilar materials between AZ31B magnesium and 6061 aluminum alloys: Microstructure studies and mechanical characterizations," Materials Characterization, vol. 101, pp. 189-207, 2015. [45] C. Pickover, Archimedes to Hawking: laws of science and the great minds behind them: Oxford University Press, 2008. [46] M. Acarer and B. Demir, "An investigation of mechanical and metallurgical properties of explosive welded aluminum–dual phase steel," Materials letters, vol. 62, pp. 4158-4160, 2008. [47] J. H. Han, J. P. Ahn, and M. C. Shin, "Effect of interlayer thickness on shear deformation behavior of AA5083 aluminum alloy/SS41 steel plates manufactured by explosive welding," Journal of Materials Science, vol. 38, pp. 13-18, 2003. [48] A. Szecket, O. Inal, D. Vigueras, and J. Rocco, "A wavy versus straight interface in the explosive welding of aluminum to steel," Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol. 3, pp. 2588- 2593, 1985. [49] K. B. Katarina Logg, Mikael Käll, "Optical Microscopy," Dept. of Applied Physics., 2017. [50] X-ray diffraction, Bragg's law and Laue equation. Available: https://eng.libretexts.org/Textbook_Maps/Chemical_Engineering/Supplem ental_Modules_(Materials_Science)/Electronic_Properties/Xray_diffraction%2C_Bragg's_law_and_Laue_equation [51] A. Standard, "E8/E8M, 2009. Standard test methods for tension testing of metallic materials. ASTM international, West Conshohocken PA; 2009. doi: 10.1520," E0008-E0008M-09, www. astm. org. [52] Q. Wang, D. Sun, Y. Na, Y. Zhou, X. Han, and J. Wang, "Effects of TIG welding parameters on morphology and mechanical properties of welded joint of Ni-base superalloy," Procedia Engineering, vol. 10, pp. 37-41, 2011. [53] E. Ikpe Aniekan, O. Ikechukwu, and E. Ikpe, "Effects of Arc Voltage and Welding Current on the Arc Length of Tungsten Inert Gas Welding (TIG)." [54] S. Aslanlar, A. Ogur, U. Ozsarac, E. Ilhan, and Z. Demir, "Effect of welding current on mechanical properties of galvanized chromided steel sheets in electrical resistance spot welding," Materials & design, vol. 28, pp. 2-7, 2007. [55] M. Suhail, M. F. Hasan, and P. Bharti, "Effect of Welding Speed, Current and voltage on Mechanical Properties of Underwater Welded Mild Steel Specimen (C, Mn, Si) with Insulated Electrode E6013." [56] B. Vishwakarma, M. Verma, and T. Mishra, "Investigation of Welding Parameters on Mechanical Properties of Different Welding Joints of Mild Steel‖," International Journal on Mechanical Engineering and Robotics (IJMER), vol. 1, pp. 23-27, 2013. [57] T. Wang, B.-g. Zhang, and J.-c. Feng, "Influences of different filler metals on electron beam welding of titanium alloy to stainless steel," Transactions of Nonferrous Metals Society of China, vol. 24, pp. 108-114, 2014. [58] L. A. Jácome, S. Weber, A. Leitner, E. Arenholz, J. Bruckner, H. Hackl, et al., "Influence of filler composition on the microstructure and mechanical properties of steel—aluminum joints produced by metal arc joining," Advanced Engineering Materials, vol. 11, pp. 350-358, 2009. [59] J. Song, S. Lin, C. Yang, and C. Fan, "Effects of Si additions on intermetallic compound layer of aluminum–steel TIG welding–brazing joint," Journal of Alloys and Compounds, vol. 488, pp. 217-222, 2009. [60] Y. Su, X. Hua, and Y. Wu, "Influence of alloy elements on microstructure and mechanical property of aluminum–steel lap joint made by gas metal arc welding," Journal of Materials Processing Technology, vol. 214, pp. 750- 755, 2014. [61] G. Ming, Z. Xiaoyan, and H. Qianwu, "Effects of gas shielding parameters on weld penetration of CO2 laser-TIG hybrid welding," Journal of Materials Processing Technology, vol. 184, pp. 177-183, 2007. [62] H.-Y. Huang, "Effects of shielding gas composition and activating flux on GTAW weldments," Materials & Design, vol. 30, pp. 2404-2409, 2009. [63] A. Durgutlu, "Experimental investigation of the effect of hydrogen in argon as a shielding gas on TIG welding of austenitic stainless steel," Materials & design, vol. 25, pp. 19-23, 2004. [64] J. Tusek and M. Suban, "Experimental research of the effect of hydrogen in argon as a shielding gas in arc welding of high-alloy stainless steel," International journal of hydrogen energy, vol. 25, pp. 369-376, 2000. [65] M. Dehghani, S. A. A. A. Mousavi, and A. Amadeh, "Effects of welding parameters and tool geometry on properties of 3003-H18 aluminum alloy to mild steel friction stir weld," Transactions of Nonferrous Metals Society of China, vol. 23, pp. 1957-1965, 2013. [66] K. A. Hassan, P. Prangnell, A. Norman, D. Price, and S. Williams, "Effect of welding parameters on nugget zone microstructure and properties in high strength aluminium alloy friction stir welds," Science and Technology of Welding and joining, vol. 8, pp. 257-268, 2003. [67] M. Ilangovan, S. R. Boopathy, and V. Balasubramanian, "Effect of tool pin profile on microstructure and tensile properties of friction stir welded dissimilar AA 6061–AA 5086 aluminium alloy joints," Defence Technology, vol. 11, pp. 174-184, 2015. [68] H. Liu, J. Hou, and H. Guo, "Effect of welding speed on microstructure and mechanical properties of self-reacting friction stir welded 6061-T6 aluminum alloy," Materials & Design, vol. 50, pp. 872-878, 2013. [69] A. ASTM, "A240/A240M-17, Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications," ed: ASTM International, West Conshohocken, PA Std, 2017. [70] H. Dong, W. Hu, Y. Duan, X. Wang, and C. Dong, "Dissimilar metal joining of aluminum alloy to galvanized steel with Al–Si, Al–Cu, Al–Si– Cu and Zn–Al filler wires," Journal of Materials Processing Technology, vol. 212, pp. 458-464, 2012. [71] E. DIN, "18273, Welding consumables–Wire electrodes, wires and rods for welding of aluminium and aluminium alloys–Classification," ed: Deutsches Institut für Normung, Berlin, 2004. [72] T. Aizawa, M. Kashani, and K. Okagawa, "Application of magnetic pulse welding for aluminum alloys and SPCC steel sheet joints," Welding Journal, vol. 86, pp. 119-124, 2007. [73] K.-J. Lee, S. Kumai, T. Arai, and T. Aizawa, "Interfacial microstructure and strength of steel/aluminum alloy lap joint fabricated by magnetic pressure seam welding," Materials Science and Engineering: A, vol. 471, pp. 95- 101, 2007. [74] D. Rager, "Structural Welding Code—Stainless Steel," AWS D1. 6/D1. 6M: 2007, p. 6, 2007. [75] S. Madhavan, M. Kamaraj, and L. Vijayaraghavan, "Microstructure and mechanical properties of cold metal transfer welded aluminium/dual phase steel," Science and Technology of Welding and Joining, vol. 21, pp. 194- 200, 2016. [76] Stress & Strain, accessed on Oct 19th, 2018. [Online]. Available: http://physicsnet.co.uk/a-level-physics-as-a2/materials/stress-strain/. [77] S. Lin, J. Song, C. Yang, C. Fan, and D. Zhang, "Brazability of dissimilar metals tungsten inert gas butt welding–brazing between aluminum alloy and stainless steel with Al–Cu filler metal," Materials & Design (1980- 2015), vol. 31, pp. 2637-2642, 2010. [78] S. Lin, J. Song, C. Yang, and G. Ma, "Metallurgical and mechanical investigations of aluminium-steel butt joint made by tungsten inert gas welding–brazing," Science and Technology of Welding and Joining, vol. 14, pp. 636-639, 2009. [79] Z. Ye, J. Huang, W. Gao, Y. Zhang, Z. Cheng, S. Chen, et al., "Microstructure and mechanical properties of 5052 aluminum alloy/mild steel butt joint achieved by MIG-TIG double-sided arc welding-brazing," Materials & Design, vol. 123, pp. 69-79, 2017. [80] A. Bouayad, C. Gerometta, A. Belkebir, and A. Ambari, "Kinetic interactions between solid iron and molten aluminium," Materials Science and Engineering: A, vol. 363, pp. 53-61, 2003. [81] K. Bouche, F. Barbier, and A. Coulet, "Intermetallic compound layer growth between solid iron and molten aluminium," Materials Science and Engineering: A, vol. 249, pp. 167-175, 1998. [82] N. Tang, Y. Li, S. Kurosu, Y. Koizumi, H. Matsumoto, and A. Chiba, "Interfacial reactions of solid Co and solid Fe with liquid Al," Corrosion Science, vol. 60, pp. 32-37, 2012. [83] J. L. Song, S. B. Lin, C. L. Yang, and C. L. Fan, "Effects of Si additions on intermetallic compound layer of aluminum–steel TIG welding–brazing joint," Journal of Alloys and Compounds, vol. 488, pp. 217-222, 2009. [84] H. Zhang and J. Liu, "Microstructure characteristics and mechanical property of aluminum alloy/stainless steel lap joints fabricated by MIG welding–brazing process," Materials Science and Engineering: A, vol. 528, pp. 6179-6185, 2011. [85] L. A. Jácome, S. Weber, A. Leitner, E. Arenholz, J. Bruckner, H. Hackl, et al., "Influence of Filler Composition on the Microstructure and Mechanical Properties of Steel-Aluminum Joints Produced by Metal Arc Joining," Advanced Engineering Materials, vol. 11, pp. 350-358, 2009. [86] Y. Shi, L. Shao, J. Huang, and Y. Gu, "Effects of Si and Mg elements on the microstructure of aluminum–steel joints produced by pulsed DE-GMA welding–brazing," Materials Science and Technology, vol. 29, pp. 1118- 1124, 2013. [87] A. Handbook, "volume 12: fractography," ASM International Materials Park, vol. 55, 1987. [88] M. Pourali, A. Abdollah-zadeh, T. Saeid, and F. Kargar, "Influence of welding parameters on intermetallic compounds formation in dissimilar steel/aluminum friction stir welds," Journal of Alloys and Compounds, vol. 715, pp. 1-8, 2017. [89] Y. C. Chen and K. Nakata, "Effect of the Surface State of Steel on the Microstructure and Mechanical Properties of Dissimilar Metal Lap Joints of Aluminum and Steel by Friction Stir Welding," Metallurgical and Materials Transactions A, vol. 39, pp. 1985-1992, 2008. [90] S. Zimmer, L. Langlois, J. Laye, and R. Bigot, "Experimental investigation of the influence of the FSW plunge processing parameters on the maximum generated force and torque," The International Journal of Advanced Manufacturing Technology, vol. 47, pp. 201-215, 2009. [91] Q. Zheng, X. Feng, Y. Shen, G. Huang, and P. Zhao, "Dissimilar friction stir welding of 6061 Al to 316 stainless steel using Zn as a filler metal," Journal of Alloys and Compounds, vol. 686, pp. 693-701, 2016. [92] H. Das, S. Basak, G. Das, and T. K. Pal, "Influence of energy induced from processing parameters on the mechanical properties of friction stir welded lap joint of aluminum to coated steel sheet," The International Journal of Advanced Manufacturing Technology, vol. 64, pp. 1653-1661, 2012.
|