|
[1]K. Hill, Y. Fujii, D. C. Johnson, and B. Kawasaki, "Photosensitivity in optical fiber waveguides: Application to reflection filter fabrication," Applied physics letters, vol. 32, pp. 647-649, 1978. [2]J. Martin, J. Lauzon, S. Thibault, and F. Ouellette, "Novel writing technique of long and highly reflective in-fiber Bragg gratings and investigation of the linearly chirped component," in Optical Fiber Communication Conference, 1994, p. PD29. [3]Z. Zhao, S. Zhang, Y. Yu, Z. Zhuo, J. Zhang, W. Zheng, et al., "Fabrication of a tilted fiber Bragg grating with a designed reflection spectrum profile," Optics letters, vol. 29, pp. 244-246, 2004. [4]A. Kameyama, M. Katto, and A. Yokotani, "A simplified fabrication technique for tilted fiber Bragg grating for the simultaneous measurement of refractive index and temperature of liquids," Journal of Laser Micro Nanoengineering, vol. 9, p. 230, 2014. [5]T. Guo, F. Liu, B.-O. Guan, and J. Albert, "Tilted fiber grating mechanical and biochemical sensors," Optics & Laser Technology, vol. 78, pp. 19-33, 2016. [6]R. Wang, J. Si, T. Chen, L. Yan, H. Cao, X. Pham, et al., "Fabrication of high-temperature tilted fiber Bragg gratings using a femtosecond laser," Optics express, vol. 25, pp. 23684-23689, 2017. [7]X. Chen, K. Zhou, L. Zhang, and I. Bennion, "Optical chemsensor based on etched tilted Bragg grating structures in multimode fiber," IEEE photonics technology letters, vol. 17, pp. 864-866, 2005. [8]C. Chen, C. Caucheteur, P. Mégret, and J. Albert, "The sensitivity characteristics of tilted fibre Bragg grating sensors with different cladding thicknesses," Measurement Science and Technology, vol. 18, p. 3117, 2007. [9]Y. Miao, B. Liu, S. Tian, and Q. Zhao, "Temperature‐insensitive refractive index sensor based on tilted fiber Bragg grating," Microwave and Optical Technology Letters, vol. 51, pp. 479-483, 2009. [10]K. S. Chiang, Y. Liu, M. N. Ng, and X. Dong, "Analysis of etched long-period fibre grating and its response to external refractive index," Electronics Letters, vol. 36, pp. 966-967, 2000. [11]G. Laffont and P. Ferdinand, "Tilted short-period fibre-Bragg-grating-induced coupling to cladding modes for accurate refractometry," Measurement Science and Technology, vol. 12, p. 765, 2001. [12]Y.-p. Miao and B. Liu, "Refractive index sensor based on measuring the transmission power of tilted fiber Bragg grating," Optical Fiber Technology, vol. 15, pp. 233-236, 2009. [13]Y. Miao, B. Liu, H. Zhang, Y. Li, H. Zhou, H. Sun, et al., "Relative humidity sensor based on tilted fiber Bragg grating with polyvinyl alcohol coating," IEEE Photonics technology letters, vol. 21, pp. 441-443, 2009. [14]L. Wang, N. Fang, Z. Huang, and M. Abadie, "Polyimide-coated fiber Bragg grating sensors for humidity measurements," High Performance Polymers-Polyimides Based-From Chemistry to Applications, 2012. [15]Y. Lin, Y. Gong, Y. Wu, and H. Wu, "Polyimide-coated fiber Bragg grating for relative humidity sensing," Photonic sensors, vol. 5, pp. 60-66, 2015. [16]Y. Wang, C. Shen, W. Lou, F. Shentu, C. Zhong, X. Dong, et al., "Fiber optic relative humidity sensor based on the tilted fiber Bragg grating coated with graphene oxide," Applied Physics Letters, vol. 109, p. 031107, 2016. [17]Y.-D. Chiu, C.-W. Wu, and C.-C. Chiang, "Tilted fiber Bragg grating sensor with graphene oxide coating for humidity sensing," Sensors, vol. 17, p. 2129, 2017. [18]S. F. Correia, P. Antunes, E. Pecoraro, P. P. Lima, H. Varum, L. D. Carlos, et al., "Optical fiber relative humidity sensor based on a FBG with a di-ureasil coating," Sensors, vol. 12, pp. 8847-8860, 2012. [19]W. Wang, T. Sun, J. Peng, J. Dai, and M. Yang, "Humidity Sensor Based on Fiber BraggGratingCoated With DifferentPore-FoamingAgentDopedPolyimides," IEEE Photonics Technology Letters, vol. 29, pp. 1963-1966, 2017. [20]H. Alsweefe, S. K. Al-Hayali, and A. H. M. Al-Janabi, "Efficient humidity sensor based on an etched no-core fiber coated with copper oxide nanoparticles," Journal of Nanophotonics, vol. 12, p. 046018, 2018. [21]S. Novais, M. Ferreira, and J. Pinto, "Relative Humidity Fiber Sensor Based on Multimode Interferometer Coated with Agarose-Gel," Coatings, vol. 8, p. 453, 2018. [22]T. Sun, W. Wang, J. Peng, Y. Qu, J. Dai, and M. Yang, "Fiber Bragg Grating Humidity Sensor Based on Polymer Coating with Activated Carbon Topping Layer," in Optical Fiber Sensors, 2018, p. TuE38. [23]B. Jiang, Z. Bi, Z. Hao, Q. Yuan, D. Feng, K. Zhou, et al., "Graphene oxide-deposited tilted fiber grating for ultrafast humidity sensing and human breath monitoring," Sensors and Actuators B: Chemical, vol. 293, pp. 336-341, 2019. [24]E. Chehura, S. W. James, and R. P. Tatam, "Simultaneous independent measurement of temperature and strain using a tilted fibre Bragg grating," in Third European Workshop on Optical Fibre Sensors, 2007, p. 66190I. [25]L.-Y. Shao, Y. Shevchenko, and J. Albert, "Intrinsic temperature sensitivity of tilted fiber Bragg grating based surface plasmon resonance sensors," Optics express, vol. 18, pp. 11464-11471, 2010. [26]Y.-p. Miao, B. Liu, and K. Zhang, "Linear edge and temperature characteristic of tilted fiber Bragg gratings cladding-mode envelope," Optical Fiber Technology, vol. 17, pp. 286-290, 2011. [27]Y. F. Gao, C. Liu, and H. W. Mu, "Effects of Temperature Changes on the Transmission Spectra of Tilted Fiber Bragg Grating," in Advanced Materials Research, 2014, pp. 462-465. [28]B. Gu, W. Qi, J. Zheng, Y. Zhou, P. P. Shum, and F. Luan, "Simple and compact reflective refractometer based on tilted fiber Bragg grating inscribed in thin-core fiber," Optics letters, vol. 39, pp. 22-25, 2014. [29]X. Dong, K. I. Hajim, J. Yang, and R. K. Ahmed, "TILTED FIBER BRAGG GRATINGS (TFBGs) TEMPERATURE SENSING ELEMENT USING 244NM Ar+ LASER WRITTEN ON SIDE HOLE FIBER," Diyala Journal of Engineering sciences, vol. 8, pp. 116-123, 2015. [30]F. Huang, T. Chen, J. Si, X. Pham, and X. Hou, "Fiber laser based on a fiber Bragg grating and its application in high-temperature sensing," Optics Communications, 2019. [31]M.-S. Kwon and W. H. Steier, "Glucose senosr based on two distinct microring resonators," in OECC/ACOFT 2008-Joint Conference of the Opto-Electronics and Communications Conference and the Australian Conference on Optical Fibre Technology, 2008, pp. 1-2. [32]S. Binu, V. M. Pillai, V. Pradeepkumar, B. Padhy, C. Joseph, and N. Chandrasekaran, "Fibre optic glucose sensor," Materials Science and Engineering: C, vol. 29, pp. 183-186, 2009. [33]S. W. Harun, A. A. Jasim, H. A. Rahman, M. Z. Muhammad, and H. Ahmad, "Micro-ball lensed fiber-based glucose sensor," IEEE Sensors Journal, vol. 13, pp. 348-350, 2012. [34]D. Li, S. Yu, C. Sun, C. Zou, H. Yu, and K. Xu, "U-shaped fiber-optic ATR sensor enhanced by silver nanoparticles for continuous glucose monitoring," Biosensors and Bioelectronics, vol. 72, pp. 370-375, 2015. [35]H. U. Hassan, J. Janting, S. Aasmul, and O. Bang, "Polymer optical fiber compound parabolic concentrator fiber tip-based glucose sensor: In vitro testing," IEEE Sensors Journal, vol. 16, pp. 8483-8488, 2016. [36]J. Huang, M. Li, P. Zhang, P. Zhang, and L. Ding, "Temperature controlling fiber optic glucose sensor based on hydrogel-immobilized GOD complex," Sensors and Actuators B: Chemical, vol. 237, pp. 24-29, 2016. [37]C.-T. Wang and C.-C. Chiang, "The application of a U-shaped whispering-gallery mode-based optical fiber sensor for glucose measurement," in 2016 International Conference on Advanced Materials for Science and Engineering (ICAMSE), 2016, pp. 573-576. [38]C.-W. Wu, C.-Y. Kuo, J.-W. Lin, and C.-C. Chiang, "Application of a WGM optical fiber probe fabricated by 3D printing technology for glucose concentration measurement," Optical and Quantum Electronics, vol. 49, p. 29, 2017. [39]C. Zhang, Z. Li, S. Z. Jiang, C. H. Li, S. C. Xu, J. Yu, et al., "U-bent fiber optic SPR sensor based on graphene/AgNPs," Sensors and Actuators B: Chemical, vol. 251, pp. 127-133, 2017. [40]M. Azkune Ulla, L. Ruiz Rubio, G. Aldabaldetreku Etxeberria, E. Arrospide Zabala, L. Pérez Álvarez, I. Bikandi Irazabal, et al., "U-Shaped and Surface Functionalized Polymer Optical Fiber Probe for Glucose Detection," 2017. [41]Y. Miao, B. Liu, and Q. Zhao, "Simultaneous measurement of strain and temperature using single tilted fibre Bragg grating," Electronics Letters, vol. 44, pp. 1242-1243, 2008. [42]N. J. Alberto, C. A. Marques, J. L. Pinto, and R. N. Nogueira, "Three-parameter optical fiber sensor based on a tilted fiber Bragg grating," Applied Optics, vol. 49, pp. 6085-6091, 2010. [43]Q. Jiang, D. Hu, and M. Yang, "Simultaneous measurement of liquid level and surrounding refractive index using tilted fiber Bragg grating," Sensors and Actuators A: Physical, vol. 170, pp. 62-65, 2011. [44]P. Kisała, D. Harasim, and J. Mroczka, "Temperature-insensitive simultaneous rotation and displacement (bending) sensor based on tilted fiber Bragg grating," Optics express, vol. 24, pp. 29922-29929, 2016. [45]T. Osuch, T. Jurek, K. Markowski, and K. Jedrzejewski, "Simultaneous measurement of liquid level and temperature using tilted fiber Bragg grating," IEEE Sensors Journal, vol. 16, pp. 1205-1209, 2015. [46]C. Wang, G. Yan, Z. Lian, X. Chen, S. Wu, and S. He, "Hybrid-cavity fabry-perot interferometer for multi-point relative humidity and temperature sensing," Sensors and Actuators B: Chemical, vol. 255, pp. 1937-1944, 2018. [47]X. Dong, T. Li, Y. Liu, Y. Li, C.-L. Zhao, and C. C. Chan, "Polyvinyl alcohol-coated hybrid fiber grating for relative humidity sensing," Journal of biomedical optics, vol. 16, p. 077001, 2011. [48]M. Shao, X. Qiao, H. Fu, H. Li, J. Zhao, and Y. Li, "A Mach–Zehnder interferometric humidity sensor based on waist-enlarged tapers," Optics and Lasers in Engineering, vol. 52, pp. 86-90, 2014. [49]J. Yang, X. Dong, K. Ni, C. C. Chan, and P. P. Shun, "Intensity-modulated relative humidity sensing with polyvinyl alcohol coating and optical fiber gratings," Applied optics, vol. 54, pp. 2620-2624, 2015. [50]Y. L. Yu, H. H. Hung, S. K. Liaw, M. H. Shih, H. Kishikawa, and N. Goto, "Simultaneously two‐parameter measurement using tilted fiber grating and long period fiber grating," Microwave and Optical Technology Letters, vol. 59, pp. 1122-1125, 2017. [51]T. Erdogan, "Fiber grating spectra," Journal of lightwave technology, vol. 15, pp. 1277-1294, 1997. [52]A. Harris and P. Castle, "Bend loss measurements on high numerical aperture single-mode fibers as a function of wavelength and bend radius," Journal of Lightwave technology, vol. 4, pp. 34-40, 1986. [53]H. Renner, "Bending losses of coated single-mode fibers: a simple approach," Journal of Lightwave technology, vol. 10, pp. 544-551, 1992. [54]T. Liu, Y. Chen, Q. Han, and X. Lü, "Magnetic field sensor based on U-bent single-mode fiber and magnetic fluid," IEEE Photonics Journal, vol. 6, pp. 1-7, 2014. [55]X. Zhang and W. Peng, "Bent-fiber intermodal interference based dual-channel fiber optic refractometer," Optics express, vol. 23, pp. 7602-7610, 2015. [56]K. Byron, K. Sugden, T. Bricheno, and I. Bennion, "Fabrication of chirped Bragg gratings in photosensitive fibre," Electronics letters, vol. 29, pp. 1659-1660, 1993. [57]R. Kashyap, Fiber bragg gratings: Academic press, 2009. [58]M. Nasrollahzadeh, F. Babaei, P. Fakhri, and B. Jaleh, "Synthesis, characterization, structural, optical properties and catalytic activity of reduced graphene oxide/copper nanocomposites," Rsc Advances, vol. 5, pp. 10782-10789, 2015. [59]K. Kawano, R. Pacios, D. Poplavskyy, J. Nelson, D. D. Bradley, and J. R. Durrant, "Degradation of organic solar cells due to air exposure," Solar energy materials and solar cells, vol. 90, pp. 3520-3530, 2006. [60]J. Huang, P. F. Miller, J. S. Wilson, A. J. de Mello, J. C. de Mello, and D. D. Bradley, "Investigation of the effects of doping and post‐deposition treatments on the conductivity, morphology, and work function of poly (3, 4‐ethylenedioxythiophene)/poly (styrene sulfonate) films," Advanced Functional Materials, vol. 15, pp. 290-296, 2005. [61]W. A. Daoud, J. H. Xin, and Y. S. Szeto, "Polyethylenedioxythiophene coatings for humidity, temperature and strain sensing polyamide fibers," Sensors and Actuators B: Chemical, vol. 109, pp. 329-333, 2005. [62]J. Liu, M. Agarwal, K. Varahramyan, E. S. Berney IV, and W. D. Hodo, "Polymer-based microsensor for soil moisture measurement," Sensors and Actuators B: Chemical, vol. 129, pp. 599-604, 2008. [63]S. Taccola, F. Greco, A. Zucca, C. Innocenti, C. s. de Julián Fernández, G. Campo, et al., "Characterization of free-standing PEDOT: PSS/iron oxide nanoparticle composite thin films and application as conformable humidity sensors," ACS applied materials & interfaces, vol. 5, pp. 6324-6332, 2013. [64] 張睿廷, "S型長周期光纖光柵磁場與濕度感測器之研製, 國立高雄應用科技大學機械系碩士論文," 2017.
|