臺灣博碩士論文加值系統

摘要 i
Abstract ii
誌謝 iii
符號表 iv
目錄 vi
表目錄 viii
圖目錄 ix
第一章 緒論 1
1.1 前言 1
1.2 研究動機與目的 3
1.3 本文架構 4
第二章 文獻回顧 5
2.1 鋁金屬相關文獻回顧 5
2.2 多尺度法相關文獻回顧 5
2.3 奈米沖壓與壓印相關文獻回顧 6
第三章 多尺度法理論介紹 8
3.1 多尺度法基本介紹 8
3.2 局部區域建立及運算 13
3.3 非局部區域能量運算 14
3.4 局部區與非局部區的耦合 15
3.5 局部區域與非局部區域的判別方法 16
3.6 網格自適應方法 16
第四章 金屬奈米沖切特性 18
4.1 金屬奈米沖切特性簡介 18
4.2 模擬之物理模型 18
4.3 不同晶體方向性對沖切的影響 23
4.4 不同材料厚度與對沖切的影響 36
4.5 不同預留間隙對沖切的影響 46
4.6 不同沖頭角度對沖切的影響 58
第五章 結論與未來展望 68
5.1 結論 68
5.2 未來展望 70
參考文獻 71
個人簡歷 78

[1] D.L. Schodek , P. Ferreira , and M.F. Ashby. Nanomaterials, nanotechnologies and
design: an introduction for engineers and architects. Butterworth-Heinemann ,
(2009).
[2] N. Taniguchi. On the basic concept of nanotechnology. Proceeding of the
International Conference on Production Engineering , Tokyo , pp.18-23, (1974).
[3] A.I. Hochbaum and P. Yang. Semiconductor nanowires for energy
conversion. Chemical Reviews , vol.110 , pp.527-546 , (2010).
[4] J.H. Bang , and K.S. Suslick . Applications of ultrasound to the synthesis of nanostructured materials. Advanced Materials , vol.22 , pp.1039-1059 , (2010).
[5] S. Barth , F. Hernandez-Ramirez , J.D. Holmes and A.Romano-Rodriguez .
Synthesis and applications of one-dimensional semiconductors . Progress in
Materials Science , vol.55 , pp.563-627 , (2010).
[6] 魏毓呈，準連續法分析金屬表面之壓印與切削特性，機械工程系碩士論文，國立高雄科技大學，(2020)。
[7] C.C. Liu , and Y.W. Chang. 從半導體到民生消耗品 奈米科技無處不在.
IEKTopics , (2018).
[8] O. Rokoš , R.H. Peerlings , and J. Zeman . eXtended variational quasicontinuum methodology for lattice networks with damage and crack propagation . Computer Methods in Applied Mechanics and Engineering , vol.320 , pp.769-792 , (2017).
[9] E.B. Tadmor , M. Ortiz and R. Phillips . Quasicontinuum analysis of defects in solids. Philosophical Magazine A , vol.73, pp.1529-1563 , (1996).
[10] H. Davy. Electro-chemical researches, on the decomposition of the earths; with observations on the metals obtained from the alkaline earths, and on the amalgam procured from ammonia . Philosophical Transactions of the Royal Society of London , vol.(98) , pp.333-370 , (1808).
[11] H.C. Ö rsted . Overview of the Royal Danish Science Society's Proceedings and the Work of its Members. pp.15-16 , (1825).
[12] E.A Starke Jr , and J.T. Staley . Application of modern aluminum alloys to
aircraft . Progress in aerospace sciences , vol.32(2-3) , pp.131-172 , (1996).
[13] F. Sansoz and J.F. Molinari . Mechanical behavior of Σ tilt grain boundaries in nanoscale Cu and Al: A quasicontinuum study. Acta Materialia, vol.53(7) ,pp.1931-1944, (2005).
[14] A.S. Tran , T.H.Fang , L.R. Tsai and C.H. Chen . Friction and scratch
characteristics of textured and rough surfaces using the quasi-continuum
method. Journal of Physics and Chemistry of Solids , vol.126 , pp.180-188 ,
(2019).
[15] X. Meng , C. Fang and K. Niu . Tribological behavior anisotropy in sliding
interaction of asperities on single-crystal α-iron: A quasi-continuum
study. Tribology International , vol.118 , pp.347-359 , (2018).
[16] L. Zhang , H. Zhao , W. Guo , Z. Ma and X. Wang . Quasicontinuum analysis of the effect of tool geometry on nanometric cutting of single crystal
copper. Optik ,vol.125(2) , pp.682-687 , (2014).
[17] Y.F. Shao and S.Q.Wang . Quasicontinuum study on formation of fivefold
deformation twin in nanocrystalline aluminum. Scripta Materialia , vol.62(6) ,
pp.419-422 , (2010).
[18] I.R. Vatne , E. Ø stby , C. Thaulow and D. Farkas . Quasicontinuum simulation of crack propagation in bcc-Fe . Materials Science and Engineering: A, vol.528(15) , pp.5122-5134, (2011).
[19] C. Fang and X. Yang . Study of nanocontact and incipient nanoscratch process using the quasicontinuum method . Materials Science and Engineering: A,
vol.600 , pp.221-230 , (2014).
[20] C. Fang , X. Meng , Y. Xie and B. Zhao . Quasicontinuum investigation of the feedback effects on friction behavior of an abrasive particle over a single crystal aluminum substrate. Tribology International , vol.98 , pp48-58 , (2016).
[21] P. Chen and Y. Shen . Nanocontact between BCC tungsten and FCC nickel using
the quasicontinuum method . International Journal of Solids and Structures,
vol.45(24) , pp.6001-6017 , (2008).
[22] H.M. Pen , Y.C. Liang , X.C. Luo , Q.S. Bai , S.Goel and J.M. Ritchie . Multiscale simulation of nanometric cutting of single crystal copper and its experimental validation . Computational Materials Science , vol.50(12) , 3431-3441 , (2011).
[23] B. Zhang and W.J. Meng . Effects of punch geometry and grain size in micron scale compression molding of copper . Materials & Design , vol.206 ,109807 , (2021).
[24] K. Chen , W.J. Meng , F. Mei , J. Hiller and D.J. Miller . From micro-to nano-scale molding of metals: Size effect during molding of single crystal Al with rectangular strip punches . Acta Materialia , vol.59(3) , pp.1112-1120 , (2011).
[25] O. Alizadeh , G.T. Eshlaghi and S. Mohammadi . Nanoindentation simulation of coated aluminum thin film using quasicontinuum method . Computational
Materials Science , vol.111 , pp.12-22 , (2016).
[26] T.H. Fang , C.D. Wu and W.J. Chang . Molecular dynamics analysis of
nanoimprinted Cu–Ni alloys . Applied Surface Science , vol.253(16) ,
pp.6963-6968 , (2007).
[27] C.H. Wang , K.C. Chao , T.H. Fang , I. Stachiv and S.F. Hsieh . Investigations of the mechanical properties of nanoimprinted amorphous Ni–Zr alloys utilizing the molecular dynamics simulation . Journal of Alloys and Compounds , vol.659, pp.224-231 , (2016).
[28] B.Y. Joo , S.H. Rhim and S.I. Oh . Micro-hole fabrication by mechanical punching process . Journal of Materials Processing Technology , vol.170(3) , pp.593-601 , (2005).
[29] T.H. Fang , W.J.Chang , D.J.Yu and C.C. Huang . Microscopic properties of a
nanocrystal aluminum thin film during nanoimprint using quasi-continuous
method . Thin Solid Films , vol.612 , pp.237-242 , (2016).
[30] L. Zhang , A.M. Elwazri , T. Zimmerly and M. Brochu . Shear punch testing and fracture toughness of bulk nanostructured silver . Materials & Design , vol.30(5) , pp.1445-1450 , (2009).
[31] H. Lu and Y. Ni . Effect of surface step on nanoindentation of thin films by multiscale analysis . Thin Solid Films , vol.520(15) , pp.4934-4940 , (2012).
[31] C.H. Wang , T.H. Fang , P.C. Cheng , C.C. Chiang and K.C. Chao . Simulation and experimental analysis of nanoindentation and mechanical properties of amorphous Nial Alloys . Journal of Molecular Modeling , vol.21(6) , pp.161 , (2015).
[32] 余東杰，多尺度模擬金屬薄膜奈米轉印之機械特性，機械工程系碩士論文，國立高雄應用科技大學，(2016)。
[33] R.E. Miller and E.B. Tadmor . The quasicontinuum method：over view ,
applications and current directions . Journal of Computer-Aided Materials Design ,vol.9(3) , pp.203-239 , (2002).
[34] E.B. Tadmor and R. Phillips . Mixed atomic and continuum models of deformation in solids . Langmuir , vol.12(19) , pp.4529-4534 , (1996).
[35] J.S. Amelang , G.N. Venturini and D.M. Kochmann . Summation rules foe a fully nonlocal energy-based quasicontinuum method . Journal of the Mechanics and
Physics of Solids , vol.(82) , pp.663-682 , (2005).
[36] R.G. Parr . Density functional theory . Annual Review of Physical Chemistry,vol.34(1) , pp.631-656 , (1983).
[37] V.B. Shenoy , R. Miller , E.B. Tadmor , D. Rodney , R. Phillips and M. Ortiz . An adaptive finite element approach to atomic-scale mechanics-the quaicontinuum method . Journal of the Mechanics and Physics of Solids ,vol.(47) , pp.611-642 ,(1999).
[38] 林英志，多尺度法模擬金屬奈米線接合與機械效應，機械工程系碩士論文，國立高雄應用科技大學，(2017)。
[39] 蘇玟承，準連續法研究異質界面之機械與變形特性，機械工程系碩士論文，國立高雄科技大學，(2019)。
[40] O.C. Zienkiewicz and R.L. Taylor , “The Finite Element Method ,”.McGraw-Hill London , (1977).
[41] E. Weinan and P. Ming . Cauchy-Born Rule and the Stability of Crystalline Solids：Static Problems . Archive for Rational Mechanics and Analysis , vol.183 ,pp.241-297 , (2007).
[42] R. Miller , E.B. Tadmor , R. Phillips and M. Ortiz . Quasicontinuum simulation of fracture at the atomic scale . Modelling and Simulation in Materials Science and Engineering , vol.6(5) , pp.607 , (1998).
[43] O.C. Zienkiewicz and J.Z. Zhu . A simple error estimator and adaptive procedure for practical engineering analysis . International journal for numerical methods in engineering , vol.24 , pp.337-357 , (1987).
[44] 林奕辰，準連續法分析鎳和鐵之裂縫成長與擴展特性，機械工程系碩士論文，國立高雄應用科技大學，(2017)。
[45] F. Ercolessi and J.B. Adams . Interatomic potentials from first-principles
calculations: the force-matching method . EPL (Europhysics Letters) , vol.26(8) ,pp.583 , (1994).
[46] 陳重熺，準連續法分析鋁之研磨與壓印特性，機械工程系碩士論文，國立高
雄科技大學，(2018)。
[47] H. Lu , Y. Ni , J. Mei , J. Li and H. wang . Anisotropic Plastic Deformation beneath Surface Step During Nanoindentation of FCC Al by Multiscale Analysis . Computational Materials Science , vol.58 , pp.192-200 , (2012).
[48] J. Jin , S.A.Shevlin and Z.X. Guo . Multiscale simulation of onset plasticity during nanoindentation of Al (0 0 1) surface . Acta Materialia , vol.56(16) , pp.4358-4368 , (2008).