|
[1]工具機發展基金會2022年1~10月台灣工具機產業現況報導http://www.tami.org.tw/market/taiwan_mt_2022_10.html. [2]長岡石油株式会社, 網頁官網. https://nagaoka-oil.jp/ [3]王永謙、金文修、田久旺,潤滑油基礎與應用,第1章,ISBN: 957-21-1125-6,全華科技圖書股份有限公司,1995. [4]D-A Lubricant Company, http://www.dalube.com/. [5]Japansese Society of Tribologists, Overview of the Japanese Society of Tribologists,http://www.tribology.jp/zokyo/shokai_e.htm. [6]切削加工油概論. (2023). 石油情報. https://www.oil.net.tw/lbg2006/chapter/4-1.php [7]K. Sutherland, "Managing cutting fluids used in metal working, " Filtration and Separation, 2008, pp. 20-23. [8]L. R. Rudnick, "Synthetic, mineral oils and bio-based lubricants," Chemistry and Technology, CRC Taylor and Francis, Boca Raton New York London, 2006. [9]L.R. Rudnick, R.L. Shubkin, "Synthetic Lubricants and High-performance Functional Fluids," New York: Marcel Dekker, Inc., 1999. [10]K. Sutherland, "Managing cutting fluids used in metal working, " Filtration and Separation, 2008, pp. 20-23. [11]J.M.Vieira, A.R.Machado, E.O.Ezugwu, "Performance of cutting fluids during face milling of steels, "Journal of Materials Processing Technology 116(2001)244-251. [12]M.Rahman, A.Senthil Kumar, M.R.Choudhury, "Identification of effective zones for high pressure coolant in milling, " CIRP Annals 49 (1) (2000) 47-52. [13]A.S. Varadarajan, P. K. Philip, B. Ramamoorthy, "Investigations on hard turning with minimal cutting fluid application(HTMF) and its comparison with dry and wet turning," International Journal of Machine Tools & Manufacture 42 (2002) 193-200. [14]J.F.Kelly, M.G.Cotterell, "Minimal lubrication machining of aluminum alloys," Journal of Materials Processing Technology 120 (2002) 327 -334. [15]N.R.Dhar, S.Pual,A.B. Chattopadhay, "Machining of AISI 4140 steel under cryogenic cooling-tool wear,surface roughness and dimensional deviation, " Journal of Materials Processing Technology 123(2002) 483-489. [16]S.Shaji, V.Radhakrishnan, "An investigation on surface grinding using as lubricant, " International Journal of Machine Tools & Manufacture 42(2002) 733-740. [17]Shiva Kalidas, Rrichard E.De Vor, Shiva Kapoor, "Experimental investigation of the effect of drill coatings on hole quality under dry and wet conditios, "Surface and Coatings Technology 148 (2001)117-128. [18]溫詩鑄,1998,奈米摩擦學,清華大學出版社. [19]史崔佩克圖Horng J. H., Yu C. C, Chen Y Y. *, 2021, “Tribological Characteristics and Load-Sharing of Point-Contact Interface in Three-Body Mixed Lubrication”, ASME, Journal of Tribology. Vol. 144, 052201. [20]H. Isoyama, T. Sakurai, "The lubricating mechanism of di-u-thio-dithio-bis (diethyldithiocarbamate) dimolybdenum during extreme pressure lubrication," Tribology, vol. 7, 1974, pp. 151-160. [21]J. Zimmerman, A. Clarens, K. Hayes and S. Skerlos, "Design of hard water stable emulsifier systems for petroleum and bio-based semi-synthetic metalworking fuids, " Environ. Sci. Technol., Vol. 37, 2003, pp. 5278-88. [22]胡志孟與劉麒榮,棚化植物油的摩擦化研究,潤滑與密封第2期,19,第57-58頁. [23]卡爾費休法 http://cht.a-hospital.com/w/%E9%A6%96%E9%A1%B5. [24]酸鹼度測定儀 https://teaching.ch.ntu.edu.tw/gclab/doc/tech-basic/pH-meter.pdf.
|