|
[1]Anna Rudawska, Adhesive joint strength of hybrid assemblies:Titanium sheet-composites and aluminium sheet-composites—Experimental and numerical verification, International Journal of Adhesion and Adhesives, 30(7), 574–582, 2010. [2]P. Zhu, X. Feng, Z. Liu, M. Huang, H. Xie, and M. A. Soto, Reliable packaging of optical fiber Bragg grating sensors for carbon fiber composite wind turbine blades. Composites Science and Technology, 213, 108933, 2021. [3]David R. Speth, Yu Ping Yang, George W. Ritter, Qualification of adhesives for marine composite-to-steel applications, International Journal of Adhesion and Adhesives, 30(2), 55–62, 2010. [4]G. Di Bella, G. Galtieri, E. Pollicino, C. Borsellino. Mechanical characterization of adhesive joints with dissimilar substrates for marine applications, International Journal of Adhesion and Adhesives, 41, 33-40, 2013. [5]C. M. Lawrence, D. V. Nelson, J. R. Spingarn, and T. E. Bennett, "Measurement of process-induced strains in composite materials using embedded fiber optic sensors," in Smart Structures and Materials 1996: Smart Sensing, Processing, and Instrumentation, San Diego, CA, USA, 1996, vol. 2718, pp. 60-68. [6]V. Dewynter-Marty, P. Ferdinand, E. Bocherens, R. Carbone, H. Beranger, S. Bourasseau, M. Dupont, and D. Balageas, "Embedded Fiber Bragg Grating Sensors for Industrial Composite Cure Monitoring," Journal of Intelligent Material Systems and Structures, vol. 9, pp. 785-787, 1998. [7]K. T. Slattery, K. Corona-Bittick, and D. J. Dorr, "Composite cure monitoring with Bragg grating sensors," in Process Control and Sensors for Manufacturing, San Antonio, TX, USA, 1998, vol. 3399, pp. 114-121. [8]K. S. C. Kuang, R. Kenny, M. P. Whelan, W. J. Cantwell, and P. R. Chalker, "Embedded fibre Bragg grating sensors in advanced composite materials," Composites Science and Technology, vol. 61, pp. 1379-1387, 2001. [9]K. S. C. Kuang, R. Kenny, M. P. Whelan, W. J. Cantwell, and P. R. Chalker, "Residual strain measurement and impact response of optical fibre Bragg grating sensors in fibre metal laminates," Smart Materials and Structures, vol. 10, pp. 338-346, 2001. [10]Y. Okabe, S. Yashiro, R. Tsuji, T. Mizutani, and N. Takeda, "Effect of thermal residual stress on the reflection spectrum from fiber Bragg grating sensors embedded in CFRP laminates," Composites Part A: Applied Science and Manufacturing, vol. 33, pp. 991-999, 2002. [11]H. K. Kang, D. H. Kang, H. J. Bang, C. S. Hong, and C. G. Kim, "Cure monitoring of composite laminates using fiber optic sensors," Smart Materials and Structures, vol. 11, pp. 279-287, 2002. [12]H. K. Kang, K. D. H. Kang, C. S. Hong, and C. G. Kim, "Simultaneous monitoring of strain and temperature during and after cure of unsymmetric composite laminate using fibre-optic sensors," Smart Materials and Structures, vol. 12, pp. 29-35, 2003. [13]E. Chehura, A. A. Skordos, C. C. Ye, S. W. James, I. K. Partridge, and R. P. Tatam, "Strain development in curing epoxy resin and glass fibre/epoxy composites monitored by fibre Bragg grating sensors in birefringent optical fibre," Smart Materials and Structures, vol. 14, pp. 354-362, 2005. [14]D. H. Kang, C. S. Hong, and C. G. Kim, "Characteristics of fiber Bragg grating sensors with various grating lengths embedded in composite materials," Key Engineering Materials, vol. 321-323 I, pp. 152-155, 2006. [15]S. Vacher, J. Molimard, and A. Vautrin, "Inverse analysis of embedded fiber bragg grating measurements," Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007, MA, United states, 2007, vol. 2, pp. 1105-1112. [16]Z. Wei, D. Song, Q. Zhao, and H. L. Cui, "High Pressure Sensor Based on Fiber Bragg Grating and Carbon Fiber Laminated Composite," Sensors Journal, IEEE, vol. 8, pp. 1615-1619, 2008. [17]T.L. Singal, Optical fiber communications: principles and applications. Cambridge University Press, 2016. [18]Z. Fang, K. Chin, R. Qu, and H. Cai, Fundamentals of optical fiber sensors. John Wiley & Sons, 2012. [19]E. Snitzer, "Cylindrical dielectric waveguide modes," JOSA, vol. 51, no. 5, pp. 491-498, 1961. [20]D. Gloge, "Weakly guiding fibers," Applied optics, vol. 10, no. 10, pp. 2252-2258, 1971.. [21]R. Gafsi and M. A. El-Sherif, "Analysis of induced-birefringence effects on fiber Bragg gratings," in Optical Fiber Technology, 2000, vol. 6, no. 3, pp. 299-323.. [22]J. F. Nye, Physical properties of crystals: their representation by tensors and matrices. Oxford university press, 1985. [23]T. Erdogan, "Fiber grating spectra," Journal of lightwave technology, vol. 15, no. 8, pp. 1277-1294, 1997. [24]K. O. Hill and G. Meltz, "Fiber Bragg grating technology fundamentals and overview," Journal of lightwave technology, vol. 15, no. 8, pp. 1263-1276, 1997. [25]T. Erdogan, "Cladding-mode resonances in short-and long-period fiber grating filters," JOSA A, vol. 14, no. 8, pp. 1760-1773, 1997. [26]H. A. Haus and W. Huang, "Coupled-mode theory," Proceedings of the IEEE, vol. 79, no. 10, pp. 1505-1518, 1991. [27]W.-P. Huang, "Coupled-mode theory for optical waveguides: an overview," JOSA A, vol. 11, no. 3, pp. 963-983, 1994. [28]H. Kogelnik and C. Shank, "Coupled‐wave theory of distributed feedback lasers," Journal of applied physics, vol. 43, no. 5, pp. 2327-2335, 1972. [29]H. Kogelnik, "Filter response of nonuniform almost‐periodic structures," Bell System Technical Journal, vol. 55, no. 1, pp. 109-126, 1976. [30]V. Mizrahi and J. E. Sipe, "Optical properties of photosensitive fiber phase gratings," Journal of lightwave technology, vol. 11, no. 10, pp. 1513-1517, 1993. [31]M. Matsuhara, K. Hill, and A. Watanabe, "Optical-waveguide filters: Synthesis," JOSA, vol. 65, no. 7, pp. 804-809, 1975. [32]M. Yamada and K. Sakuda, "Analysis of almost-periodic distributed feedback slab waveguides via a fundamental matrix approach," Applied optics, vol. 26, no. 16, pp. 3474-3478, 1987. [33]K. A. Winick and J. E. Roman, "Design of corrugated waveguide filters by Fourier-transform techniques," IEEE Journal of Quantum Electronics, vol. 26, no. 11, pp. 1918-1929, 1990.\. [34]P. Verly, J. Dobrowolski, W. J. Wild, and R. Burton, "Synthesis of high rejection filters with the Fourier transform method," Applied optics, vol. 28, no. 14, pp. 2864-2875, 1989. [35]J. Xia, A. K. Jordan, and J. A. Kong, "Electromagnetic inverse-scattering theory for inhomogeneous dielectrics: the local reflection model," JOSA A, vol. 11, no. 3, pp. 1081-1086, 1994. [36]K. A. Winick, "Effective-index method and coupled-mode theory for almost-periodic waveguide gratings: a comparison," Applied optics, vol. 31, no. 6, pp. 757-764, 1992. [37]J. L. Frolik and A. Yagle, "An asymmetric discrete-time approach for the design and analysis of periodic waveguide gratings," Journal of lightwave technology, vol. 13, no. 2, pp. 175-185, 1995. [38]P. S. J. Russell and T. Birks, "A Hamiltonian approach to propagation in chirped and non-uniform Bragg grating structures," 1995. [39]L. Poladian, "Variational technique for nonuniform gratings and distributed-feedback lasers," JOSA A, vol. 11, no. 6, pp. 1846-1853, 1994. [40]A. Othonos, "Fiber bragg gratings," Review of scientific instruments, vol. 68, no. 12, pp. 4309-4341, 1997. [41]G. W. C. Kaye and T. H. Laby, Tables of physical and chemical constants and some mathematical functions. Longmans, Green and Company, 1911 [42]S. P. Clark, Handbook of physical constants. Geological Society of America, 1966. [43]J. M. Menendez and J. A. Guemes, "Bragg-grating-based multiaxial strain sensing: its application to residual strain measurement in composite laminates," in Smart Structures and Materials 2000: Sensory Phenomena and Measurement Instrumentation for Smart Structures and Materials, 2000, vol. 3986: International Society for Optics and Photonics, pp. 271-281. [44]J. Guemes and J. Menendez, "Response of Bragg grating fiber-optic sensors when embedded in composite laminates," Composites science and technology, vol. 62, no. 7-8, pp. 959-966, 2002. [45]S. Agarwal and V. Mishra, "Characterization of fiber Bragg grating for maximum reflectivity based on modulation depth of refractive index," Optik, vol. 125, no. 18, pp. 5192-5195, 2014. [46]W. Bai et al., "Ultra-weak fiber Bragg grating sensing network coated with sensitive material for multi-parameter measurements," Sensors, vol. 17, no. 7, p. 1509, 2017. [47]ASTM 393-Standard test method for core shear properties of sandwich constructions by beam flexure. ASTM International, 2016
|