|
D.W.Hart, "introduction to power Electronics", Pretice Hall, 2004. [2]T.Yao, C.Nan, R.Ayyanar,"ANew Soft-Switching Topology for Switched Inductor High Gain Boost", IEEE Trans.Industry Applications, Vol.54, No.3, pp.2449-2458, 2018. [3] X.Zhang , L.Jiang , J.Deng , Siqi Li , Z.Chen, "Analysis and Design of a New Soft-Switching Boost Converter With a Coupled Inductor", IEEE Trans. Power Electronics, Vol.29, No.8, pp.4270-4277, 2014. [4] C. Suyong, S.Yujin,P.Sukin,and J. Hakgeun, "Digital current sharing method for parallel interleaved dc–dc converters using input ripple voltage", IEEE Trans. Ind. Informat.Vol. 8, No. 3, pp. 536–544, 2012. [5] H.L.Jou, J.J. Huang, J.C.Wu,K.D.Wu, "Novel Isolated Multilevel DC-DC Power Converter", IEEE Trans. Power Electronics,Vol. 31, No. 4, pp. 2690 – 2694, 2016. [6] I. A. Gowaid ,G. P. Adam , Ahmed M. Massoud , S.Ahmed , B. W. Williams, "Hybrid and Modular Multilevel Converter Designs for Isolated HVDC–DC Converters", IEEE Journal . Power Electronics,Vol. 6, No.1, pp188-202, 2017. [7]S.Kenzelmann, A.Rufer, D.Dujic, F.Canales ,Y.R.Novaes, "Isolated DC/DC Structure Based on Modular Multilevel Converter", IEEE Trans. Power Electronics,Vol.30, No.1, pp89-98, 2015. [8]江炫樟, 電力電子學, 全華圖書股份有限公司, 2003. [9]潘添福, 電力電子學, 高力圖書股份有限公司, 2008. [10]Liu.L, L. Yan, Liu.L, "Analysis of Output Voltage Ripple of Buck DC-DC converter and its design", IEEE Trans. Power Electronics, Vol.2, No.10, pp112-115, 2009. [11] N.Boujelben, F.Masmoudi, M.Djemel ,N.Derbel," Design and comparison of quadratic boost and double cascade boost converters with boost converter",IEEE Trans.Signals & Devices,Vol.15, No.3, pp.245-252,2017. [12]S.L.Liu, J.Liu , H.Mao, "Analysis and Design of Boost DC-DC Converters for Intrinsic Safety", IEEE Trans. Power Electronics, Vol.21, No.8, pp.1-6, 2006. [13]A.Thiyagarajan , S. G. P.Kumar ,A.Nandini, "Analysis and comparison of conventional and interleaved DC/DC boost converter", IEEE Trans.Engineering and Technology, Vol.3, No.6, pp.198-205, 2014. [14]王順忠, 電力電子學, 東華書局, 2004. [15]E.Babaei , M.E.S Mahmoodieh , H.M Mahery,"Operational Modes and Output-Voltage-Ripple Analysis and Design Considerations of Buck–Boost DC–DC Converters”,IEEE Trans. industrial Electronics, Vol.12, No.1, pp381-391, 2012. [16]H.Givi , E.Farjah , T.Ghanbari, "Switch and Diode Fault Diagnosis in Nonisolated DC–DC Converters Using Diode Voltage Signature", IEEE Trans. industrial Electronics, Vol.65, No.2, pp1606-1615, 2017. [17] B.M.Reddy, P.Samuel, "A comparative analysis of non-isolated bi-directional dc-dc converters", IEEE Trans. Power Electronics, Vol.13, No.4 , pp1-6, 2016. [18] S.Sobhan, "Comparative Assessment of Non-Isolated DC-DC Converters Combined with Passive Ripple Cancelling Circuit" ,IEEE Trans. Electrical and Computer Engineering ,Vol.46, No.3,pp357-360 ,2018. [19] A.Kumar , P.Sensarma, "Inner Loop Stability of Peak Current Controlled Cuk and SEPIC Converters", IEEE Trans. Power Electronics, Vol.39, No.8, pp.1-6, 2018. [20]歐勝源, 電力電子學, 東華書局, 2011. [21] J. Akash , V. Gomathi , S. Ajith Kumar , V. Chamundeeswari, "Comparative Analysis of Negative Luo Converter and Cuk Converter for Harmonic Reduction" , IEEE Trans. Signal Processing,Vol.21, No.5, pp.532-536, 2018.
|