[1]K. K. Chawla and K. L. Edwards, "Fibrous Reinforcements for Composites: Overview," in Reference Module in Materials Science and Materials Engineering: Elsevier, 2016.
[2]柯澤豪. 許明發, 劉顯光and 郭文雄, 複合材料入門. 中華民國尖端科技材料協會, 2005
[3]A. Costa, E. Botelho, M. Costa, N. Narita, and J. Tarpani, "A Review of Welding Technologies for Thermoplastic Composites in Aerospace Applications," Journal of Aerospace Technology & Management, vol. 4, pp. 255-265, 09/01 2012.
[4]C. Nogueira, J. Faulstich de Paiva, and M. C. Rezende, "Effect of the interfacial adhesion on the tensile and impact properties of carbon fiber reinforced polypropylene matrices," Materials Research-ibero-american Journal of Materials, vol. 8, 03/01 2005.
[5]A. Patel, O. Kravchenko, and I. Manas-Zloczower, "Effect of Curing Rate on the Microstructure and Macroscopic Properties of Epoxy Fiberglass Composites," Polymers, vol. 10, p. 125, 01/27 2018.
[6]A. R. Offringa, "Thermoplastic composites—rapid processing applications," Composites Part A: Applied Science and Manufacturing, vol. 27, no. 4, pp. 329-336, 1996.
[7]W. J. Cantwell and J. Morton, "The impact resistance of composite materials — a review," Composites, vol. 22, no. 5, pp. 347-362, 1991/09/01/ 1991.
[8]R. P. Singh, M. Zhang, and D. Chan, "Toughening of a brittle thermosetting polymer: Effects of reinforcement particle size and volume fraction," Journal of Materials Science, vol. 37, no. 4, pp. 781-788, 2002/02/01 2002.
[9]R. Jeencham, N. Suppakarn, and K. Jarukumjorn, "Effect of flame retardants on flame retardant, mechanical, and thermal properties of sisal fiber/polypropylene composites," Composites Part B: Engineering, vol. 56, pp. 249-253, 2014/01/01/ 2014.
[10]S. K. Bhudolia, G. Gohel, K. F. Leong, and S. C. Joshi, "Damping, impact and flexural performance of novel carbon/Elium® thermoplastic tubular composites," Composites Part B: Engineering, vol. 203, p. 108480, 2020/12/15/ 2020.
[11]S. Boria, A. Scattina, and G. Belingardi, "Impact behavior of a fully thermoplastic composite," Composite Structures, vol. 167, pp. 63-75, 2017/05/01/ 2017.
[12]S. Z. H. Shah et al., "Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading," International Journal of Mechanical Sciences, vol. 189, p. 105984, 2021/01/01/ 2021.
[13]P. J. Hogg, "Toughening of thermosetting composites with thermoplastic fibres," Materials Science and Engineering: A, vol. 412, no. 1, pp. 97-103, 2005/12/05/ 2005.
[14]C. Sonnenfeld, H. Mendil-Jakani, R. Agogué, P. Nunez, and P. Beauchêne, "Thermoplastic/thermoset multilayer composites: A way to improve the impact damage tolerance of thermosetting resin matrix composites," Composite Structures, vol. 171, pp. 298-305, 2017/07/01/ 2017.
[15]M. Yasaee, I. P. Bond, R. S. Trask, and E. S. Greenhalgh, "Damage control using discrete thermoplastic film inserts," Composites Part A: Applied Science and Manufacturing, vol. 43, no. 6, pp. 978-989, 2012/06/01/ 2012.
[16]B. Vieille, V. M. Casado, and C. Bouvet, "About the impact behavior of woven-ply carbon fiber-reinforced thermoplastic- and thermosetting-composites: A comparative study," Composite Structures, vol. 101, pp. 9-21, 2013/07/01/ 2013.
[17]H. Tuo, Z. Lu, X. Ma, J. Xing, and C. Zhang, "Damage and failure mechanism of thin composite laminates under low-velocity impact and compression-after-impact loading conditions," Composites Part B: Engineering, vol. 163, pp. 642-654, 2019/04/15/ 2019.
[18]D. Tobalina-Baldeon, F. Sanz-Adan, M. A. Martinez-Calvo, and J. Santamaría-Pena, "Dynamic Tensile Stress-Compressive Stress Behavior of Thermoplastic Matrix Composite Materials Reinforced with Continuous Fiber for Automotive Damping and Anti-Vibration Structural Elements," Materials, vol. 13, no. 1, 2020.
[19]纖維複合材料, "國立成功科技大學航空太空工程學系."
[20]黃俊欽, "塑膠材料分類."
[21]張志揚, "以碳氣凝膠補強纖維疊層板之機械特性與脫層研究," 碩士論文, 模具工程系, 國立高雄應用科技大學, 高雄市, 2015.[22]W. Grouve and R. Akkerman, "Consolidation process model for film stacking glass/PPS laminates," Plastics, Rubber and Composites, vol. 39, 06/01 2010.
[23]王豐翔, "以奈米強化材補強碳纖維複合材料之衝擊性能研究," 碩士, 模具工程系, 國立高雄應用科技大學, 高雄市, 2016.[24]O. Khayal, "Mechanical Vibrations (2)," 2017.
[25]A. D. Nashif, D. I. G. Jones, and J. P. Henderson, "Vibration damping," (in English), 1985.
[26]黃耀賢, "以塊狀短纖複合材料修補纖維疊層板之研究," 博士論文, 模具工程系, 國立高雄應用科技大學, 高雄市, 2018.[27]A. D3039, "Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials," ASTM International. doi: 10.1520/D3039_D3039M-14.
[28]A. D790, "Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials," ASTM International. doi: 10.1520/D790-17.
[29]A. D6641, "Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture," ASTM International. doi: 10.1520/D6641_D6641M-16.
[30]A. D7136, "Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event," ASTM International. doi: 10.1520/D7136_D7136M-15.
[31]A. D7137, "Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates," ASTM International. doi: 10.1520/D7137_D7137M-12.
[32]A. E756, "Standard Test Method for Measuring Vibration-Damping Properties of Materials," ASTM International. doi: 10.1520/E756-05.