[1]黃安斌,2010,橋墩沖刷之高科技即時監測系統研發、整合與應用,國立交通大學工學院防災工程研究中心摘要.
[2]單秋成,2014,鋼索破壞監測系統之開發,國立台灣大學機械工程研究所2014海峽兩岸破壞科學與材料試驗學術會議摘要.
[3] Rita Trovão Pereira de Lima,2017,Development of Embedded Fiber Bragg Grating Sensors using 3D Printing Technique, Departamet of Physics and Astronomy Inte-grated Master’s in Engineering Physics, pp. 21.
[4]J.R.C. Dizon, A.H. Espera, Q.Y. Chen, R,2017,AdvinculaMechanical characterization of 3D-printed polymers Addit Manuf, pp. 44-67
[5]E. Macdonald, R. Salas, D. Espalin, M. Perez, E. Aguilera, D. Muse, R.B. , 2014, Wicker3D Printing for the Rapid Prototyping of Structural Electronics Ieee Access, pp. 234-242
[6]S.E. Bakarich, R. Gorkin, M.I.H. Panhuis, 2014, SpinksThree-Dimensional Printing Fiber Reinforced Hydrogel Composites Acs Appl Mater Inter, pp. 1599-1600
[7]J.L. Ifkovits, J.A., 2007, BurdickReview: Photopolymerizable and degradable biomaterials for tissue engineering applications Tissue Eng, pp. 2369-2385
[8]S.J. Kalita,S. Bose,H.L. Hosick, 2003, BandyopadhyayDevelopment of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling Mat Sci Eng C-Bio S,pp. 611-620
[9]F.P.W. Melchels, J. Feijen, D.W. Grijpma, 2010, review on stereolithography and its applications in biomedical engineering Biomaterials, pp. 6121-6130
[10]V.B. Morris, S. Nimbalkar, M. Younesi, P. McClellan, O. Akkus, 2017, Mechanical PropertiesCytocompatibility and Manufacturability of Chitosan:PEGD Hybrid-Gel Scaffolds by Stereolithography Annals of Biomedical Engineering, pp. 286-296
[11]S.V. Murphy, 2014, Atala3D bioprinting of tissues and organs Nat Biotechnol, pp. 773-785
[12]Rengie,Mehndiratta,H.von Tengg-Kobligk, C.M. Zechmann, R.Unterhinninghofen, H.U. Kauczor, F.L. Giesel,2010,3D printing based on imaging data: review of medical applications Int J Comput Ass Rad, pp. 335-341
[13]G.H.Wu,S.H.Hsu,2015, Review: Polymeric-Based 3D Printing for Tissue Engineering vol 35,pp 285
[14]R. Liu, Z. Wang, T. Sparks, F. Liou, J. NewkirkAerospace,2017, applications of laser additive manufacturing With Pub Serv Elect, pp. 351-371
[15]R. Melnikova, A. Ehrmann, K. Finsterbusch ,2014,3D printing of textile-based structures by Fused Deposition Modelling (FDM) with different polymer materials Iop Conf Ser-Mat Sci,pp.62
[16]L.Pruitt,L.,1998,Bailey Factors affecting near-threshold fatigue crack propagation behavior of orthopedic grade ultra high molecular weight polyethylene Polymer, 39 (8-9),pp. 1545-1553
[17]J.A. Sauer, M. Hara,1990, Effect of Molecular Variables on Crazing and Fatigue of Polymers Crazing in Polymers, pp. 69-118
[18]K. O. Hill, Y. Fujii, D. C. Johnson, and B. S. Kawasaki,1978, Photosensitivity in optical fiber waveguides: Application to reflection filter fabrication, Applied Physics Letters 32 , Canada, pp. 647-649.
[19] B. S. Kawasaki, K. O. Hill, D. C. Johnson, and Y. Fujii, 1987,Narrow-band Bragg reflectors in optical fibers, Optics Letters 3 , Canada, pp. 66-68.
[20] D. K. W. Lam, and B. K. Garside, 1981,Characterization of single-mode optical fiber filters, Applied Optics 20 , Canada, pp. 440-445.
[21]G. Meltz, W. W. Morey, and W. H. Glenn,1989, Formation of Bragg gratings in optical fibers by a transverse holographic method, Optics Letters 14, Canada, pp. 823-825
[22]陳信傑,2019,多波長光纖雷射於水下震動定位系統之研究,國立虎尾科技大學光電工程系碩士論文,pp. 10-12[23]高聖傑,“光纖光柵壓力感測器之研發”,國立交通大學土木工程學系碩士論文,pp.68-69(2006)[24]嚴建昌,2012,利用布拉格光纖光柵設計與製作地震感測系統,國立勤益科技大學電子工程系碩士論文,pp. 32.[25]陳建成,2003,布拉格光纖光柵振動感測器設計,國立中山大學電機工程學系碩士論文,pp. 98.