[1]鄭釗瀚,多模穴模組流道系統之流動平衡分析,吳鳳科技大學,光機電暨材料研究所,2012碩士論文。[2]孫雨涵,探討共射成型條件對多模穴料量平衡之影響,遠東科技大學,電腦應用工程研究所,2012碩士論文。[3]鍾榮輝,多模穴相異成品之流動平衡分析探討與實例驗証,國立高雄應用科技大學,模具工程系,2012碩士論文。[4]黃新智,離子化樹脂材料應用於高爾夫球多模穴射出成形之研究,國立高雄應用科技大學,模具工程系在職專班,2014碩士論文。[5]楊偉聖,流動平衡元件應用於多模穴射出成型之製程分析,吳鳳科技大學,光機電暨材料研究所,2013碩士論文。[6]沈晏德,含纖維材料對射出成型製程之影響分析,吳鳳科技大學,光機電暨材料研究所,2013碩士論文。[7]郭盈瑩,一模多穴的滑快模具設計與射出成形分析,國立高雄應用科技大學,模具工程系,2017碩士論文。[8]林顯章,多模穴光學模具之設計與優化,國立勤益科技大學,2012碩士論文。
[9]Li Q.Tang, Constantin Chassapis and Souran Manoochehri, ”Optimal cooling system design for multi-cavity injection molding”, Finite Elements in Analysis and Design, Vol.26(3), pp.229-251, 1997.
[10]S.-Y. Yang, S.-C. Nian, S.-T. Huang and Y.-J. Weng, “A study on the micro-injection molding of multi-cavity ultra-thin parts”, Polymers for Advances Technologies, Vol.22(6), pp.891-902, 2011.
[11]Tae-Il Seo, Byeong-Uk Song and Jeong-Won Lee, “Design and fabrication of multi-cavity
[12]injection mold using hot runnersand direct edge gates”, Journal of Mechanical Engineering Science, Vol.228(15), pp.2790-2798, 2014.
[13]Krzysztof Wilczynski and Przemysław Narowsk, “A Strategy for Problem Solving of Filling Imbalance in Geometrically Balanced Injection Molds”, Polymers, Vol.12, pp.805, 2020. (doi:10.3390/polym12040805)
[14]陳信瑋、蔡昶義、黃俊欽,多模穴塑膠射出成形流動平衡探討。
[15]Plastics Hall of Fame 塑料名人堂
[16]塑料PA66-尼龍66特性及應用 網址:https://kknews.cc/zh-tw/news/ygxey2n.html
[17]MeltFlipper® 熔膠管理與控制技術 網址:http://www.caemolding.org/cmm/meltflipper/
[18]模具設計標準規範,壹讀,Thursday, Jul 8, 2021