[1] 紀翔瀛,2019,臺灣扣件產業打造智慧工廠的機會與展望,經濟部技術處。
[2] 中華民國專利字號,”M513279”.
[3] Sadegh Maleki, 2017, “Withdrawal resistance of screws in structural composite lumber made of poplar (Populus deltoides)”, Construction and Building Materials, vol.142, pp.499-505.
[4] Reinhard Brandner, 2019, “Performance of axially-loaded self-tapping screws in hardwood: Properties and design”, Engineering Structures, vol.188, pp.677-699.
[5] Andreas Ringhofer, 2017, “Axially loaded self-tapping screws in solid timber and laminated timber products”, Graz University of Technology, Dissertation.
[6] Kiho Jung, 2019, “Drive-In Torque for Self-Tapping Screws into Timber”, Construction Materials.
[7] Bo-Han Xu, Abdelhamid Bouchair, M. Taazount, Patrick Racher, 2012, “Numerical simulation of embedding strength of glued laminated timber for dowel-type fasteners”, Journal of Wood Science 59(1).
[8] 黃志中,2012,複合螺紋之螺絲旋入扭力功能研究,國立高雄應用科技大學 模具工程系,碩士論文。[9] G. Dinger, 2015, “Dynamic modeling and simulation of the screwing behavior of thread forming screws”, Journal of Manufacturing Processes, vol.20, pp.374-379.
[10] Jin-Kyu Song, 2007, “The Compressive Stress-strain Relationship of Timber”, Chonnam National University, Department of Architectural Engineering.
[11] ISO STANDARDS HANDBOOK, 2009,“FATSNER AND SCREW THREAD”, Fifth Edition 2001-Updated 2009, pp.321、1341-1419.
[12] 紀翔瀛,2015,從低碳鋼到高合金鋼-扣件材料轉型之路,金屬工業研究發展中心。
[13] 王維銘,2020,螺栓‧螺絲‧螺帽扣件之旋緊鎖固,Fastener World。
[14] 王松永,2018,木材物理學:物理性質篇,新學林出版社。
[15] 蔡如藩,1985,木材力學性質,徐氏基金會出版。
[16] CNS 452,2013,木材含水率試驗法,中華民國國家標準-台灣。
[17] 蔡攀鰲,1986,土木材料試驗,科學技術叢書,三民書局。
[18] American Institute of Timber Construction, 2012,“Timber Construction Manual”, pp.42-56.
[19] ASTM D198-15, 2015,“Standard Test Methods of Static Tests of Lumber in Structural Sizes”, ASTM International.
[20] ISO 8375, 2017,“Timber structures - Glued laminated timber - Test methods for determination of physical and mechanical properties”, International Organization for Standardization.
[21] J. Bodig & B.A. Jayne, 1993, “Mechanics of Wood and Wood Composites”, Krieger Publishing, pp.291-305.
[22] 許燕忠,2000,孔型壓延加工之有限元素解析,國立中山大學,碩士論文。[23] DEFORM,2017, “DEFORM v11.0.2 System Documentation”, Scientific Forming Technologies Corporation.
[24] The Engineering Tool Box, “Friction and Friction Coefficients”, The Engineering Tool Box.
[25]Kobayashi, Oh, Altan, “Metal Forming Processes”, Advanced Technology of Plasticity, Vol.1, p.479.
[26] ISO 17754, “Timber structures -Test methods - Torsional resistance of driving in
Screws”, International Organization for Standardization.
[27]EN 15737, “TIMBER STRUCTURES - TEST METHODS - TORSIONAL RESISTANCE OF DRIVING IN SCREWS”, European Committee for Standardization.
[28]EN 1382, “TIMBER STRUCTURES - TEST METHODS - WITHDRAWAL CAPACITY OF TIMBER FASTENERS” , European Committee for Standardization.
[29]ASTM D1761, “Standard Test Methods for Mechanical Fasteners in Wood”, ASTM International.
[30] Vassil Jivkov, 2017, “Withdrawal Capacity of Screws and Confirmat into Different Wood-based Panels”, THE XXVIIITH INTERNATIONAL CONFERENCE RESEARCH FOR FURNITURE INDUSTRY.