|
[1] Hwang Yunn-Lin, Shabana A. A., "Dynamics of flexible multibody space
cranes using recursive projection methods," Vol. 45, No. 3, pp. 549-563,
1992.
[2] Hwang Yunn-Lin, "A new approach for dynamic analysis of flexible manipulator
systems ," DOI:10.1016/j.ijnonlinmec.2004.12.001, 2005.
[3] Qu Bao Zhang, Lu Bi Hong, Huang Jian Song, Liu Yu, "Rigid-Flexible Hybrid
MBD Based Modeling and Simulation Method for Coupler Mechanism," Advanced
Materials Thesis Vol. 655-657 pp. 416-420, 2013.
[4] Hwang Yunn-Lin, Cheng Jung-Kuang, Truong Van-Thuan, “Dynamic Analysis and
Control of Industrial Robotic Manipulators,” Journal of Applied Mechanics
and Materials, Vol. 883, pp. 30-36, 2018.
[5] Berkowitz A., "Estimation of loads causing fatigue failures in accident
investigations," Engineering Failure Analysis, Vol. 2, No. 3, pp. 215-226,
1995.
[6] Schieble W. O., "Multibody systems handbook," in Multibody Systems Handbook
Berlin Heidelberg: Springer, 1990.
[7] Rubinstein D., Hitson R., "A detailed multi-body model for dynamic
simulation of off-road tracked vehicles," Journal of Terramechanics, Vol.
41, No. 2-3, pp. 163-173, 2004.
[8] Zhang B. H., Lu Y., Qu B. Z., "Thesis on RecurDyn Based Simulation Method
for the Brake Shoe Eccentric Wear in Railway Freight Cars," Key Engineering
Materials Vol. 522, pp. 467-471, 2012.
[9] Chen W., Zhan J., Zhou H., "Modeling and Simulation of Adaptive Surface
Tracked Vehicle Based on RecurDyn," Open Journal of Modelling and
Simulation, Vol. 1, No. 4, pp. 37-41, 2013.
[10] Hwang Yunn-Lin, “Analysis of mechanical vibrations and forces using
amalgamated decoupling method in multibody mechanical systems,”
International Journal of Communications in Numerical Methods in
Engineering, Vol. 24, No. 11, pp. 1553-1566, 2008.
[11] Eddie C., "Soil-tire/track interaction-current and future thesis needs,"
Journal of Terramechanics, Vol. 30, No. 5, pp. 317-323, 1993.
[12] Lai X., He H., Lai Q., “Computational prediction and experimental
validation of revolute joint clearance wear in the low-velocity planar
mechanism,” Mechanical Systems and Signal Processing, Vol. 85, pp. 963-976,
2017,
[13] Chan, Nyein, Oo Than Zaw, Hlaing Myo San, "Design and Structural Analysis
of 3 Axis CNC Milling Machine Table," International Journal of Trend in
Scientific Thesis and Development, Vol 3, pp.943-948, 2019.
[14] Park K., Hoe S. J., Kang D. O., "Robust design optimization of suspension
system considering steering pull reduction," International Journal of
Automotive Technology, Vol. 14, No. 6, pp. 927-933, 2013.
[15] Hwang Yunn-Lin, Hwang Shen-Jenn, “Dynamic analysis and control of multibody
systems using nonlinear combination methods,” International Journal for
Numerical Methods in Biomedical Engineering, Vol. 27, Issue 10, pp. 1583-
1610, 2011.
[16] Rodríguez S. A., Quilcene F. A., Coronado J., "Investigation of the Failure
of an Automobile Torsion Bar," Journal of Failure Analysis and Prevention,
Vol. 10, No. 1, pp. 11-17, 2010.
[17] Truong Van-Thuan, Hwang Yunn-Lin, “A New Approach for Dynamic Analysis and
Driving Control of CNC Machine Tool,” Journal of the Chinese Society of
Mechanical Engineers, Vol. 38, No. 2, pp. 165-171, 2017.
[18] Haug E. J., Wu S. C., Yang S. M., "Dynamics of mechanical systems with
Coulomb friction, stiction, impact and constraint addition-deletion—I
theory," Mechanism and Machine Theory, Vol. 21, No. 5, pp. 401-406. 1986
[19] Mellick P., Horcher J., "A Framework for Modeling and Simulation of Tracked
Vehicles of High Mobility," ASME 2011 International Design Engineering
Technical Conferences and Computers and Information in Engineering
Conference, pp. 667-673, 2011.
[20] Wu Fuzhong, "CNC Milling Machine Spindle Characteristics Analysis by FEM,"
2010 International Conference on Intelligent Computation Technology and
Automation, pp. 954-957, Doi: 10.1109/ICICTA.2010.396, 2010
[21] Nawaz S., Zia A., "Systematic errors identification in the structure of CNC
machines due to elastic deformations," 14th International Bhurban
Conference on Applied Sciences and Technology (IBCAST2017), pp. 143-147,
Doi: 10.1109/IBCAST.2017.7868047, 2017
[22] Lee A. W., Wong S. K., Singh R. S., Brown E. R., "Measurement and FEM
modeling of a reconfigurable-patch antenna for use in the wideband
gapfiller satellite system," IEEE Antennas and Propagation Society
International Symposium. Digest. Held in conjunction with: USNC/CNC/URSI
North American Radio Sci. Meeting (Cat. No.03CH37450), pp. 379-382 vol.1,
Doi: 10.1109/APS.2003.1217476, 2003,
[23] Shao J., Yang X., Zhou L., Li H., Zhang Y., Jiang H. D., "Numerical
Simulation of Integrated Deformation of Heavy Hydrostatic Thrust Bearing
and Experimental Thesis,” International Conference on Intelligent Human-
Machine Systems and Cybernetics, pp. 45-48, Doi: 10.1109/IHMSC.2009.137,
2009
[24] Lou Zheng, Jin Lian-Ming, "High-order finite-element analysis of
electromagnetic scattering from periodic structures," IEEE Antennas and
Propagation Society International Symposium, pp. 153-156, Doi:
10.1109/APS.2003.1219201, 2003
[25] Sabirov F. S., Gilovoj L. Y., Bogan A. N., Yakhutlov M. M., Nartyzhev R. M.
"Application of CAE for Modeling the Parametric Failure of the Spindle Due
to Rigidity by Bearing Wear," IEEE International Conference, pp. 471-473,
Doi: 10.1109/ITMQIS.2018.8524941, 2018
[26] Prado Y., Valiño G., Blanco D., Suárez C. M., Álvarez B. J., "Models for
stiffness characterization of the spindle-chuck system in a CNC lathe for
prediction of deflections in CAPP," IEEE 15th Conference on Emerging
Technologies & Factory Automation, pp. 1-7, 2010.
[27] Lian G., Li H., Ban F., Chen B., "Optimization Design of Cogging Torque and
Back EMF Waveform for PMSM,” IEEE International Conference on Applied
Superconductivity and Electromagnetic Devices (ASEMD), pp. 1-2, Doi:
10.1109/ASEMD.2018.8558967, 2018
[28] Kamgaing T., Ramahi O. M., "Development and application of physics-based
compact models for high-impedance electromagnetic surfaces integrated in a
power plane configuration," IEEE Antennas and Propagation Society
International Symposium, Vol. 4, pp. 442-445, 2003.
[29] Zhu H., Wang B., Chen W., "Dynamic performance analysis of truss robot
based on RecurDyn and experimental thesis," (ACIRS), pp. 31-35, Doi:
10.1109/ACIRS.2016.7556183, 2016
[30] Paniti I., Paróczi A., "Design and modeling of integrated Hall-effect
sensor based on-line thickness measurement device for incremental sheet
forming processes," IEEE/ASME, pp. 297-302, Doi: 10.1109/AIM.2011.6027146,
2011.
|