[1]H. Narahara, S. Takeshita, H. Fukumaru, H. Koresawa, and H. Suzuki, “Permeability Performance on Porous Structure of Injection Mold Fabricated by Metal Laser Sintering Combined with High Speed Milling,” International Journal of Automation Technology, vol. 6, no. 5, pp. 576–583, Sep. 2012.
[2]L. Chong, S. Ramakrishna, and S. Singh, “A review of digital manufacturing-based hybrid additive manufacturing processes,” The International Journal of Advanced Manufacturing Technology, vol. 95, no. 5, pp. 2281–2300, 2018, doi: 10.1007/s00170-017-1345-3
[3]Brecht Van Hooreweder, Yanni Apers, Karel Lietaert, Jean-Pierre Kruth, ”Improving the fatigue performance of porous metallic biomaterials produced by Selective Laser Melting,” ACTA Biomaterialia ,Vol.47, 1 2017, pp. 193-202
[4]Molders_World_Catalog.pdf, Molder’s World, Inc., https://moldersworld.com/wpcontent/uploads/2016/07/MoldersWorldCatalog.pdf, Last Accessed: Mar. 06, 2021.
[5]T. Muthuramalingam, “Measuring the influence of discharge energy on white layer thickness in electrical discharge machining process,” Measurement, vol.131, pp.694-700, Jan. 2019, doi:10.1016/ j.measurement.2018.09.038.
[6]E. Uhlmann and D. C. Domingos, “Development and Optimization of the Die-Sinking EDM-Technology for Machining the Nickel-based Alloy MAR-M247 for Turbine Components,” Procedia CIRP, vol. 6, pp. 180–185, Jan. 2013, doi: 10.1016/j.procir.2013.03.102.
[7]G. Li, W. Natsu, and Z. Yu, “Study on quantitative estimation of bubble behavior in micro hole drilling with EDM,” Int. J. Mach. Tools Manuf., vol. 146, 103437, 2019,doi:10.1016/j.ijmachtools.2019.103437.
[8]呂笠瑋,”放電加工法對積層透氣模具鋼之表面處理與對照超聲輔助線削法之比較研究”, 國立高雄科技大學, 模具工程系, 碩士論文, 2021.[9]Mustafa Kurt, O. Saban Kamber, Yusuf Kaynak, Gurcan Atakok, Oguz Girit, ”Experimental investigation of plastic injection molding: Assessment of the effects of cavity pressure and mold temperature on the quality of the final products,” Materials & Design, Vol. 30(8), September 2009, pp.3217-3224
[10]J. Shoemaker, Chapters 1-3, Moldflow Design Guide. Carl Hanser Verlag, Munich, 2006.
[11]R.A. Malloy, Chapters 1; Plastic Part Design for Injection Molding. 2nd Ed. Hanser Publishers, 1994.
[12]S. Hashemi, Y. Lepessova, ” Temperature and weld line effects on tensile properties of injection moulded short glass fiber PC/ABS polymer composite.” Journal of Materials Science. 42, 2007, 2652.
[13]H. Zhou, D. Li, ”Computer evaluation of weld lines in injection molded
Parts,” Journal of Reinforced Plastics and Composites. Comp. 24, 2005, 315.
[14]Y. Zhou, P.K. Mallick, ”Effects of melt temperature and hold pressure
on the tensile and fatigue properties of an injection molded talcfilled polypropylene,” Polymer Engineering & Science. 45 (2005) 755.
[15]張永彥,第5章及第11章,塑膠模具設計學(第8版),全華圖書,2016.07
[16]International Mold Steel, Inc. Data Sheet of Porcerax II, http://www.imsteel.com/plastic_mold_steels/porcerax/porcerax_home.htm, Last Accessed: May. 16, 2021.
[17]張祐豪,”塑膠模具流道的設計與分析”, 國立虎尾科技大學, 機械與電腦輔助工程系碩士班在職專班, 碩士論文, 2022.[18]林仁傑,”塑膠模具設計架構之研究-以手機產品為例”, 逢甲大學, 經營管理碩士在職專班, 碩士論文, 2010.[19]Jian Zhou, Lijun Li, Yihua Hu, “Plastic mold design of top-cover of out-shell of mouse based on CAE,” Procedia Engineering, Volume 15, Pages 4441-4445, 2011
[20]A.Cunha, A.Marques, F.S.Silva, “420 stainless steel-Cu parts fabricated using 3D Multi-Material Laser Powder Bed Fusion: a new solution for plastic injection moulds,” materialstoday communications, Volume 32, 103852, August 2022
[21]Lars Bogaerts, Matthias Faes, Jolien Bergen, Jens Cloots, “Influence of thermo-mechanical loads on the lifetime of plastic inserts for
injection moulds produced via additive manufacturing,” Procedia CIRP, Volume 96, Pages 109-114, 2021