[1] A. Zhecheva, W. Sha, S. Malinov, A. Long, Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods, Surf. Coat. Technol., 200 (2005) 2192-2207.
[2] R. Yang, C. Zhu, Q. Wei, Z. Du, Investigations on structural, elastic, thermodynamic and electronic properties of TiN, Ti2N and Ti3N2 under high pressure by first-principles, Journal of Physics and Chemistry of Solids, 98 (2016) 10-19.
[3] S. Van Vrekhem, K. Vloebergh, M. Asadian, C. Vercruysse, H. Declercq, A. Van Tongel, L. De Wilde, N. De Geyter, R. Morent, Improving the surface properties of an UHMWPE shoulder implant with an atmospheric pressure plasma jet, Sci Rep, 8 (2018) 4720.
[4] D.P. Subedi, U.M. Joshi, C.S. Wong, Dielectric Barrier Discharge (DBD) Plasmas and Their Applications, in: Plasma Science and Technology for Emerging Economies, 2017, pp. 693-737.
[5] 楊偉勛,以常壓電漿製程製備氮化鉻薄膜,國立高雄科技大學化學工程與材料工程系碩士學位論文(2019)[6] 吳智祥,以常壓電漿製程在鋁合金表面製備氮化鋁薄膜之研究,國立高雄科技大學化學工程與材料工程系碩士學位論文(2021)[7] 夏宗瑜,以常壓電漿製程製備三元氮化鋁鉻薄膜及其特性分析,國立高雄科技大學化學工程與材料工程系碩士學位論文(2021)[8] F.M. El-Hossary, N.Z. Negm, A.M. Abd El-Rahman, M. Raaif, A.A. Seleem, A.A.A. El-Moula, Tribo-mechanical and electrochemical properties of plasma nitriding titanium, Surf. Coat. Technol., 276 (2015) 658-667.
[9] K. Ren, W. Yue, H.Y. Zhang, Surface modification of Ti6Al4V based on ultrasonic surface rolling processing and plasma nitriding for enhanced bone regeneration, Surf. Coat. Technol., 349 (2018) 602-610.
[10] H.Y. Shen, L. Wang, Formation, tribological and corrosion properties of thicker Ti-N layer produced by plasma nitriding of titanium in a N2-NH3 mixture gas, Surf. Coat. Technol., 393 (2020) 8.
[11] M. Hassan, A. Qayyum, R. Ahmad, G. Murtaza, M. Zakaullah, Nitriding of titanium by using an ion beam delivered by a plasma focus, J. Phys. D-Appl. Phys., 40 (2007) 769-777.
[12] S.D. Vales, E.A.O. Becerra, P.P. Brito, R. Droppa, J.L. Garcia, F. Alvarez, H.C. Pinto, Effect of Low Temperature Nitriding of 100Cr6 Substrates on TiN Coatings Deposited by IBAD, Mater. Res.-Ibero-am. J. Mater., 18 (2015) 54-58.
[13] L. Briguente, J. Onoro, F.P. Briguente, F.A. Resende, J.L. dos Reis, D.A.P. Reis, A.C. de Oliveira, The Influence of Laser Nitriding on Creep Behavior of Ti-4Al-4V Alloy with Widmanstatten Microstructure, Metals, 9 (2019) 10.
[14] J.C. Guo, Y. Shi, C.K. Li, G. Zhang, Investigation of nitrogen ionization state and its effect on the nitride layer during fiber laser gas nitriding of Ti-6Al-4V alloy, Surf. Coat. Technol., 418 (2021) 8.
[15] M. Yoshida, R. Ichiki, N. Utsumi, Surface Hardening of Titanium Using Gas Nitriding, Int. J. Precis. Eng. Manuf., 14 (2013) 971-976.
[16] D. Tobola, J. Morgiel, L. Maj, TEM analysis of surface layer of Ti-6Al-4V ELI alloy after slide burnishing and low-temperature gas nitriding, Appl. Surf. Sci., 515 (2020) 11.
[17] 蔡博丞,濺鍍法中以空氣做為反應性氣體製備TiNxOy薄膜及其應用研究,國立中興大學材料科學與工程學系碩士學位論文(2016)[18] W.Y. He, K.L. Ai, C.H. Jiang, Y.Y. Li, X.F. Song, L.H. Lu, Plasmonic titanium nitride nanoparticles for in vivo photoacoustic tomography imaging and photothermal cancer therapy, Biomaterials, 132 (2017) 37-47.
[19] M. Rizwan, A. Ahmad, K.M. Deen, W. Haider, Electrochemical behavior and biological response of Mesenchymal Stem Cells on cp-Ti after N-ions implantation, Appl. Surf. Sci., 320 (2014) 718-724.