[1]葉席吟,2015,生醫材料領域之國際專利趨勢與技術發展分析,科技政策研究與資訊中心。
[2]國家發展委員會,2014,中華國人口推計(103年至150年)。
[3]M. Majewski, H. Susanne, S. Klaus, 2006, “Epidemiology of Athletic Knee Injuries: A 10-year Study”, The Knee, vol. 13, pp. 184-188.
[4]R.D. Scott, T.S. Thornhill, 1994, “Posterior Cruciate Supplementing Total Knee Replacement Using Conforming Inserts and Cruciate Recession: Effect on Range of Motion and Radiolucent Lines”, Clinical Orthopaedics and Related Research, vol. 309, pp. 146-149.
[5]高常有、馬列,2016,醫用高分子材料,北京:化學工業出版社。
[6]Available at: http://sportsmedicine.stryker.com/Product/Biosteon/6/Biosteon-ACL-Screw-Brochure,2019/05。
[7]STOCKFELL股感知識庫,生物醫用材料,Available at: https://www.stockfeel.com.tw/,2021/01/07。
[8]許元銘,2014,生醫材料:導言,亞東紀念醫院。
[9]謝秀欣,2013,全球生醫材料產業現況與展望,工研院生技應用研究部門。
[10]黃瑞堂,2015,高分子材料應用醫療產品新趨勢發展,金屬工業研究發展中心。
[11]葉哲政,2005,金屬骨科器材市場分析,金屬中心。
[12]財團法人國家生技醫療產業策進會,Available at: https://ibmi.taiwan-healthcare.org/, 2018/05/17。
[13]吳長晉,2017,開發生物可降解性及促進骨折癒合改善骨質疏鬆的骨科固定裝置,恩主公醫院。
[14]思宇醫械觀察,Available at: https://med.sina.com/article_detail_103_2_51664.html,2018/10/29。
[15]陳謀法,2010,以有限元素法分析直接骨骼植入型下肢義肢螺釘設計,國立陽明大學醫學工程研究所碩士論文。[16]曾薇、王桂芸,2007,前十字韌帶重建手術對病人之身心影響及其照護,榮總護理,24卷3期,pp. 244-250。
[17]T. Patricio, M. Domingos, A. Gloria, P. Bartolo, 2013, “Characterisation of PCL and PCL/PLA Scaffolds for Tissue Engineering”, Procedia CIRP, vol. 5, pp. 110-114.
[18]M. Forouharshad, L. Gardella, D. Furfaro, M. Galimberti, O. Monticelli, 2015, “A Low-Environmental-impact Approach for Novel Biocomposites Based on PLLA/PCL Blends and High Surface Area Graphite”, European Polymer Journal, vol. 70, pp. 28-36.
[19]V. Vilay, M. Mariatti, Z. Ahmad, K. Pasomsouk, M. Todo, 2010, “Improvement of Microstructures and Properties of Biodegradable PLLA and PCL Blends Compatibilized with a Triblock Copolymer”, Materials Science and Engineering, vol. 527, pp. 6930-6937.
[20]M. Harada, K. Iida, K. Okamoto, H. Hayashi, K. Hirano, 2008, “Reactive Compatibilization of Biodegradable Poly(lactic acid)/Poly(ε‐caprolactone) Blends with Reactive Processing Agents”, Society of Plastics Engineers, vol. 48, pp. 1359-1368.
[21]J. Urquijo, G.G. Echevarria, J.I. Eguiazabal, 2015, “Melt Processed PLA/PCL Blends: Effect of Processing Method on Phase Structure, Morphology, and Mechanical Properties”, Applied Polymer Science, vol. 132, pp. 42641.
[22]H. Zhao, X. Yan, G. Zhao, Z. Gao, 2016, “Microcellular Injection Molded Polylactic Acid/Poly(e-caprolactone) Blends with Supercritical CO2: Correlation Between Rheological Properties and Their Foaming Behavior”, Polymer Engineering and Science, vol. 56, pp. 939-946.
[23]C.L. Simoes, J.C. Viana, A.M. Cunha, 2008, “Mechanical Properties of Poly(e-caprolactone) and Poly(lactic acid) Blends”, Journal of Applied Polymer Science, vol. 112, pp. 345-352.
[24]C.C. Chen, J.Y. Chueh, H.M. Huang, S.Y. Lee, 2002, “Preparation and Characterization of Biodegradable PLA Polymeric Blends”, Biomaterials, vol. 24, pp. 1167-1173.
[25]S.E. Najera, M. Michel, N.S. Kim, 2018, “3D Printed PLA/PCL/TiO2 Composite for Bone Replacement and Grafting”, Materials Research Society, vol. 3, pp. 2373-2378.
[26]G. Wang, G. Chen, Z. Wei, T. Yu , L. Liu , P. Wang , Y. Chang , M. Qi, 2012, “A Comparative Study of TiO2 and Surface‐Treated TiO2 Nanoparticles on Thermal and Mechanical Properties of Poly(ε‐caprolactone) Nanocomposites”, Journal of Applied Polymer Science, vol. 125, pp. 3871-3879.
[27]S. Nájera, M. Michel, J.H. Kyung, N.S. Kim, 2018, “Characterization of 3D Printed PLA/PCL/TiO2 Composites for Cancellous Bone”, Journal of Material Sciences & Engineering, vol. 7, pp. 417-426.
[28]A.S. Luyt, S. Gasmi, 2018, “Influence of TiO2 Nanoparticles on the Crystallization Behaviour and Tensile Properties of Biodegradable PLA and PCL Nanocomposites”, Journal of Polymers and the Environment, vol. 26, pp. 2410-2423.
[29]C.P. Sim, P. Cheang, M.H. Liang, K.A. Khor, 1997, “Injection Moulding of Hydroxyapatite Composites”, Journal of Materials Processing Technology, vol. 69, pp. 75-78.
[30]F.G. Torres, S.N. Nazhat, S.H. Sheikh, M.D. Fadzullah, V. Maquet, A.R. Boccaccini, 2007, “Mechanical Properties and Bioactivity of Porous PLGA/TiO2 Nanoparticle-filled Composites for Tissue Engineering Scaffolds”, Composites Science and Technology, vol. 67, pp. 1139-1147.
[31]M.S.A. Bakar, P. Cheang, K.A. Khor, 2003, “Mechanical Properties of Injection Molded Hydroxyapatite-Polyetheretherketone Biocomposites”, Composites Science and Technology, vol. 63, pp. 421-425.
[32]H. Zhang, J. Huang, L. Yang, R. Chen, W. Zou, X. Lin, J. Qu, 2015, “Preparation Characterization and Properties of PLA/TiO2 Nanocomposites Based on a Novel Vane Extruder”, Royal Society of Chemistry, vol. 5, pp. 4639-4677.
[33]林紀穎,2018,生物可降解PCL骨釘微射出成形研究,國立高雄應用科技大學機械工程系碩士論文。[34]L. Lin, Q. Zhang, D.M. Wootton, R. Chiou, D. Li, B. Lu, P.I. Lelkes, J. Zhou, 2014, “Mechanical Study of Polycaprolactone-Hydroxyapatite Porous Scaffolds Created by Porogen-Based Solid Freeform Fabrication Method”, Journal Apply Biomater Funct Mater, vol. 12, pp. 145-154.
[35]J. Ma, L. Lin, Y. Zuo, Q. Zuo, X. Ren, J. Li, Y. Li, 2019, “Modification of 3D Printed PCL Scaffolds by PVAc and HA to Enhance Cytocompatibility and Osteogenesis”, Royal Society of Chemistry, vol. 9, pp. 5338-5346.
[36]黃俊欽,2013,塑膠模具設計分析講義,高應大模具工程系碩士課程。
[37]李輝煌,2008,田口方法品質設計的原理與務實,高立圖書公司。
[38]張斐章、張麗秋,2010,類神經網路導論:原理與應用,滄海書局。
[39]W.C. Chen, P.H. Tai, M.W. Wang, W.J. Deng, C.T. Chen, 2008, “A Neural Network-Based Approach for Dynamic Quality Prediction in a Plastic Injection Molding Process”, Expert Systems with Applications, vol. 35, pp. 843-849.
[40]鍾瑋煌,2019,田口方法與類神經網路應用於射出產品收縮特性之研究,逢甲大學機械與電腦輔助工程學系碩士論文。[41]張靜怡,2009,以基因演算法結合類神經網路最佳化射出成型作業之翹曲及收縮值,東海大學工業工程與經營資訊學系碩士論文。[42]李永昌,2002,應用田口法與類神經網路於射出成型製程之建構與分析,國立臺灣科技大學工程技術研究所自動化及控制學程碩士論文。[43]許昭益,2012,微透鏡熱壓製程之倒傳遞類神經網路模型建立,國立高雄第一科技大學機械與自動化工程研究所碩士論文。[44]林建志,2017,類神經網路最佳化於藍光讀取頭透鏡射出成形研究,國立高雄應用科技大學機械工程系碩士論文。[45]張良瑋,2008,LED透鏡最佳化設計研究,國立高雄應用科技大學機械工程系碩士論文。[46]D. Kurniawan,2014,運用田口方法、倒傳遞類神經網路、基因演算法及混合粒子群演算法與基因演算法於塑膠射出成形最佳化系統之研究,中華大學科技管理所博士論文。.
[47]陳書強,2019,田口分析法驗證射出參數對光碟機面板翹曲變形量之研究,國立中央大學機械工程學系在職專班碩士論文。[48]黃東鴻,2002,薄殼射出件翹曲變形與殘留應力研究,國立成功大學航空太空工程學系碩士論文。[49]高賦沅,2017,田口實驗結合灰關聯分析探討傘齒輪射出成型之研究,國立彰化師範大學工業教育與技術學系碩士論文。[50]阮武成,2015,以田口方法探討ABS按鍵之塑膠射出成型參數最佳化分析,國立高雄應用科技大學製造與管理外國學生碩士專班碩士論文。[51]刑玉璽,2003,射出成型之塑膠光學讀取透鏡收縮,國立成功大學航空太空工程學系碩士論文。[52]劉昭宏,2005,非等厚塑膠光學元件收縮補償之模流分析,國立臺灣科技大學機械工程系碩士論文。[53]黃義成,2008,最小化機車側蓋翹曲變形分析,國立高雄應用科技大學模具工程系碩士論文。[54]李若豪,2004,奈米級氫氧基磷灰石-幾丁聚醣複合材料之物性及藥物滲透行為研究,國立交通大學材料科學與工程系所碩士論文。