[1]吳信毅、簡嘉宏、吳春甫,2007,“高功率白光發光二極體陣列之技術發展”,科儀新知第二十七卷第六期。
[2]陳義宏,2003,“發光二極體接面溫度量測”,國立交通大學電子物理研究所碩士論文。[3]廖冠翔,2012,“應用鋁鍺共晶於發光二極體覆晶封裝之研究”,國立虎尾科技大學電子工程系研究所碩士論文。[4]林彥竹,2015,“鋁鍺銦錫暫態液相鍵合面之結構分析”,國立虎尾科技大學電子工程系研究所碩士論文。[5]李泱儒,2012,“多層薄膜熱擴散分析研究”,國立成功大學機械工程學系碩博士班碩士論文。[6]施智超、方偉權、呂明生,2008,“薄膜熱傳導特性應用分析技術介紹”,材料世界網,工業材料雜誌260期。
[7]王奕迪,2013,“薄膜熱膨脹與熱擴散係數量測分析研究”,國立成功大學機械工程學系碩博士班碩士論文。[8]林振隆,2012,“熱傳導值之量測方法”,材料世界網,工業材料雜誌309期。
[9]A. J. Angström, 1863, “New method of determining the thermal conductibility of bodies” The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, vol.25, PP. 130-142.
[10]E Jansen and E Obermeier, 1995, “Thermal conductivity measurements on thin films based on micromechanical devices” Technical University of Berlin Master thesis.
[11]Yin-Hsien Huang, 2012, “The 3ω Method for Analyzing the Thermal Conductivities of Chalcogenide Thin Films and Their AC Impedance Properties”, National Chiao Tung University, Department of Materials Science and Engineering Collage of Engineering Master thesis.
[12]W. Käding, H. Skurk, K. E. Goodson, 1994, “Thermal conduction in metallized silicondioxide layers on silicon”, Applied Physics Letters. 65, PP. 1629.
[13]Jaesik Hahn, 2020, “Measurement of hair thermal diffusivity with infrared microscopy enhanced Ångström’s method”, School of Mechanical Engineering, Purdue University Master thesis.
[14]謝佳真,2012,“以鋁鍺錫暫態液相鍵合應用於低溫覆晶封裝之研究”,國立虎尾科技大學電子工程系研究所碩士論文。[15]李志文,2017,“以鋁鍺薄膜研究銅質接合之微通道的特性”,國立虎尾科技大學電子工程系研究所碩士論文。 [16]Woo-Tae Parkal, 2011, “Microstructure and mechanical properties of aluminum-germanium eutectic bonding with polysilicon metallization for microelectromechanical systems (MEMS) packaging”, Scripta Materialia, Vol. 64, pp. 733-736.
[17]Majumdar, 1993, “Microscale Heat Conduction in dielectric Thin Films”, Department of Mechanical and Environmental Engineering, University of California, Santa Barbara Master thesis.
[18]Zhuomin M. Zhang, 2008, “Nano/Microscale Heat Transfer” McGraw-Hill Companies, International Journal of Thermophysics.
[19]Humberto Cabrera, Fatima Matroodi, 2020, “Frequency-resolved photothermal lens: An alternative approach for thermal diffusivity measurements in weak absorbing thin samples” International Journal of Heat and Mass Transfer.
[20]Sobhan Erfantalab, Giacinta Parish, 2022, “Determination of thermal conductivity, thermal diffusivity and specific heat capacity of porous silicon thin films using the 3ω method”, School of Engineering, The University of Western Australia, International Journal of Heat and Mass Transfer.
[21]Takafumi Yao, 1998, “Thermal properties of AlAs/GaAs superlattices”, Electrotechnical Laboratory, Sakura-mura, Ibaraki 305, Japan, Appl. Phys. Lett.51, PP. 1798.
[22]Alberto Muscio, 2004, “Thermal diffusivity measurement in slabs using harmonic and one-dimensional propagation of thermal waves”, International Journal of Thermal Sciences Volume 43, Issue 5, PP.453–463.
[23]Wen Ray Chen, Chang Chen, under submission