|
[1]馬友友,“失圓壓力殼非線性挫曲強度之研究”,國立高雄科技大學,造船及海洋工程研究所,2018。 [2]羅光閔,“小型潛艇壓力殼耐壓強度之研究”,國立臺灣大學,工程科學與海洋工程研究所,2003。 [3]徐慶瑜,“含開孔之圓筒型壓力殼初始疲勞壽命評估之研究”,行政院國家科學委員會專題研究計畫成果報告,2005。 [4]梁卓中,“水下壓力殼之開孔及不連續結構疲勞分析(I)”,行政院國家科學委員會專題研究計畫成果報告,1998。 [5]ASME, Boiler and Pressure Vessel Code, Section Vlll, Division 1, American Society Of Mechanical Engineers, 2010. [6]黃詠芯,“PD-5500規範應用於小型潛艇結構設計”,國立高雄海洋科技大學,造船及海洋工程研究所,2017。 [7]S. V. Dubal, S.Y. Gajjal, “Finite Element Analysis of Reactor Pressure Vessel under Different Loading Conditions”, 2015 International Conference on Computing Communication Control and Automation, p.p. 5-11, 2015. [8]C. H. Xu, “Structure Optimization of the Pressure Vessel with Large Opening and Reinforcement”, Applied Mechanics and Materials, Vol.427-429, pp. 57-60, 2013. [9]V. N. Skopinsky, A. B. Smetankin, “Parametric study of reinforcement of pressure vessel head with offset nozzle”, International Journal of Pressure Vessels and Piping, Vol. 80, No. 5, pp. 333-343, 2003. [10]V. N. Skopinsky, A. B. Smetankin, “Parametric study of reinforcement of pressure vessel head with offset nozzle”, International Journal of Pressure Vessels and Piping, Vol. 80, No. 5, pp. 333-343, 2003. [11]J. Fang, Q. H. Tang, Z. F. Sang, “A comparative study of usefulness for pad reinforcement in cylindrical vessels under external load on nozzle”, International Journal of Pressure Vessels and Piping, Vol. 86, No. 4, pp. 273-279, 2009. [12]S. Xu, J. Lin, B. Liu, Y. Garbatov, Y. Wang, C. G. Soares, “Experimental and numerical buckling analysis of cylindrical pressure hulls with multi-circular openings”, Ocean Engineering, Vol. 214, NO. 15, 107689, 2020. [13]俞銘華,王仁華,王自力,李良碧,“深海載人潛水器有開孔耐壓球殼的極限強度”,中國造船,第46卷,第4期,第92-96頁,2005。 [14]Y. M. Zhu, Q. L. Ma, J. Zhang, W. X. Tang, Y. J. Dai, “Opening reinforcement design and buckling of spherical shell subjected to external pressure”, International Journal of Pressure Vessels and Piping, Vol. 158, pp. 29-36, 2017. [15]Y. M. Zhu, W. W. Liang, X. L. Zhao, X. R. Wang, J. Xia, “Strength and stability of spherical pressure hulls with different viewport structures”, International Journal of Pressure Vessels and Piping, Vol. 176, 103951, 2019. [16]S. B. Pranesh, D. Kumar, S. V. Anantha, D. Sathianarayanan, G. A. Ramadass, “Structural analysis of spherical pressure hull viewport for manned submersibles using biological growth method”, Ships and Offshore Structures, Vol. 13, No. 6, pp. 601-616, 2018. [17]S. B. Pranesh, D. Kumar, S. V. Anantha, D. Sathianarayanan, G. A. Ramadass, “Numerical and experimental study on the safety of viewport window in a deep sea manned submersible”, Ships and Offshore Structures, Vol. 15, No. 7, pp. 769-779, 2019. [18]American Bureau of Shipping (ABS), 1992. Guide for fatigue strength assessment of tankers, Part 3 Steel Vessel Rules. American Bureau of Shipping, New York. [19]DNV-RP-C203 Fatigue Design of Offshore Steel Structures, 2011. [20]DNVGL-CG-0129 Fatigue assessment of ship structures, 2015. [21]IACS, Common structural rules for double hull oil tankers, 2012. [22]W. Fricke, A. Kahl, “Comparison of different structural stress approaches for fatigue assessment of welded ship structures” Marine Structures, Vol. 18, No. 7-8, pp. 473-488, 2005. [23]BSI, “Specification for unfired fusion welded pressure vessls”, 3.5-3.6, 2003. [24]G. M. Luo, Y. C. Hsu, “Non-linear buckling strength of out-of-roundness pressure hull”, Thin-Walled Structures, Vol. 130, pp. 424-434, 2018. [25]ABAQUS Analysis User’s Guide. [26]2020/12/19查詢:ASME BPVC設計起源https://zh.wikipedia.org/wiki/%E9%94%85%E7%82%89%E5%92%8C%E5%8E%8B%E5%8A%9B%E5%AE%B9%E5%99%A8%E8%A7%84%E8%8C%83 [27]B. Yeter, Y. Garbatov, C. G. Soares, “Evaluation of fatigue damage model predictions for fixed offshore wind turbine support structures”, International Journal of Fatigue, Vol. 87, pp. 71-80, 2016. [28]徐慶瑜,“水下載具抗壓結構及管路系統疲勞壽命評估研究(I) ”,科技部補助專題研究計畫成果報告,106。 [29]R. J. Boulbes, “Troubleshooting Finite-Element Modeling with Abaqus”, Springer Nature Switzerland AG, 2020. [30]2021/02/20查詢:Free meshing with quadrilateral and quadrilateral-dominated elements http://194.167.201.93/English/SIMACAECAERefMap/simacae-c-mgnconcmeshingfreequad.htm [31]2021/02/20查詢:What is the difference between the medial axis algorithm and the advancing front algorithm? https://abaqus-docs.mit.edu/2017/English/SIMACAECAERefMap/simacae-c-mgnconcmeshingmedvsadv.htm [32]李家誠,“動態分析法應用於水下載具坐底之可信度評估”,國立高雄科技大學,造船及海洋工程研究所,2020。 [33]王博生,“壓力容器因銲接失圓效應對挫曲強度影響特性之研究”,國立高雄科技大學,造船及海洋工程研究所,2020。 [34]C. T. F. Ross, A. P. F. Little, K. A. Adeniyi, “Plastic buckling of ring-stiffened conical shells under external hydrostatic pressure”, Ocean Engineering, Vol. 32, No. 1, pp. 21-36, 2005. [35]林育全,李龍正,“衛星遙測酬載儀光學鏡片輕量化數值模擬分析”,科儀新知,第30卷,第2期,第65-78頁,2006。 [36]胡耀倫,“質子交換膜燃料電池變形對其效率之影響”,國立中山大學,機械與機電工程研究所,2015。 [37]2021/02/20查詢:有限元素網格劃分基本原則https://wenku.baidu.com/view/a14dfe7102768e9951e73847.html [38]S. R. Cho, T. Muttaqie, Q. T. Do, S. Kim, S. M. Kim, D. H. Han, “Experimental investigations on the failure modes of ring-stiffened cylinders under external hydrostatic pressure”, International Journal of Naval Architecture and Ocean Engineering, Vol. 10, NO. 6, pp. 711-729, 2018.
|