參考文獻
[1]S. Ghosh,R. Yadav,2021,“Future of photovoltaic technologies: A comprehensive review”, Sustainable Energy Technologies and Assessments,Vol.47 , doi:10.1016/j.seta.2021.101410
[2]S. Ghosh,V.K. Yadav,V. Mukherjee,2019,“Impact of environmental factors on photovoltaic performance and their mitigation strategies–A holistic review”, Renewable Energy Focus, Vol.28,pp.153-172.
[3]推動能源轉型,中華民國經濟部,民111年4月,
取自:https://www.re.org.tw/news/more.aspx?cid=198&id=4254
[4]劉漢章,2021,太陽光電模組技術發展趨勢,工研院。
[5]International Technology Roadmap for Photovoltaic (ITRPV),2018.
[6]International Technology Roadmap for Photovoltaic (ITRPV),2020.
[7]B. Zaidi,2018,“Introduction to Photovoltaic Effect”, Solar Panels and Photovoltaic Materials, doi:10.5772/intechopen.74389.
[8]王珽玉,2012,淺談太陽能矽晶片之品質檢驗方法,材料世界網。
[9]葉峻銘,2017,N型高效太陽電池技術發展現況,工研院 綠能所。
[10]X.J. Jia ,C.L. Zhou ,Y.H. Tang ,W.J. Wang,2021,“Life cycle assessment on PERC solar modules”,Solar Energy Materials and Solar Cells , Vol.227 , doi:10.1016/j.solmat.2021.111112.
[11]N. Chen,A. Ebong,2016, “Towards 20% Efficient Endustrial Al-BSF Silicon Solar Cell with Multiple Busbars and Fine Gridlines”, A Solar Energy Materials and Solar Cells, Vol.146, pp.107-113.
[12]S. Braun,G. Hahn,R. Nissler,C. Pönisch, D. Habermann,2013,“Multi-busbar Solar Cells and Modules:High Efficiencies and Low Silver Consumption”, Energy Procedia, Vol.38, pp.334-339.
[13]劉維軒,2010,矽晶太陽電池之雷射切割製程參數分析,國立高雄應用科技大學應用工程科學研究所,碩士論文。[14]楊武璋,2011,無鉛錫對矽晶太陽電池之熱風點焊製程參數最佳化研究,國立高雄應用科技大學應用工程科學研究所,碩士論文。[15]林耘全,2014,太陽電池模組間隙於戶外測試平台之最佳化研究,國立高雄應用科技大學應用工程科學研究所,碩士論文。
[16]陳柏丞,2018,藉戶外實驗和數值計算探討內置石墨複材太陽光電模組發電特性,國立高雄應用科技大學應用工程科學研究所,碩士論文。[17]C.E. Clement,J.P. Singh,E. Birgersson,Y. Wang,Y.S. Khoo,2020, “Hotspot development and shading response of shingled PV modules”,Solar Energy,Vol 207, pp.729-735.
[18]陳韋綺,2013,氮化鋁薄層複合相變化材料之接觸熱阻研究,崑山科技大學機械工程系,碩士論文。[19]K. Nishino,S. Yamashita,K. Torii,1995, “Thermal Contact Conductance under Low Applied Load in a Vacuum Environment”, Experimental Thermal and Fluid Science, Vol.10, pp. 258-271.
[20]P. Zhang,T.F. Cui,Q. Li,2017, “Effect of surface roughness on thermal contact resistance of aluminium alloy”,Applied Thermal Engineering,Vol.121, pp 992-998.
[21]B. Feng, Y. H. Zhang, J. Tu, L.W. Fan, Z. T. Yu, 2021, “Correlating the thermal contact resistance between metal/erythritol interfaces with surface roughness and contact pressure”,International Journal of Heat and Mass Transfer,Vol 176, doi:10.1016/j.ijheatmasstransfer.2021.121407
[22]馬哈仕,2018,使用介面材料降低接觸熱阻之研究,國立交通大學機械工程系,碩士論文。[23]李文貴,劉漢漳,黃兆平,陳長鈞,徐為哲,2019,疊片模組封裝及可靠度測試,財團法人工業技術研究院 綠能與環境研究所。
[24]O.H. Wonje,P. Jisu,J. Chaehwan,P. Jinhong,Y. Junsin,L. Jaehyeong,2020,“Design of a Solar Cell Electrode for a Shingled Photovoltaic Module Application”, Applied Surface Science, Vol.510,doi:10.1016/j.apsusc.2020.145420
[25]林佳駿,2021,PERT-N型太陽電池疊瓦模組製程及發電效益研究,國立高雄科技大學模具工程系碩士班,碩士論文
[26]O.H. Wonje,P. Jisu,J. Chaehwan,P. Jinhong,Y. Junsin,L. Jaehyeong,2020, “Metallization of Crystalline Silicon Solar Cells for Shingled Photovoltaic Module Application”, Solar Energy, Vol.195, pp.527-535.
[27]H.G. Son,H.O. Lim,J.Y. Moon,D.Y. Jun,B.K. Ju,S.H. Kim,2022 ,“Investigating the reliability of electrically conductive adhesives for shingled photovoltaic Si modules”,Solar Energy Materials and Solar Cells,Vol.236, doi:10.1016/j.solmat.2021.111403.
[28]P. Jisu,O.H. Wonje,J. Chaehwan,P. Jinhong,Y. Junsin,L. Jaehyeong,2019, “Analysis of Solar Cells Interconnected by Electrically Conductive Adhesives for High-Density Photovoltaic Modules”, Applied Surface Science, Vol. 484, pp 732-739.
[29]N. Klasen,F. Heinz,A. D. Rose,T. Roessler,A. Kraft,M. Kamlah, 2022, “Root cause analysis of solar cell cracks at shingle joints”,Solar Energy Materials and Solar Cells,Vol 238, doi:10.1016/j.solmat.2022.111590
[30]L. Theunissen,B. Willems,J. Burke,D. Tonini,M. Galiazzo,A. Henckens , 2018, “Electrically conductive adhesives as cell interconnection material in shingled module technology”AIP Conf.Proc,Article 080003, doi:10.1063/1.5049305
[31]J. P. Holman 原著,王鎭雄等人 譯,2000,熱傳遞學 第八版,高立圖書發行。
[32]徐明監編著,2000,"最新切削加工技術”,復漢出版社。
[33]林佳駿,2020,PERT-N型太陽電池疊瓦模組製程及發電效益研究,中華視覺科學與藝術學會,集思高學亞灣會議中心,高雄,台灣,12月18日。
[34]温 子 逵,2012,電子光斑干涉術應用於矽晶太陽能電池之裂縫檢測,國立交通大學機械工程系,博士論文。
[35]C.V. Madhusudana,1996,"Thermal Contact Conductance",Springer, Germany, pp.33-36.
[36]R.S. Prasher,J.C. Matayabas, 2004,"Thermal contact resistance of cured gel polymeric thermal interface material",IEEE Trans. Compon. Packag. Technol, pp.702-709.
[37]曾寶興,2010,移動市太陽電池模組表面依惟熱傳分析研究,國立高雄應用科技大學模具工程系,碩士論文。