|
[1]B. Shaw., F. Dryer, F. Williams, J. Haggard, “The effect of liquid mass transport on the combustion and extinction of bicomponent droplets of methanol and water” 17 (11–12) (1988), pp. 1195-1202. [2]GC Jackson, CT Avedisian, “Automated data analysis for consecutive images from droplet combustion experiments” Volume 115, 1996. [3]Y. Xu, MC Hicks, CT Avedisian. “The combustion of iso-octane droplets with initial diameters from 0.5 to 5 mm: effects on the burning rate and flame extinction.” Proc. Combust. Inst., 36 (2017), pp. 2541-2548M. Tano, 82(2):142-150 · November 1990. [4]A. Ray, S. Kale, “A soot model for transient, spherically symmetric n-heptane droplet combustion” Combustion Science and Technology 174(9):67-102 · September 2002. [5]YC Liu, CT Avedisian, N. Koffi. Trenou, “Experimental Study of Initial Diameter Effects on Convection-free Droplet Combustion in the Standard Atmosphere for n-Heptane, n-Octane, and n-Decane: International Space Station and Ground-based Experiments” 52nd Aerospace Sciences Meeting, AIAA SciTech Forum, (AIAA 2014-1019). [6]DL Dietrich, V. Nayagam, MC Hicks, “Droplet Combustion Experiments Aboard the International Space Station” Microgravity Sci. Technol. (2014) 26:65–76. [7]CT Avedisian, J. Propul. Power, “Soot patterns around suspended n-heptane droplet flames in a convection-free environment” 16 (4) (2000), pp. 628-635. [8]SI Yang, MS Wu, CY Wu “Application of biomass fast pyrolysis part I: Pyrolysis characteristics and products”, Energy 2014;66:162-71. [9]S. Frigo, R. Gentili, L. Tognotti, S. Zanforlin, Benelli, “Feasibility of using wood flash-pyrolysis oil in diesel engines” Tech Pap 1998:982529. [10]SI Yang, TC Hsu, CY Wu, KH Chen, YH Li, “Application of biomass fast pyrolysis part II: the effects that bio-pyrolysis oil has on the performance of diesel Engines”, Energy 2014;66:172-80. [11]A. Tewarson, Fire Safety J. “Safe separation distance calculation model with changing area of fuel packages in large space”, 39 (2) (2004), pp. 131-141. [12]L. Samuel. Manzello, Seul-Hyun Park, “Fuel-dependent Effects on Droplet Burning and Sooting Behaviors in Microgravity” Energy & fuels 2009, 23. 3586-3591. [13]KO Lee, SL Manzello, MY Choi, “The effect of initial droplet diameter on sooting and burning behavior of isolated droplets under microgravity vonditions”, Combust. Sci. Technol., 132 (1–6) (1998), pp. 139-156. [14]M. S. Wu, S. I. Yang, “Combustion characteristics of multi-component cedar bio-oil/kerosene droplet”, Energy113(2016) 788-795. [15]O. Vittori (1984). “Transient stefan flow and thermophoresis around an evaporating droplet”, Nuovo Cimento C, 7(2), 254-269. [16]CK Law, "Unsteady droplet combustion with droplet heating", Combustion and Flame 26 (1976) 17-22. [17]A. Darf, M. Bouaziz, X. Chesneau, A. Ali Chérif, "Comparison of multicomponent fuel droplet vaporization experiments in forced convection with the Sirignano model", Experimental Thermal and Fluid Science 18 (1998) 282-290. [18]H. Hara, S. Kumagai, "Experimental investigation of free droplet combustion under microgravity", Symposium (International) on Combustion 23 (1991) 1605-1610. [19]KD Bartle, EM Fitzpatrick, JM Jones, ML Kubacki, R. Plant, M. Pourkashanian, AB Ross, A. Williams, "The combustion of droplets of liquid fuels and biomass particles", Fuel 90 (2011) 1113- 1119. [20]M. Ghamari, A. Ratner, "Combustion characteristics of diesel and Jet-A droplets blended with the polymeric additive", Fuel 178 (2016) 63-70. [21]DCK. Rao, S. Syam, S. Karmakar, R. Joarder, "Experimental investigations on nucleation, bubble growth, and micro-explosion characteristics during the combustion of ethanol/Jet A-1 fuel droplets", Experimental Thermal and Fluid Science 89 (2017) 284-294. [22] H. Wise, CM Ablow, "Burning of a Liquid Droplet. III. Conductive Heat Transfer within the Condensed Phase during Combustion", The Journal of Chemical Physics 27 (1957) 389-393. [23] Y. Zhang, R. Huang, Z. Wang, S. Xu, S. Huang, Y. Ma, "Experimental study on puffing characteristics of biodiesel-butanol droplet", Fuel 191 (2017) 454-462. [24] AL Randolph, CK Law, "Influence of physical mechanisms on soot formation and destruction in droplet burning", Combustion and Flame 64 (1986) 267-284. [25] AR Karagozian, "Acoustically Coupled Combustion of Liquid Fuel Droplets", Applied Mechanics Reviews 68 (2016) 040801-040811. [26] C. Verwey, M. Birouk, "Experimental investigation of the effect of natural convection on the evaporation characteristics of small fuel droplets at moderately elevated temperature and pressure", International Journal of Heat and Mass Transfer 118 (2018) 1046-1055. [27] H. Ghassemi, SW Baek, QS Khan, "Experimental Study on Evaporation of Kerosene Droplets at Elevated Pressures and Temperatures", Combustion Science and Technology 178 (2006) 1669-1684. [28]TI Farouk, YC Liu, AJ Savas, CT Avedisian, FL Dryer, "Sub-millimeter sized methyl butanoate droplet combustion: Microgravity experiments and detailed numerical modeling", Proceedings of the Combustion Institute 34 (2013) 1609-1616. [29]SI Yang, MS Wu, "The droplet combustion and thermal characteristics of pinewood bio-oil from slow pyrolysis", Energy 141 (2017) 2377-2386. [30]JL Zheng, XF Zhu, QX Guo, QS Zhu, "Thermal conversion of rice husks and sawdust to liquid fuel", Waste Manag 26 (2006) 1430-1435. [31]H. Zhang, R. Xiao, H. Huang, G. Xiao, "Comparison of non-catalytic and catalytic fast pyrolysis of corncob in a fluidized bed reactor", Bioresour Technol 100 (2009) 1428-1434. [32]JP Bok, HS Choi, YS Choi, HC Park, SJ Kim, "Fast pyrolysis of coffee grounds: Characteristics of product yields and bio-crude oil quality", Energy 47 (2012) 17-24. [33]GB Chen, YH Li, GL Chen, WT Wu, "Effects of catalysts on pyrolysis of castor meal", Energy 119 (2017) 1-9. [34]J. Akhtar, N. Saidina Amin, "A review on operating parameters for optimum liquid oil yield in biomass pyrolysis", Renewable and Sustainable Energy Reviews 16 (2012) 5101-5109. [35]G. Chang, Y. Huang, J. Xie, H. Yang, H. Liu, X. Yin, C. Wu, "The lignin pyrolysis composition and pyrolysis products of palm kernel shell, wheat straw, and pine sawdust ", Energy Conversion and Management 124 (2016) 587-597. [36]S. Şensöz, M. Can, "Pyrolysis of pine (Pinus brutia Ten.) chips: 1. Effect of pyrolysis temperature and heating rate on the product yields ", Energy Sources 24 (2002) 347-355. [37]M. Garcia-Perez, TT Adams, JW Goodrum, DP Geller, KC Das, "Production and Fuel Properties of Pine Chip Bio-oil/Biodiesel Blends", Energy & Fuels 21 (2007) 2363-2372. [38]ME Arias, O. Polvillo, J. Rodríguez, M. Hernández, JA González-Pérez, FJ González-Vila, "Thermal transformations of pine wood components under pyrolysis/gas chromatography/mass spectrometry conditions", Journal of Analytical and Applied Pyrolysis 77 (2006) 63-67. [39] A. Bridgwater, G. Peacocke, "Fast pyrolysis processes for biomass", Renewable and sustainable energy reviews 4 (2000) 1-73. [40] A. Bridgwater, S. Bridge, "A review of biomass pyrolysis and pyrolysis technologies", Biomass pyrolysis liquids upgrading and utilization (1991) 11-92. [41]J. Shen, XS Wang, M. Garcia-Perez, D. Mourant, MJ Rhodes, CZ Li, "Effects of particle size on the fast pyrolysis of oil mallee woody biomass", Fuel 88 (2009) 1810-1817. [42]WNRW Isahak, MWM Hisham, MA Yarmo, TY Yun Hin, "A review on bio-oil production from biomass by using pyrolysis method", Renewable and Sustainable Energy Reviews 16 (2012) 5910-5923. [43]M. Asadullah, M. Anisur Rahman, M. Mohsin Ali, M. Abdul Motin, M. Borhanus Sultan, M. Robiul Alam, M. Sahedur Rahman, "Jute stick pyrolysis for bio-oil production in fluidized bed reactor", Bioresour Technol 99 (2008) 44-50. [44]E. Lazzari, T. Schena, CT Primaz, GP da Silva Maciel, ME Machado, CAL Cardoso, RA Jacques, EB Caramão, "Production and chromatographic characterization of bio-oil from the pyrolysis of mango seed waste", Industrial Crops and Products 83 (2016) 529-536. [45]SJ Kim, SH Jung, JS Kim, "Fast pyrolysis of palm kernel shells: influence of operation parameters on the bio-oil yield and the yield of phenol and phenolic compounds", Bioresour Technol 101 (2010) 9294-9300. [46]A. Bridgwater, D. Meier, D. Radlein, "An overview of fast pyrolysis of biomass", Organic geochemistry 30 (1999) 1479-1493. [47] M. Asadullah, MA Rahman, MM Ali, MS Rahman, MA Motin, MB Sultan, MR Alam, "Production of bio-oil from fixed bed pyrolysis of bagasse", Fuel 86 (2007) 2514-2520. [48]O. Onay, OM Kockar, "Slow, fast and flash pyrolysis of rapeseed", Renewable Energy 28 (2003) 2417-2433. [49]P. Quaak, H. Knoef, H. Stassen, "Energy from biomass: a review of combustion and gasification technologies", The World Bank (1999). [50]RE Guedes, AS Luna, AR Torres, "Operating parameters for bio-oil production in biomass pyrolysis: A review", Journal of Analytical and Applied Pyrolysis 129 (2018) 134-149. [51]MN Islam, R. Zailani, FN Ani, "Pyrolytic oil from fluidized bed pyrolysis of oil palm shell and its characterization", Renewable Energy 17 (1999) 73-84. [52]WJ DeSisto, N. Hill, SH Beis, S. Mukkamala, J. Joseph, C. Baker, TH Ong, EA Stemmler, MC Wheeler, BG Frederick, A. van Heiningen, "Fast Pyrolysis of Pine Sawdust in a Fluidized-Bed Reactor", Energy & Fuels 24 (2010) 2642-2651. [53] M. Amutio, G. Lopez, M. Artetxe, G. Elordi, M. Olazar, J. Bilbao, "Influence of temperature on biomass pyrolysis in a conical spouted bed reactor", Resources Conservation and Recycling 59 (2012) 23-31. [54]JL Zheng, "Pyrolysis oil from fast pyrolysis of maize stalk", Journal of Analytical and Applied Pyrolysis 83 (2008) 205-212. [55] T. Kan, V. Strezov, TJ Evans, "Lignocellulosic biomass pyrolysis: A review of product properties and effects of pyrolysis parameters", Renewable and Sustainable Energy Reviews 57 (2016) 1126-1140. [56]A. Bridgwater, P. Carson, M. Coulson, "A comparison of fast and slow pyrolysis liquids from mallee", International journal of global energy issues 27 (2007) 204-216. [57]AV Bridgwater, "Review of fast pyrolysis of biomass and product upgrading", Biomass and Bioenergy 38 (2012) 68-94. [58]P. Basu, "Biomass gasification and pyrolysis: practical design and theory", Academic Press (2010). [59]A. Demirbas, G. Arin, "An overview of biomass pyrolysis", Energy sources 24 (2002) 471-482. [60]ML Boroson, JB Howard, JP Longwell, WA Peters, "Product yields and kinetics from the vapor phase cracking of wood pyrolysis tars", AIChE Journal 35 (1989) 120-128. [61]MN Uddin, WMAW Daud, HF Abbas, "Effects of pyrolysis parameters on hydrogen formations from biomass: a review", RSC Advances 4 (2014) 10467-10490. [62]AE Pütün, N. Özbay, E. Apaydın Varol, BB Uzun, F. Ateş, "Rapid and slow pyrolysis of pistachio shell: effect of pyrolysis conditions on the product yields and characterization of the liquid product", International journal of energy research 31 (2007) 506-514. [63]L. Fagernäs, E. Kuoppala, P. Simell, "Polycyclic Aromatic Hydrocarbons in Birch Wood Slow Pyrolysis Products", Energy & Fuels 26 (2012) 6960-6970. [64]S. Thangalazhy-Gopakumar, S. Adhikari, RB Gupta, SD Fernando, "Influence of Pyrolysis Operating Conditions on Bio-Oil Components: A Microscale Study in a Pyroprobe", Energy & Fuels 25 (2011) 1191-1199. [65]C. Branca, P. Giudicianni, C. Di Blasi, "GC/MS Characterization of Liquids Generated from Low-Temperature Pyrolysis of Wood", Industrial & Engineering Chemistry Research 42 (2003) 3190-3202. [66]H. Ben, AJ Ragauskas, "Comparison for the compositions of fast and slow pyrolysis oils by NMR characterization", Bioresour Technol 147 (2013) 577-584. [67]A. Hossain, P. Davies, "Pyrolysis liquids and gases as alternative fuels in internal combustion engines–A review", Renewable and Sustainable Energy Reviews 21 (2013) 165-189. [68]M. Ikura, M. Stanciulescu, E. Hogan, "Emulsification of pyrolysis derived bio-oil in diesel fuel", Biomass and Bioenergy 24 (2003) 221-232. [69]SI Yang, TC Hsu, CY Wu, KH Chen, YL Hsu, YH Li, "Application of biomass fast pyrolysis part II: The effects that bio-pyrolysis oil has on the performance of diesel engines", Energy 66 (2014) 172-180. [70] Brian S. Haynes “Combustion research for chemical processing” Proceedings of the Combustion Institute Volume 37, Issue 1, 2019, Pages 1-32
|