[1]S. Kushwaha and A.K. Bagha,2020, “Application of composite materials for vibroacoustic – A review,” Materials Today: Proceedings, March.
[2]Z. Zhang and Y. Du,2017, “Sound insulation analysis and optimization of anti-symmetrical carbon fiber reinforced polymer composite materials,” Applied Acoustics, vol. 120, pp. 34–44, May.
[3] P. M. Morse and K. U. Ingrad, 1968. “Theoretical Acoustics,” McGraw-Hill Inc,. pp.375-379,June.
[4]卓永剛,2002, “複合材料板之振動與聲射分析”,國立交通大學機械工程研究所碩士論文。
[5]C. H. Jiang, Y. H. Chang, and T. Y. Kam, 2014,“Optimal design of rectangular composite flat-panel sound radiators considering excitation location,” Composite Structures, vol. 108, pp. 65–76, February.
[6]F.M. Lai and C.W. Tu ,2016, “Optimizing the manufacturing parameters of carbon nanotubes stiffened speaker diaphragm using Taguchi method,” Applied Acoustics, vol. 113, pp. 81–88, December.
[7]彭國晉,2004,“具加勁複合材料結構板之聲傳研究”,國立交通大學機械工程研究所碩士論文。[8]陳捷凱,2007,“彈性支承對複合材料板的振動與聲傳之影響”, 國立交通大學機械工程研究所碩士論文。[9]許財維,2001,“微型喇叭之研製”, 國立交通大學機械工程研究所碩士論文。[10]M. S. Mazloomi, M. Ranjbar, L. Boldrin, F. Scarpa, S. Patsias, and N. Ozada, 2018,“ Vibroacoustics of 2D gradient auxetic hexagonal honeycomb sandwich panels,” Composite Structures, vol. 187, pp. 593–603, March.
[11]J. J. Sargianis, H.-I. Kim, E. Andres, and J. Suhr, 2013, “Sound and vibration damping characteristics in natural material based sandwich composites,” Composite Structures, vol. 96, pp. 538–544, February.
[12]J. Sargianis and J. Suhr, 2012,“Effect of core thickness on wave number and damping properties in sandwich composites,” Composites Science and Technology, vol. 72, no. 6, pp. 724–730, March.
[13]E.W.Guenther. S. Leigh. Flat-panel speaker. USA ,5701359,1997-12-23.
[14]何奇謙,2018“不同脫層大小對碳纖維複材疊層板之機械與動態特性研究,”, 國立高雄科技大學模具工程系碩士論文。[15]B.T. Wang, J.X. Li, and J.J. Shiu, 2007, “Theoretical Simulation of Damping Effect Based on Experimental Measurement” June.
[16]W.T.Thomson, 1981,“Theory of Vibration with Applications”, 2nd Edition, Prentice-Hall, Englewood Cliffs, no. 13, pp. 420–427.
[17]A.N.Thiele,2001, ”Loudspeakers in Vented Boxes:Part I”, Australian Broadcasting Commission, Sydney,N.S.W.
[18]R.H.Small,2006, ”Closed-Box Loudspeaker Systems Part I:Analysis”,School of Electrical Engineering, The University of Sydney, N.S.W.
[19]R.H.Small,2006,” Vented-Box Loudspeaker Systems Part Ⅱ Small-Signal Analysis” , School of Electrical Engineering, The University of Sydney, N.S.W.
[20]張鈞,2002, “揚聲器音圈定位優化”,逢甲大學電聲學位碩士學程論文。[21]趙慶博,2006, “平板揚聲器之設計與失真研究”,國立交通大學機械工程研究所碩士論文。[22]G. Wersényi, “Evaluation of Vibrating Sound Transducers with Glass Membrane Based on Measurements and Numerical Simulations,”,2012,. 132nd Audio Engineering Society Convention 2012, January.
[23]賴宸貿,2012 “平板揚聲器的軟性振動板開發,”,大葉大學工業工程與科技管理學系碩士論文。
[24]S. Huang, Y. Yang, S. Liu, and X. Chu, 2017, “A large-diaphragm piezoelectric panel loudspeaker and its acoustic frequency response simulation method,” Applied Acoustics, vol. 125, pp. 176–183, October.
[25]S. N. Tsai, 2019, “The Effect of Debonding on the Vibration Behaviour of CFRP/Epoxy Sandwich Panels,” Department of Mechanical Engineering Imperial College London,July.
[26]Dr P. Harrison, 2010, “ Design and Manufacture of an Advanced Composite,” University of Glasgow,November.
[27]C. H. Jiang, T. Y. Kam, and Y. H. Chang, 2017, “Sound radiation of panel-form loudspeaker using flat voice coil for excitation,” Applied Acoustics, vol. 116, pp. 375–389, January.
[28]P. A. Toensmeier, 1994, “ Composite industry eyes civil engineering as next big market” , Mod, Plast. April:17-89.
[29]ISO3745, 2012,“Determination of sound power levels of noise sources using sound Pressure-Precision methods for anechoic rooms and semi-anechoic rooms”, Annual Book of ISO Standards.
[30]IEC 60268-5,2003 “Sound system equipment–Part 5:loudspeakers, International Electrotechnical Commission.
[31]ASTM D3039, 2014, “Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials”, Annual Book of ASTM Standards.
[32]ASTM D3518, 2013, “Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate”, Annual Book of ASTM Standards.