[1]Feng, X., “Research on Stress Characteristics of Planetary Gear Drive with Small Tooh Number Difference”, 3 rd International Conference on Mechanical Engineering and Intelligent Systems, Yinchum, China, 2015.
[2]Si, C., Chen, Z., Zhang, H., Zhang, Y. and Cui, C., “Cosine Gear Planetary Transmission with Small Teeth Number Difference”, International Conference on Energy, Power and Mechanical Engineering (EPME2019), Guangzhou, China, 793, 2020.
[3]Li, S., “Contact problem and numeric method of a planetary drive with small teeth number difference”, Mechanism and Machine Theory 43, pp. 1065-1086, 2008.
[4]Lin, W.Y., Hsiao, K.M.and KE, J.Y., “Optimum design of involute tooth profiles for K-H-V planetary drives with small teeth number differences”, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.13, No.1, 2019.
[5]Zhu, C.C., Xiao, N., Zhang, X.R., “Backlash analysis of a new planetary gearing with internal gear ring”, Journal of Chongqing University, Vol. 9, No. 3, pp. 151-158, 2010.
[6]張輝、馮曉寧,“NN 型漸開線少齒差行星減速 機承載能力實驗及齒輪修形方法研究”,機電工程期刊,第38卷,第6期,第787-791頁,2021。
[7]吳素珍、周集祥、李金超、陳旭,“工業機器人 用漸開線少齒差行星齒輪接觸強度分析”河南工程學院學報,第32卷,第1期,第29-33頁,2020。
[8]李濤,2018,“電動助力自行車動力輔助系統設計”, 杭州電子科技大學控制工程系碩士學位論文。
[9]楊江兵、王家序、韓彥峰、肖科,“漸開線少齒 差行星齒輪減速機動態接觸仿真分析”,機械設計與研究,第28卷,第5期,第45-49頁,2012。
[10]Yan, G., Song, C., Zhu, F., Cui, Z., Deng, Z., “The analysis of contact ratio of involute internal beveloid gears with small tooth difference”, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 16, No. 1, 2022.
[11]Ambaye, G., Lemu, H.G., “Dynamic analysis of spur gear with backlash using ADAMS”, Materials Today: Proceedings, Vol. 38, Part. 5, pp. 2959-2967, 2020.
[12]Shinde, D., Mangrulkar, K.S., “T Effect of backlash on bending stresses in spur gears”, International Journal of Scientific Development and Research (IJSDR), Vol. 1, Issue. 7, 2016.
[13]王靜靜,2016,“某諧波減速機波發生器柔性軸承疲勞壽命研究與結構優化”,湖南大學工程碩士學位論文。
[14]曾繼緯,2021,“ RV 減速機之針輪預壓模擬分析研究”,國立虎尾科技大學機械設計工程系碩士學位論文。[15]史陶比爾公司,1994,Speed reducer of the cycloidal type for robots and other industrial manipulators,US005312305A。
[16]鍾梁亮,2012,“漸開線少齒差行星齒輪傳動嚙合特性研究”,湘潭大學碩士學位論文。
[17]孫桓,陳作模,2001,機械原理,高等出版社。
[18]崔建昆,1993,“平行軸式少齒差行星齒輪傳動研究”,重慶大學博士學位論文。
[19]少齒差減速機編寫組,1978,漸開線少齒差行星齒輪減速機,機械工業出版社。
[20]ANSI/AGMA 2001-D04,The gear rim thickness be no less than 1.2 times whole tooth depth.,2005,AMERICAN GEAR MANUFACTURERS ASSOCIATION。
[21]小原齒輪工業編寫組,2006,KHK 齒輪技術資料,小原齒輪工業。
[22]Zhao, L., Du, M., Yang, Y., “Optimizing Gear Micro Geometry for Minimum Transmission Error When Considering Manufacturing Deviation”, International Journal of Materials, Mechanics and Manufacturing, 2018.
[23]于開平,周傳月,潭惠丰,2002,HyperMesh從入門到精通,科學出 版社。
[24]王煥定,焦兆平,2002,有限單元法基礎,高等教育出版社。
[25]白金澤,2005,LS-DYNA理論基礎與實例分析,科學出版社。
[26]王莉樺,2013,“面齒輪齒形過切之研究”,國立虎尾科技大學機械設計工程系碩士班碩士論文。[27]MatWeb,http://www.matweb.com,2021年5月。
[28]維基百科,https://zh.wikipedia.org/wiki/摩擦係數。
[29]柯韋聖,2017,“波發生器安裝位置對齒部應力影響分析”,國立虎尾科技大學機械設計工程系碩士班碩士論文。[30]曹金風,石亦平,2010,Abaqus有限元素分析常見問題解答,機械工業出版社。
[31]趙森,2014,“中型拖拉機變速箱齒輪優化平台設計及有線元分析”,江蘇大學動力工程碩士論文。
[32]李尊格,2022,“RV減速機擺線輪表面塗層改性及其傳動性能研究”,華中農業大學機械碩士論文。