[1] 高建红,李文輝,劉倫倫,王海龍,2014,“鈦合金和鎳合金加工用新型刀具材料的研究進展”,機械工程材料,38卷,12期,12月。
[2] 楊玉森,2000,金屬加工用刀具材料及處理技術手冊,金屬工業研究發展中心,高雄市。
[3] 廖金喜,2017,最少量潤滑(MQL)切削液應用於高速銑削難切削材之研究,國立臺灣大學,博士論文。[4] E.Brinksmeier et al.,2015, “Metalworking fluids-Mechanisms and performance” , CIRP Annals, Vol.64 , p605-628.
[5] 孫惠斌,2017,“航空難加工材料的深冷加工技術研究進展”,航空製造技術,8期。
[6] 林子賢,賴慶忠,洪粕宸,劉惠銘,2015,“連續進料CNC機台加裝油霧回收機之細菌生物氣膠 移除效能評估”,勞動及職業安全衛生研究季刊,23卷,4期,頁441-453,12月。
[7] Sounak K.Choudhury,Muhammed Muaz, 2018,“Natural Oils as Green Lubricants in Machining Processes” , Reference Module in Materials Science and Materials Engineering, Jan.
[8] DamirGrguras, Matjaz Kern, Franci Pusavec, 2018, “Suitability of the full body ceramic end milling tools for high speed machining of nickel based alloy Inconel 718” , Procedia CIRP , Vol.77, p630-633.
[9] Victor Criado, Jose Diaz-Alvarez, Jose Luis Cantero, Maria Henar Miguelez, 2018, “Study of the performance of PCBN and carbide tools in finishing machining of Inconel 718 with cutting fluid at conventional pressures” , Procedia CIRP , Vol.77 ,p634-637.
[10] Gopala Rao Thellaputtaa, Pulcharu Subhash Chandra Bose, C.S.P. Rao, 2017, “Machinability of Nickel Based Superalloys: A Review” , Materials Today: Proceedings ,Vol.4, p3712-3721.
[11] H. Hegab, U. Umer, M. Soliman, H A. Kishawy, 2018, “Effects of nano-cutting fluids on tool performance and chip morphology during machining Inconel 718” , The International Journal of Advanced Manufacturing Technology ,Vol.96, p3449-3458.
[12] Chetan, S. Ghosh, P.V. Rao, 2019, “Comparison between sustainable cryogenic techniques and nano-MQL cooling mode in turning of nickel-based alloy”, Journal of Cleaner Production , Vol.231, p1036-1049.
[13]Ahmadreza Hosseini Tazehkandi, Mohammadreza Shabgard, Farid Pilehvarian, 2015, “On the feasibility of a reduction in cutting fluid consumption via spray of biodegradable vegetable oil with compressed air in machining Inconel 706” , Journal of Cleaner Production, Vol.104, p422-435
[14] Armando Marques,et al.2019, “Turning of Inconel 718 with whisker-reinforced ceramic tools applying vegetable-based cutting fluid mixed with solid lubricants by MQL” , Journal of Materials Processing Tech , Vol.266 ,p530-543.
[15] Knut Sørby, Zydrunas Vagnorius, 2018 “High-Pressure Cooling in Turning of Inconel 625 with Ceramic Cutting Tools”, Procedia CIRP , Vol.77 ,p74-77.
[16] Tatsuya Sugihara, Haruki Tanaka, Toshiyuki Enomoto, 2017, “Development of Novel CBN Cutting Tool for High speed machining of Inconel 718 focusing on wear behaviors of PCBN cutting tool” , Procedia Manufacturing, Vol.10, p436-442.
[17] Albin Hagberg, Peter Malm, “Material Deformation Mechanisms during Machining of Superalloys”, Chalmers University of Technology,2010.
[18] 張書奇,2008,奈米乳化液作為新式金屬切削液之應用研究,行政院國家科學委員會補助專題研究計畫。
[19] 洪良德,2008,切削刀具學,全華科技,新北市。
[20] 王千億、王俊傑,2011,機械製造I,全華科技,新北市。
[21] 周利平,2013,現代切削刀具,重慶大學出版社。
[22] 宋新玉,趙軍,姜俊玲,2009,加工Inconel718時陶瓷刀具的磨損機理,山東大學,博士論文。
[23] 許芫銘,2007,應用田口方法於陶瓷刀具硬車削模具鋼之切削條件最適化研究,國立勤益科技大學,碩士論文。[24] 何千忍,2014,航太用鎳基合金718加工技術研究,國立高雄科技大學,碩士論文。[25] 王民慶,鄧群,杜金輝,田志凌 ,朱靜,2016,ATI 718Plus 合金國內研究進展,鋼鐵研究總院,45卷,12期,12月。
[26] 高虹靜,2009,淺談金屬切削加工切削液,武漢船院,31卷,12期。
[27] 劉鎮昌,2008,切削液的配製方法,華升切削液技術研究中心,5期。
[28] SANSVIK,2010,金屬切削技術培訓手冊。