[1]張宜榛,2015,「CNC工具機結構輕量化設計最佳化研究」,國立高雄應用科技大學模具工程系,碩士論文。[2]賴彥伯,2015,「應用拓樸最佳化於工具機結構設計」,國立中正大學機械工程學系暨研究所,碩士論文。[3]羅竣鴻,2011,「五軸工具機載重件結構最佳化設計與分析」,國立勤益科技大學電子工程系,碩士論文。[4]黃添祥,2012,「五軸工具機結構剛性研究與分析」,國立中興大學機械工程學系所,碩士論文。[5]張清圳,2004,「機床結構動態特性分析與優化設計」,私立中原大學機械工程學系,碩士論文。[6]傅豐椲,2011,「以交叉肋設計提升龍門加工中心機剛性結構」,國立高雄應用科技大學模具工程系,碩士論文。[7]謝雅雙,2014,「應用子結構法於工具機立柱的結構優化分析」,國立中正大學工學院機械工程學系,碩士論文。[8]林榆成,2014,「使用有限元素法之滾輪震動機構模態分析」,國立中興大學精密工程研究所,碩士論文。[9]盛永明,2014「機床支承件結構與性能設計及其軟件實現」,大連理工大學,碩士論文。
[10]張祥雷、姚斌、姚博世、譚曉慶、賀文輝,2013,「五軸工具磨床床身的結構分析與輕量化研究」,製造技術與機床,第 5 期。
[11]Yuwen Li, Jinsong Wang, Xin Jun Liu, Li Ping Wang, 2010, “Dynamic performance comparison and counterweight optimization of two 3-DOF parallel manipulators for a new hybrid machine tool,” Mechanism and Machine Theory, Vol. 45, pp. 1668-1680.
[12]Jun Wu, Guang Yu, Ying Gao, Liping Wang, 2018, “Mechatronics modeling and vibration analysis of a 2-DOF parallel manipulator in a 5-DOF hybrid machine tool,” Mechanism and Machine Theory, Vol. 121, pp. 430-445.
[13]Tristan M. Ericson, Robert G. Parker, 2010, “Planetary gear modal vibration experiments and correlation against lumped-parameter and finite element models,” Journal of Sound and Vibration, Vol. 332, pp. 2350-2375.
[14]Hiroyuki Ohta, Eiji Hayashi, 2000, “Vibration of linear guideway type recirculating linear ball bearings,” Journal of Sound and Vibration, Vol.235, pp. 847-861.
[15]Vilmos Simon, 2009, “Influence of machine tool setting parameters on EHD lubrication in hypoid gears,” Mechanism and Machine Theory, Vol. 44, pp. 923-937.
[16]R. Whalley, A. A. Abdul Ameer, K M Ebrahimi, 2011, “The axes response and resonance identification for a machine tool,” Mechanism and Machine Theory, Vol. 46, pp. 1171-1192.
[17]Jun Wu, Jinsong Wang, Liping Wang, Tiemin Li, Zheng You, 2009, “Study on the stiffness of a 5-DOF hybrid machine tool with actuation redundancy,” Mechanism and Machine Theory, Vol. 44, pp. 289-305.
[18]Yuansheng Zhou, Zezhong C. Chen, Xujing Yang, 2015, “An accurate, efficient envelope approach to modeling the geometric deviation of the machined surface for a specific five-axis CNC machine tool,” International Journal of Machine Tools and Manufacture, Vol. 95, pp. 67-77.
[19]Brandon C Gegg, Steve Suh, Albert C.J. Luo, 2010, “Modeling and theory of intermittent motions in a machine tool with a friction boundary,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol. 132, pp. 0410011-0410019.
[20]Mohammad Faraji Ghanati, Reza Madoliat, 2012, “New continuous dynamic coupling for three component modeling of tool-holder-spindle structure of machine tools with modified effected tool damping,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol. 134, pp. 0210151-0210170.
[21]Mario Junior Ricardo Nascimento Marques, Braian Konzgen Maciel, Gabriel M. Balota, Renan Fonseca, Manue Simosa, Henrique S. Conceição, Eder Mateus Nunes Gonçalves, Silvia Silva da Costa Botelho, 2018, “Embedded Agent based on Cyber Physical Systems: Architecture, Hardware Definition and Application in Industry 4.0 Context, ” Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics, Vol. 2, pp. 584-591.
[22]王柏村,實驗模態分析簡介,國立屏東科技大學實驗模態分析課講義。
[23]張匡儀,2016,振動感測元件應用於智慧機械製造,工研院講義。
[24]徐業良,2007,有限元素分析,元智大學最佳化設計實驗室課程講義。
[25]ANSYS,Release 15.0,Help System,Element Reference,ANSYS,Inc.