電子產品在小型化、可攜式、元件高度裝配及降低生產成本之發展趨勢下，表面粘著技術及表面粘著元件已快速發展，並且在電磁相容的考量下，電子產品的電磁干擾消除已成為電子系統設計之基本要求，因此積層電感與陶鐵磁珠應運而生。
此次的研究題目主要是藉著實際的印刷實驗，對於較不為人所注意的網目、乳膠厚度及印刷漿料的種類做探討，針對網目、乳膠厚度及印刷漿料對網版印刷的印刷厚度的影響做研究。

Owing to their thin-thickness and light-weight, chip type electronic products are developed and replace the traditional components.
In this thesis, process of preparing multi-layer ceramic inductor from single-layer inductor, i.e. silver-palladium electrodes, ceramic pastes, etc., was inevestigated. Effect of mesh screen, emulsion paste, and other various kind of pastes on the printing thickness wereobserved and discussed.

中文摘要---------------------------------------------------- Ⅰ
英文摘要---------------------------------------------------- Ⅱ
致謝-------------------------------------------------------- Ⅲ
目錄-------------------------------------------------------- Ⅳ
表目錄------------------------------------------------------ Ⅴ
圖目錄------------------------------------------------------ Ⅶ
1.背景介紹--------------------------------------------------- 1
1.1 積層晶片電感器製程技術----------------------------------- 1
1.2 積層晶片電感的製作技術----------------------------------- 5
1.3 積層晶片電感製作介紹------------------------------------- 6
1.4 網版印刷機制-------------------------------------------- 12
1.5 製程上常見之問題---------------------------------------- 15
1.6 膜厚不均要因分析圖(魚骨圖)------------------------------ 34
2. 研究目的------------------------------------------------- 35
3. 實驗方法------------------------------------------------- 36
3.1 儀器設備--------------------------------------------- 36
3.2 漿料------------------------------------------------- 40
3.3 實驗步驟--------------------------------------------- 40
4. 結果與討論----------------------------------------------- 42
4.1 印刷漿料對印刷厚度的影響----------------------------- 42
4.2 乳膠厚度對印刷厚度的影響----------------------------- 58
4.3 網目對印刷厚度的影響--------------------------------- 72
4.4 討論------------------------------------------------ 100
5.結論----------------------------------------------------- 103
6.參考資料------------------------------------------------- 105
7.附件----------------------------------------------------- 109

1.高谷埝，"複合機能部品"，電子材料， April, pp.89-94, 1992﹒
2.柯文淞，宋小敏，孫美玲，陳繼仁，"製程條件對積層電感與陶鐵磁珠特性的影響"，粉末冶金會刊，第18卷，第3期， pp.138-144, 1993﹒
3.施紹儒，林鴻欽，"流變特性與網版印刷關係之探討"，工業材料，177期， pp.166-170, 2001﹒
4.中澤睦士，"積層晶片電感"，太陽誘電技報，8期， pp.62-66, 1992﹒
5.Takaya Minoru, "The Multilayer Chip Inductor Features Innovative Design" J.E.E., December, pp.38-41, 1986﹒
6.中澤睦士，"Chip Inductor ",電子技術，10期， pp.57, 1992﹒
7.劉淑芬，"埋入式被動元件材料技術之發展趨勢"，工業材料，175期， pp.150-164, 2001﹒
8.許正源，"高頻積層晶片電感與複合元件"，工業材料，105期，pp.51-60, 1995﹒
9.柯文淞，"電感器的新生─積層晶片電感"，工業材料，88期，pp.60-65, 1994﹒
10.許正源，"複合積層晶片元件─LC濾波器"，工業材料，88期，pp.72-79, 1994﹒
11.B.D. Cullity, "Introduction To Materials", Addison Wesley Publical Co., London, 1972.
12.Y. Shichijo, "Theory and Application of Ferrite", ed by T. Takei Maruzen, 1960.
13.B.E. Levin, "Nickel-Zinc Ferrite Containing Copper", Izv. V.U.Z. Chernaya Metall, 1974.
14.宋小敏，"積層晶片電感元件之製作"，工業材料，88期， pp.66-71, 1994﹒
15.P.J.Holmes, R.G. Loasby, "Handbook of thick film technology ", Electrochemical Publications Limited, pp.1, 1976﹒
16.施紹儒，"網印製程模擬之探討"，工業材料，192期，pp.153-158, 2002﹒
17.Sano Yasushi, "Progress and Application Methods of Advance Screen Printing Technologies in Electronics Fields", Micro-tec 2000 Training Course﹒
18.張光山，"網版印刷在印刷電路板製作的影響"，印刷科技，第9卷，第3期，pp.79-84,1993﹒
19.S. Gebhard,"A Practical Approach to Rheology and Rheometry", Gebrueder HAAKE Gmbh, Germany, pp.13-22, 1994﹒
20.J.S. Ward, F.D. Martin, "Prediction of Viscosity of Partially Hydrolyzed Polyacrylamide Solution in the Presence of Calcium and Magnesium Ions", Soc Pet Eng J, 21, pp.623-631, 1981﹒
21.K.A. Ait, P.J. Carreau, G. Chauveteau, "Rheological Properties of Partially Hydrolyzed Polyacrylamide Solution", J. Rheology, 33, pp.537-561, 1981﹒
22.S. Blackburn, H. Bohm, "Silicon Carbide Fiber-Reinforced Alumina Extrusion",J. Materials Research, 10, pp.2481-2487, 1995﹒
23.P.Coussot, S. Proust, C. Ansey,"Rheological Interpretation of Yield Stress Fluids", J. Non-Newtonian Fluid Mechanics, 66, pp.55, 1996﹒
24.W. Pabst, J. Havrda, E. Gregorova, "Rheology of Ceramic Injection-Molding Feedstocks", Ceramics-Silikaty, 43, pp.1, 1999﹒
25.S.Y. Zhang, X.Y. Xiang, "Constitutive Relationship of Visco-Elasticity of Polymer Matrix Composites with Creep Damage", International Sample Electronics Conference, 24, pp.319, 1992﹒
26.L.J. Struble, M.A. Schultz, "Paste Rheology", Proceeding of the Engineering Foundation Conference, pp.147, 1994﹒
27.H. Uchikawa, S. Hanehara, H. Hirao,"Infiuence of Microstructure on the Physical Properties of Concrete Prepared by Substituting Mineral Powder for Part of Fine Aggregate", Cement and Concrete Research, 26, pp.101, 1996﹒
28.H.J. Johnston, "The Squeegee-Our Basic Toll", Technical Guidbook of the Screen Printing Industry, Vo 4, Q11, USA, 1986﹒
29.S.J.D. Ericsson, "How to Improve Quality of Screen Printing and reduce Errors", Technical Guidbook of the Screen Printing Industry, Vo 4, Q10, SPAI, Virginia USA, 1985﹒
30.謝文，"現代絹印"，群梓出版社， pp.148, 1990﹒
31.M. Young, "Proper Techiques and Process Control for Printing Overlay Front Panels", Technical Guidbook of the Screen Printing Industry, Vo 4, Q12, SPAI, Virginia USA, 1988﹒
32.SPAI, "Glossary of Screen Printing ", Technical Guidbook of the Screen Printing Industry, Vo 6, SPAI, Virginia USA, 1990﹒