[1]H. Chung, S. Y. R. Hui, and K. K. Tse, “Reduction of power converter EMI emission using soft-switching technique,” IEEE Trans. Electromagn. Compat., vol. 40, no. 3, pp. 282-287, Aug. 1998.
[2]P. K. Jain, S. D. Dewan, “Design of a Clamped Series Inverter for Induction Heating,” CAN J Elect. & Comp. Eng., Vol. 14, No 3, 1989.
[3]J. A. Sabaté, F. C. Lee, “Zero-Voltage Switching With Fixed Frequency Clamped-Mode Resonant Converter,” Proc. Virginia Power Electronics Center Seminar, Blacksburg, VA, pp.83-91, 1989.
[4]H. Sarnago, O. A. Mediano, and J. Burdio, “Efficient and cost-effective ZCS direct ac-ac resonant converter for induction heating,” IEEE Trans. on Industrial Electronics, vol. 61, pp. 2546-2555, May 2014.
[5]K. Chen and T. A. Stuart, “1.6 KW, 110 kHz dc/dc converter optimized for IGBT’s,” IEEE Trans. Power Electron., vol. 8, no. 1, pp. 18–25, Jan. 1993.
[6]J. G. Cho, J. Sabate, G. Hua, and F. C. Lee, “Zero voltage and zero current switching full bridge PWM converter for high power applications,” IEEE Trans. Power Electron., vol. 11, no. 4, pp. 622–628, Jul. 1996.
[7]J. G. Cho, G. H. Rim, and F. C. Lee, “Zero voltage and zero current switching full bridge PWM converter secondary active clamp,” IEEE Trans. Power Electron., vol. 13, no. 4, pp. 601–607, Jul. 1998.
[8]E. S. Kim, K. Y. Joe, M. H. Kye, Y. H. Kim, and B. D. Yoon, “An improved soft switching PWM FB dc/dc converter for reducing conduction loss,” IEEE Trans. Power Electron., vol. 14, no. 2, pp. 258–264, Mar. 1999.
[9]J. G. Cho, J. W. Baek, C. Y. Jeong, and G. H. Rim, “Novel zero-voltage and zero-current-switching (ZVZCS) full bridge PWM converter using a simple auxiliary circuit,” IEEE Trans. Ind. Appl., vol. 35, no. 1, pp. 15–20, Jan. 1999.
[10]B. Gu, J. S. Lai, N. Kees, and C. Zheng, “Hybrid-switching full-bridge dc-dc converter with minimal voltage stress of bridge rectifier, reduced circulating losses, and filter requirement for electric vehicle battery chargers,” IEEE Trans. Power Electron., vol. 28, no. 3, pp. 1132–1144, Mar. 2013.
[11]R.L. Steigerwald, “A Comparison of Half-bridge Resonant Converter Topologies” Power Electronics, Institute of Electrical and Electronics Engineers Transactions, Vol. 3, pp,174-182, April 1988.
[12]R. Oruganti and F. C. Lee, “Resonant power processors—Part I: State plane analysis,” IEEE Trans. Ind. Appl., vol. IA-21, no. 6, pp. 1453– 1460, Nov. 1985.
[13]R.L. Steigerwald, “A Comparison of Half-bridge Resonant Converter Topologies” Power Electronics, Institute of Electrical and Electronics Engineers Transactions, Vol. 3, pp,174-182, April 1988.
[14]J. T. Matysik, “The current and voltage phase shift regulation in resonant converters with integration control,” IEEE Trans. Ind. Electron., vol. 54, no. 2, pp. 1240–1242, Apr. 2007.
[15]W. J. Lee, C. E. Kim, G. W. Moon, and S. K. Han, “A new phaseshifted full-bridge converter with voltage-doubler-type rectifier for highefficiency PDP sustaining power module,” IEEE Trans. Ind. Electron., vol. 55, no. 6, pp. 2450–2458, Jun. 2008.
[16]W. J. Lee, S. W. Choi, G. E. Kim, and G. W. Moon, “A new PWM controlled quasi-resonant converter for a high efficiency PDP sustaining power module,” IEEE Trans. Power Electron., vol. 23, no. 4, pp. 1782–1790, Jun. 2008.
[17]C. W. Roh, H. J. Kim, S. H. Lee, and M. J. Youn, "Multilevel Voltage Wave-Shaping Display Driver for AC Plasma Display Panel Application", IEEE Journal of Solid-State Circuits, Vol. 38, No.6, June 2003, pp.935-947.
[18]E. H. Kim and B. H. Kwon, “Zero-voltage-and zero-current-switching full bridge converter with secondary resonance,” IEEE Trans. Ind. Electron., vol. 57, no. 3, pp. 1017–1025, Mar. 2010.
[19]Y. Chen and Y. Kang, “An improved full-bridge dual-output dc-dc converter based on the extended complementary pulse width modulation concept,” IEEE Trans. Power Electron., vol. 26, no. 11, pp. 3215–3229, Nov. 2011.
[20]Y. Chen, X. Pei, L. Peng, and Y. Kang, “A high performance dual output dc-dc converter combined the phase shift full bridge and LLC resonant half bridge with the shared lagging leg,” in Proc. Appl. Power Electron. Conf. Expo., 2010, pp. 1435—1440.
[21]W. S. Yu, J. S. Lai, W. H. Lai, and H. M. Wan, “Hybrid half-and full bridge converter with high efficiency and full soft-switching range,” in Proc. IEEE Energy Convers. Congr. and Expo., Sep. 2011, pp. 3080–3087.
[22]M. Yu, D. Sha, and X. z. Liao, “Hybrid phase shifted full bridge and LLC half bridge DC-DC converter for low-voltage and high-current output applications,” IET Power Electron. vol.7, pp.1832-1840,2014.
[23]V. L. Tran, S. Yu, D. D. Tran, W. Choi, “A Novel Hybrid Converter for 6.6Kw On Board Charger,” ECCE Power Electronics., Conf., June. 2015, pp. 1-5.
[24]R. W Erickson, and D. Maksimovic,「Fundamentals of Power Electronics」,Kluwer Academic Publishers, 2004 2nded.
[25]H. Sarnago, O. A. Mediano, and J. Burdio, “Efficient and cost-effective ZCS direct ac-ac resonant converter for induction heating,” IEEE Transactions on Industrial Electronics, vol. 61, pp. 2546-2555, May 2014.
[26]Y.-K. Lo, C.-Y. Lin, M.-t. Hsieh, and C.-Y, “Phase-Shifted full-bridge series-resonant DC-DC converters for wide load variations,” IEEE Trans. Ind. Electron., vol. 58, no. 6, pp. 2572-2575,Jun. 2011
[27]藍元志,具溫度感測補償均流機制之多模組並聯電源轉換器,國立成功大學電機工程系碩士學位論文,西元2013年。[28]林正宏,1Kw全橋相移式升壓型零電壓切換轉換器之研製,國立台灣科技大學電子工程系碩士學位論文,西元2010年。[29]陳雅君,LLC諧振轉換器之設計與研製,國立成功大學電機資訊學院電機工程系電力電子產業研發碩士專班碩士論文,西元2009年。[30]張中祥,結合LLC半橋諧振之全橋相移直流轉換器研製,國立台北科技大學電機工程系電力電子產業碩士專班碩士論文,西元2015年。