1.小野寺重勝著，實踐FMEA手法-提升產品或系統的可靠性、維護性、安
全性，蘇錦夥等編輯，財團法人中衛發展中心，台北，2001。
2.白光華，創新協同產品研發:PDM應用實務，中國生產力中心，台北，
2003。
3.何蕙萍，「組織協調成本與虛擬組織特性之研究—以電腦軟體業為
例」，彰化師範大學商業教育學系，民國89年6月。
4.赤尾洋二著，品質展開入門，展開研究小組譯，桃園，1995。
5.林立宜，「運用模糊層級分析法(FAHP)建立護理之家服務品質指
標」，國立雲林科技大學，民國91年6月。
6.林建煌，消費者行為，智勝文化事業有限公司，台北，2002。
7.狩野紀昭，瀨樂信彥，高橋文夫，新一著，有魅力的品質與應該有的
品質，品質管制月刊，第二十一卷，第五期，1984。
8.倪嘉鴻，「筆記型電腦消費者購買行為之研究—以大台北地區居民為
例」，台北大/企業管理學系，民國89年6月。
9.高橋勇進，「筆記型電腦之日本消費者行為---以東京二十三區大學生為例」，中興大學企業管理研究所，民國87年6月。
10.張珮瑜,「筆記型電腦滿意度標竿之建構及分析」 ,交通大學工業工
程及工業管理研究所，民國87年6月。
11.張清亮、蔡志弘、魏秋建，「失效模式與效應分析的評價方法」，
Journal of the Chinese Institute Industrial engineers, 17,
pp.51-64 , 2000。
12.張耀升，「筆記型電腦消費者行為研究---以台北市大學生為例」，交通大學管理科學研究所，民國86年6月。
13.梁禺川，「聯合分析法在筆記型電腦最佳化設計之研究」，台灣工業
技術學院工程技術研究所，民國86年6月。
14.郭人傑，「以品質機能展開應用於產品開發過程中規格訂定之研究以
筆記型電腦之設計為例」，台灣科技大學工業管理研究所，民國85年
6月。
15.黃素齡，「探討筆記型電腦之Kano二維品質特性」，元智大學管理研究所，民國88年6月。
16.楊長林，「新產品開發：設計與定位、流程、績效評估之整合性管理
研究」，台灣科技大學工業管理系博士論文，民國91年6月。
17.廖韻淳，「新產品開發之績效評估及獎酬制度-以宏碁與仁寶為例-
」，中原大學會計研究所，民國89年6月
18.劉儒俊，「行銷資源最適配置模式—Fuzzy AHP之應用」，中正大學企業管理研究所，民國90年6月。
19.謝堅宏，「台北地區筆記型電腦品牌忠程度之研究」，中興大學企業管理研究所，民國86年6月。
20.聶自偉，「筆記型電腦之市場區隔與產品定位」，輔仁大學應用統計研究所，民國88年6月。
21.蘇木春、張孝德，機器學習：類神經網路、模糊系統以及基因演算法
則，臺北，全華科技圖書股份有限公司，2003。
22.Aaker, David A. and Robert Jacobson (1994), “The Financial
Information Content of Perceived Quality”,Journal of
Marketing Research, 31, pp.191-201.
23.Anderson, Eugene W., Claes Share, and Donald R. Lehmann
(1994),”Consumer satisfaction, market Share , and
profitability: Finding from Sweden”, Journal of Marketing
,58 , July, pp.53-66.
24.Baker, J. (1994), “AJ26 design and verification process
”, PhD Thesis, (excerpt) sponsored by Jaguar Motor
Company, Coventry, UK, 15 April.
25.Bendell,A.(1988), “Introduction to Taguchi methodology”,
Proceedings of the 1988 European Conference, London, pp.1-
14.
26.Bennet, J.（1984）,“Managing to meet usability requirements
: establishing and meeting software development
goals.” Prentice-Hall, NJ, pp.161–184.
27.Booker, J.D.(2003) , “Industrial practice in designing for
quality”,The International Journal of Quality &
Reliability Management., 20, 2/3, pp. 288-304.
28.Boothroyd, G. and Dewhurst, P.(1988) , “Product Design for
Manufacture and Assembly.” Manufacturing Engineering, 100,
4 , pp. 42-46.
29.Boothroyd, G.. and Dewhurst, P.(1986), “product design
assembly”, Wakefield,RI: Boothroyd Dewhurst.
30.Brock, J.M and Wright,P.K. (2002),“Design tool for
injection molded snap fits in consumer products”, Journal
of Manufacturing Systems, 21, 1, pp.32-40.
31.Buckley, J. J. and Feuring ,T. and Hayashi ,Y.（2001）,
“Fuzzy hierarchical analysis revisited”, European Journal
of Operational Research, 129, pp.48-64..
32.Chen, C.T.( 2000),“Extensions of TOPSIS for group decision-
making under fuzzy environment”, Fuzzy Sets and Systems,
114, pp.1-9.
33.Clausing, D. (1994), “Total Quality Development, A Step-By- Step Guide to World-Class Concurrent Engineering”, ASME
Press.
34.Cooper, R. G.,(2001), “Winning at New Products:
Accelerating the Process from Idea to Launch”, 3rd
edition. Cambridge.
35.Cooper, R.(2000), “Doing it Right Winning with New
Products”, Ivey Business Journal, July/August.
36.Cooper, R.G, and Edgett, S.J. (2003), “Overcoming the
crunch in resources for new product development”, Research
Technology Management, 46, 3, pp.48-59.
37.Cooper, R.G.(1996), “ New products: what separates the
winners from the losers.” in PDMA Handbook-for New Product
Development, New York
38.Crawford, C. M.(1992), “The hidden costs of accelerated
product development.” Journal of Product Innovation
Management, 9, 3 , pp.188-199.
39.Crosby, P.B.（1979）,“Quality is Free. ”, New York: New
American library.
40.Crow, K.A.(1983), “Concurrent engineering ”,Tool and
manufacturing engineers handbook:design for manufacturing,
Vol.6.
41.Csutora, R.and Buckley, J. J.（2001）,“Fuzzy hierarchic al
analysis: the Lambda-Max method”, Fuzzy Sets and Systems
,120, pp.181-195.
42.Daimler Chrysler and Ford and General and Plexus(2000), “
QS-9000 Training System, Potential Failure Mode and Effects
Analysis (FMEA)”, Plexus Corporation .
43.Daimler Chrysler Corporation and Ford Motor Company and
General Motors Corporation（1995）,“Potential Failure Mode
and Effects Analysis,Reference Manual”, Second Edition.
Feb.
44.Driva, H. and Pawar, K.S. and Menon, U. (1999), “A
framework for product development metrics”, International
Journal of Business Performance Management,. 1 , 3, pp.312-
26.
45.Dumas, J.S.and Redish, J.C.（1994）, “A Practical Guide to
Usability Testing”, Ablex, Norwood, NJ.
46.Engel,J.F. and Kollat,D.T. and Blackwell,R.D.(1982),
“Consumer behavior” , New York
47.Ettlie, J.E.(1997) ,“Integrated design andnew product
success.” , Journal of operation management, 33,1, pp.33- 55.
48.Fung, R.Y.K.and Popplewell, K. and XIE, J.（1998）,“An
intelligent hybrid system for customer requirements
analysis and product attribute targets determination.”
International Journal of Production Research, 36, pp.13-34.
49.Furuta, H. and Hase, H. and Watanabe, E. and Tonegawa, T.
and Morimoto, H.(1996), “Applications of genetic algorithm
to aesthetic design of dam structure” Advances in
Engineering Software , 25, pp.185–195.
50.Garvin, D. A.(1988),“Managing Quality: the Strategic and
Competitive Edge”, New York: Free Press.
51.Ginn ,D.M. and Jones ,D.V. and Rahnejat ,H. and Zairi ,M.
(1998), “The QFD/FMEA interface”, European Journal of
Innovation Management ,1, 1, pp. 187– 200.
52.Ginn, D.M. (1996), “Effective application of quality
function deployment: a flexible proposal for best practice
within a changing quality improvement environment to ensure
highest customer satisfaction”, MSc by Research Thesis,
Departments of Mechanical Engineering and Management
Centre,University of Bradford, July.
53.Golomski, W.A.（1995）,“Reliability and quality in
design”, IEEE Transactions on Reliability, 44, 2, pp.216-
219.
54.Gordon, F. and Isenhour, R.（1990）,“Simultaneous
Engineering: in Simultaneous Engineering Integrating
Manufacturing and Design. ”,Society of Manufacturing
Engineers,Michigan.
55.Grapentine, T. (1995) , “Dimensions of an Attribute”,
Marketing Research, 7(3), pp.18-28.
56.Griffin, A. and Page, A. L.(1996) , “PDMA success
measurement project: recommended measures for product
development success and failure.”, Journal of Product
Innovation Management, 13, 6, pp. 478-496.
57.Griffin, A., Hauser, J.R.（1993）,“The voice of the
customer”, Marketing Science, 12, 1, pp.1-27.
58.Griffin,A.(1997), “PDMA research on new product development
practices: updating trends and benchmarking best practices
”, Journal of product innovation Management,14, pp.429-458.
59.Han, S. H.and Yun, M. H.and Kwahk, J.Y .and Hong, S.W.
（2000）,“ Usability of consumer electronic
products” ,International Journal of Industrial Ergonomics,
28, pp.143–151.
60.Handfield, R.B.and Ragatz, G..L. and Petersen, K.J. and
Monczka, R.M. (1999), “Involving suppliers in new product
development”, California
61.Hauser, J.R. and Clausing, D. (1988), “The house of
quality”, Harvard Business Review, May-June, pp.63-73.
62.Hofmeester, K.and Kemp, J.A.M.and Blankendaal, A.C.M.(1996),
“Sensuality in product design: a structured approach”.
Proceedings of the ACM CHI ’96 Conference, pp.428–435.
63.Hong, P.C. and Doll, W.(2001), “Team vision in integrated
product development” Proceeding of the Decision Sciences
institute, pp.426-428.
64.Hsiao, S. W. (2002), “Concurrent design method for
developing a new product”,International Journal of
Industrial Ergonmics, 29, pp.41-55.
65.Hunt , H.K.(1977), “CS/D: Overview and future research
directions”, Marketing Science Institute, pp.455-488.
66.Jordan, P.W.（1997）“The four pleasures: Taking human
factors beyond usability” , Proceedings of the 13th
Triennial Congress of the International Ergonomics
Association, 2, pp.364–366.
67.Juran, J.M.（1974）“Quality Control Handbook”New York:
McGraw-Hill.
68.Kano, N.and Seraku, N.and Takashi, F. and Tsuji, S. (1994)“
Attractive quality and must-be quality”, The Journal of
Japanese Society for Quality Control,14,2, pp. 39-48.
69.Kuo, T.C. and Hung, S.H. and Zhang, H.C.(2001), “Design
for manufacture and design for X : concepts, application,
and perspectives”, Computer and Industrial Engineering,
41, pp.246-260.
70.Kwong, C.K. and Bai, H.（2002）, “A fuzzy AHP approach to
the determination of importance weights of customer
requirements in quality function develoyment”, Journal of
Intelligent Manufacturing, 13, pp.367-377.
71.Lancaster, Kelvin J. (1996), “A New Approach to Consumer
Theory,”Journal of Political Economy, 74, pp.132-157.
72.Lee, M. and Lou, Y.C. (1996) , “Consumer Reliance on
Intrinsic and Extrinsic Cues in Product Evaluations: A
Conjoint Approach”, Journal of Applied Business Research,
12,1, pp.21-34.
73.Lee,S.Y.,(1993), “A study on the product design
considering the human’s emotion as a part of the human
interface technology”. SICE ’93 Proceedings of the 32nd
SICE Annual Conference, pp.1091–1093.
74.Lee, W. N. and Um, K. H. R. (1992) , “Ethnicity and
Consumer Product Evaluation: A Cross-Cultural Comparison of
Korean Immigrants and Americans”, Advances in Consumer
Research, 19, pp.429-436.
75.Lu, M.H. and Madu, C. N. and Kuei, C. H and Winokur, D.,
（1994）,“Integrating QFD, AHP and benchmarking in
strategic marketing”, The Journal of Business & Industrial
Marketing, 9, 1, pp. 41-51.
76.Lyman, D. (1995),“Are they my QFD rules or are they new
QFD rules?, or how to change a technology”, Transactions
from the Seventh Symposium on Quality Function Deployment,
June11-13, pp.101-110.
77.Maier, M.W（1995）,“Quantitative engineering analysis with
QFD”, Quality Engineering, 7, 4, pp.733-746.
78.Masud, A. S.M. and Dean, E. B.（1993）,“Using fuzzy sets
in quality function deployment”, Proceedings of the 2nd
Industrial Engineering Research Conference, pp. 270-274.
79.Meybodi, M. Z.(2003), “Using principles of just-in-time to
improve new product development process” , Advances in
Competitiveness Research, 11,1, pp.116-130.
80.Mishra S., K. D. and Lee ,D. H.(1996), “Factors affecting
new product success: cross country comparisons.”, Product
Innovation Management, 13, 6, pp. 530-550
81.Monroe, K. B. and Dodds, W. B. (1988) , “A Research
Program for Establishing the Validity of the Price-quality
Relationship”, Journal of the Academy of Marketing
Science, 16, pp.151-168.
82.Montoya-Weiss, M. M. and Calantone, R. J.(1994),
“Determinants of new product performance: a review and
meta analysis.”, Journal of Product Innovation Management
11, 5, pp.397-417.
83.Mowen, J.C. and Minor, M.(2001),“Consumer Behavior: A
Framework”, New jersey: Prentice-Hall.
84.Mowen, John C.(1988), “Beyond Consumer Decision Marking
”,The Journal of Consumer Marketing, 5, 1, pp15-26.
85.Nielsen, J.（1996）,“Designing to seduce the user”, IEEE
Software ,13 (5), pp.18–20.
86.Page, A.L.(1993), “Assessing new product development
practices and performance establishing crucial norms”,
Journal of Product Innovation Mangement,10, pp.273-290.
87.Parasuraman, A and Zeithaml ,V.A.and Berry ,L.（1988）,
“SERVQUAL: A Multiple-Item Scale for Measuring Consumer
Perceptions of Service Quality”, Journal of Retailing,
Spring, pp.12-40.
88.Park, T. and Kim, K.J.（1998）,“Determination of an
optimal set of design requirements using house of
quality”, Journal of Operations Management,16, pp.569-581.
89.Partovi , F.Y.（2001）, “ An analytic model to quantify
strategic service vision”, International Journal of
Service Industry Management, 12, 5, pp. 476-500.
90.Peter, J. P. and Olson, J. C. (1996), “ Consumer Behavior
and Marketing Strategy”, Irwin, Illinois.
91.Revelle ,J.B. and Moran ,J.W.and Cox ,C.A.（1998）,“The
QFD Handbook”, John Wiley & Sons, New York.
92.Richardson, P. S., Dick, A. S and Jain, A.K. (1994),
“Extrinsic & intrinsic cue effects on perceptions of store
brand quality,” Journal of Marketing. 58, 4, pp.28-36.
93.Schilling, M.A. and Hill, C.W.(1998) ,“Managing the new
product development process: Strategic imperatives”, The
Academy of Management Execetive, 12,3, pp.67-81.
94.Sethi, R.(2000), “New product quality and product
development teams”, Journal of Marketing, 64, 2, pp.1-15.
95.Shackel, B.（1984）,“The concept of usability”,Prentice-
Hall, NJ, pp. 45–87.
96.Shackel, B.（1986）,“Ergonomics in design for usability”,
Proceedings of the 2nd Conference of Human-Computer
Interaction Specialist Group British Computer Society
,Cambridge University Press, Cambridge.
97.Shaw, N.E. and Hwarng, H.B and Mattos, C.D.(2001),
“Revitalising new process development in the UK fine
chemicals industry”, International Journal of Operations &
Production Management, 21, 8, pp.1133-52.
98.Slinger, M. (1992), “To practice QFD with success requires
a new approach to product design”, Kontinuert Forbedring,
Copenhagen, 20-21 February.
99.Song, X. M. and Parry, M. E.(1996) , “What separates
Japanese new product winners from losers.”, Product
Innovation Management 13, 5, pp. 422-439.
100.Saaty, T. L.（1980）, “The Analytic Hierarchy process”,
Mcgraw-Hill, New York.
101.Stephen, M. N. and Simonson, I. (1997) ,“Attribute-Task
Compatibility as a Determinant of Consumer Preference
Reversals”, Journal of Marketing Research, 34,2, pp.205-
218.
102.Stoll, H.W.(1988), “Design for manufacture”, Tool and
manufacturing engineering handbook,5, pp.131-132.
103.Sung,H.H, and Yun,M. H.and Kwahk, J. and Hong, S.W.(2001),
“Usability of consumer electronic products”,
International Journal of Industrial Ergonomics ,28 ,pp.143–
151.
104.Swift, K.G. and Raines, M. and Booker, J.D. (1999),
“Analysis of product capability at the design stage”,
Journal of Engineering Design, 10, 1, pp. 77-91.
105.Taguchi, G.(1986), “Introduction to qualityengineering”
, Asian productively organization, Dearborn, MI：American
Supplier Institute.
106.Takezawa, N. and Takahashi, M.(1990), “Quality deployment
and reliability deployment”. In Akao, Y. (Ed.) Quality
Function Deployment, Integrating Customer Requirements into
Product Design, Productivity Press, English translation,
Chapter 7, pp. 180-210.
107.Termaat, K. and Sroka, K. and Schmidt, J. and Finkelstein,
S. (1995),“Customer to product quality process”,
Strategic Standards Office, Ford Motor Company, Fairlane
Plaza,Dearborn, MI, 31 January.
108.Tidd, J.and Kirsten, B.(2002), “The influence of project
novelty on the product development process”, R&D management
,32, 21, pp.127-138.
109.Ulrich, K.T. and Eppinger, S.D.(2000) ,“Product design
and development” ,McGraw Hill.
110.Urban, G. and Hauser, J. (1993), “ Design and Marketing
of New Products”, Prentice-Hall, Englewood Cliffs, NJ.
111.Vanegas, L. V. and Labib,A.W.（2000）,“A novel method of
operating on fuzzy numbers in order to find a Fuzzy
Weighted Average (FWA).”, Fuzzy Sets and Systems, submitted
for publication.
112.Van Laarhoven, P. J. M.and Pedrycz, W.（1983）, “A fuzzy
extension of Saaty’s priority theory”, Fuzzy Sets and
Systems, 11, pp.229-241.
113.Wang, J. and Pillay, A.(2003) ,“modified fauilure mode
and effects analysis using approximate reasoning”
Reliality Engiineering and System Safety,79, pp.69-85.
114.Wang, J.（1999）,“Fuzzy outranking approach to prioritize
design requirements in quality function deployment.”
International Journal of Production Research, 37, pp.899-
916.
115.Wirth, R.and Berthold ,B.and Kramer ,A. and Peter,G.
(1996),“Knowledge-based Support of System analysis for the
Analysis of Failure Modes and Effects” Engineering
Applications of Artificial Intelligence, 9, 3, pp.219-229.
116.Woodson, B.T.and Tillman, B.and Tillman, P（1992）,“Human
Factors Design Handbook: Information and Guidelines for the
Design of Systems, Facilities, Equipment, and Products for
Human Use”. McGraw-Hill, New York.
117.Yamakawa,H.and Katsutyama, N.O.M. and Hiroyasu, T.(1997),
“A study on heredity and evolution of designs considering
Kansei by using genetic algorithms”, Proceedings of
International Symposium on Optimization and Innovative
Design, 194, pp.1–9.
118.Yang, J. and Yu, L.(2002),“Electronic new product
development - a conceptual framework”, Industrial
Management + Data Systems, 102, 3/4, pp.218-226.
119.Yang, Y.Q. and Wang, S.Q. and Dulaimi, M. and Low, S.P .
(2003), “A fuzzy quality function deployment system for
buildable design decision-makings”, Automation in
Construction, 12, pp.381-393.
120.Yoshimura ,M. and Yanagi, H.(2001), “Strategies for
implementing aesthetic factors in product designs”,
International Journal of Production Research, 39, 5,
pp.1031–1049.
121.Zaccai, G.(1994) , “The New DFM: Design for Marketability
”, World Class Design to Manufacture, 1 ,6,
pp. 5-11.
122.Zairi, M. and Youssef, M.A.(1995), “Quality function
deployment”, International Journal of Quality &
Reliability Management,12, 6, pp.9-23.
123.Zeithaml, V. A. (1988), “Consumer Perceptions of Price,
Quality, and Value: A Means-End Model and Synthesis of
Evidence”, Journal of Marketing,52, July, pp.2-22.
124.Zhang, Q.(2001), “Quality dimensions, perspectives and
practices: A mapping analysis”, The International Journal
of Quality & Reliability Management.18, 6/7, pp.708-722.
125.Zhou,M.（1998）,“Fuzzy logic based models for quality
planning and improvement.”, ASME Conference: Intelligent
Engineering Systems through Artificial Neural Networks, 7,
pp.311-316.
126.Zirger,B.J. and Hartley,L.(1996 ), “ The effect of
accelerating techniques on product development time. IEEE
Transactions on Engineering Management ,43,2, pp.143-152.
127.大紀元：2003/11/15 http://www.infopro.com.tw/
128.acer：http://www.acer.com.tw/
129.Dell：http://www1.ap.dell.com/content/
130.HP：http://www.hp.com/country/tw/zh/welcome.html
131.IBM：http://www.ibm.com/tw/
132.IDC：2004/3/15 http://www.idc.com.tw/
133.TOSHIBA：http://www.toshiba-taiwan.com/