中文論文【CS】
CS01 曾俊達 「台灣建材品質管理機制之研究」 成功大學博士論文 2002CS02 黃英忠 「現代管理學」四版 華泰書局 2003
CS03 內政部建築研究所,「2011年智慧建築評估手冊」 2011
CS04 荒川弘熙 著、葉珠娟 譯「RFID是啥」 向上出版 2005
CS05 陳宏宇編著 「RFID無線射頻辨識系統入門」 松崗出版 2006
CS06 宋清貴 「RFID 應用於物流中心之研究」,國立交通大學運輸科技與管理學系碩士論文,2004CS07 林祐正等 「整合RFID技術於營建供應鏈管理系統應用之研究」 國立臺北科技大學土木工程系 2007
CS08 謝佑明、鄭明淵等 「營建管理進行RFID技術在開放式住宅整建系統之應用研究」 內政部建築研究所研究報告 2011
CS09 李玉生、王隆昌等 「無線射頻辨識 (RFID)應用於新建建築物生產履歷之應用研究」內政部建築研究所研究報告 2011
CS10 陳炳煇、李達生、陳筱青等 「空調設備普用節能控制設備開發 與 RFID 技術實現自主式用電管理」 國立台灣大學 2011
CS11 許俊萍、詹家泰等 「智慧型RFID系統應用於提升老人居家生活品質」 國立陽明大學醫學工程研究所 2010
CS12黃耀榮等 「應用RFID追蹤失智老人遊走行為及探討環境安全設施」 國立雲林科技大學建築與室內設計系暨研究所 2013
CS13 鄭辰仰等 「無線射頻辨識(RFID)定位演算法於製造現場監控之研究」東海大學工業工程與經營資訊學系 2011
CS14 曾仁杰等 「RFID 追蹤技術應用於空間配置模擬及最佳化」 國立交通大學土木工程學系 2013
CS15.何明錦、柯千禾等 「無線射頻辨識(RFID)於設施與設備維護管理之應用研究(III)─三維空間定位模組強化」 內政部建築研究所 2009
CS16 鄭明淵等 「無線射頻辦識RFID於建築生命週期之應用(三)—開放式建築(MEGA house)示範屋」內政部建築研究所 2009
CS17 林杰宏、黃榮堯等 「無線射頻辨識技術(RFID)於建築餘土之流向管控應用推動計畫」內政部建築研究所 2009
CS17 楊成發等 「物件互聯網之 RFID 天線與電波傳播特性研究」 國立台灣科技大學電機工程系 2011
CS18 盧婉雯「模糊理論在RFID碰撞問題之應用」立德大學資訊工程研究所碩士論文 2009CS19 中華民國102年6月14日國家通訊傳播委員會通傳資技字第10243021200號令
CS20 http://people.debian.org.tw/~chihchun/2006/07/04/mobile-barcode/
CS21 http://www.syscom.com.tw/ePaper_Content_EPArticledetail.aspx?id=343&EPID=190&j=3&HeaderName=研發新視界
CS22 鄭可偉,無線射頻辨識(RFID)技術應用於開放式建築生命週期之研究,國立台灣科技大學營建工程系碩士論文,2007CS23 梁家郡,RFID技術應用於RC建築構建之研究,國立台北科技大學土木與防災研究所碩士論文,2008CS24 徐建淙,無線射頻辨識技術(RFID〉於工地施工管理與人員安全維護之研究,國立台灣科技大學營建工程系碩士論文,2008CS25 林柏碩,RFID預埋於營建廢棄物流向追蹤之技術可行性研究,國立中央大學營建管理研究所碩士論文,2007CS26 林仙珠,無線射頻辨識技術(RFID)應用於營造場安全監控系統之研究,國立中央大學環境工程研究所碩士論文,2008CS27 簡宗瑋,適用於無線射頻辨識系統之室內訂位演算法,國立臺灣海洋大學電機工程學系碩士論文,2006CS28 鄭翔倫,無線射頻辨識系統在營建工地人、機、料管理應用之探討,中華大學營建管理研究所碩士論文,2005CS29 蔡孟涵,RFID於營建施工的應用研究-以預鑄生產管理系統為例,臺灣大學土木工程學研究所碩士論文,2006CS30 呂芫逢,無線射頻辨識技術(RFID)應用於混凝土電子化管理之研究,國立台北科技大學土木與防災研究所碩士論文,2006CS31 陳威年,無線射頻辨識技術(RFID)技術應用於開放式建築使用維護階段之研究,國立臺灣科技大學營建工程系碩士論文,2006CS32 廖軒邑,RFID應用於RC構件施工性之研究,國立台北科技大學土木與防災研究所,2007
CS33 李靜雯,建構RFID混凝土試體檢驗資訊管理系統之研究,國立台北科技大學土木與防災研究所,2007
CS34 江逸章,無線射頻辨識系統(RFID)與綠建材現地評估體系結合之研究,立德管理學院資源環境研究所碩士論文,96年7月CS35葉世文、鄭明淵、吳榮元、陳威年,無線射頻辨識技術(RFID)於建築產業應用之研究,內政部建築研究所,2005
CS36 石豐銘,無線射頻識別於營建業之應用,土木水利 第32卷 第3期,2005
CS37 陳瑞順,RFID概論與應用,全華圖書, 2007
CS38 岸上順一 著,溫榮弘 譯,圖解RFID,全華科技圖書股份有限公司,2006
CS39 Steven Shepard 著,林婉如 譯,RFID無線射頻識別系統,2008
CS40 社團法人日本自動認識システム協會 著,刁建成 譯,RFID原理與應用,2005
西文文獻【EB】
EB01 F. Taylor, Scientific Management, New York: Harper & Row, 1947; E. Locke, “The Ideas of Frederick Taylor: An Evaluation, Academy of Management Review, 1982, 7:14-24.
EB02 October, 1997Approved as AIM International (Automatic Identification Manufacturers International) standard (ISS - QR Code)
EB03 March, 1998Approved as JEIDA (Japanese Electronic Industry Development Association) standard (JEIDA-55)
EB04 January, 1999Approved as JIS (Japanese Industrial Standards) standard (JIS X 0510)
EB05 June, 2000Approved as ISO international standard (ISO/IEC18004)
EB06 Rhea Wessel 「RFID Helps Control and Organize Construction Sites」, RFID Journal, July 2010
EB07 Marco Mamei, Renzo Quaglieri, Franco Zambonelli 「Making Tuple Spaces Physical with RFID Tags」 SAC '06 Proceedings of the 2006 ACM symposium on Applied computing Pages 434-439 ACM New York, NY, USA, 2006
EB08 Hon Ng, Wilton Fok, Edward Wong, Zong wei Luo 「Quality Management using RFID and Third Generation Mobile Communications Systems」IEEE International Conference on e-Business Engineering (ICEBE'06)
EB09 Soungho Chae, Tomohiro Yoshida 「Application of RFID technology to prevention of collision accident with heavy equipment」 Automation in Construction Vol.19 368–374,2010
EB10 Agnes Kelma, Lars Laußat, Anica Meins-Becker, Daniel Platz, Mohammad J. Khazaee, Aaron M. Costin, Manfred Helmus, Jochen Teizer 「Mobile passive Radio Frequency Identification (RFID) portal for automated and rapid control of Personal Protective Equipment (PPE) on construction sites」Automation in Construction Vol. 36 38–52, 2013
EB11 Ali Montaser, Osama Moselhi 「RFID indoor location identification for construction projects」 Automation in Construction Vol. 39 167–179, 2014
EB12 Weisheng Lu, George Q, Huang, Heng Li 「Scenarios for applying RFID technology in construction project management」Automation in Construction Vol. 20 101–106, 2011
EB13 Chien-Ho Ko, RFID 3D location sensing algorithms, February 2010
EB14 AIM, 2001. Shrouds of time: The history of RFID. Version 1.0, Association for Automation Identification and Data Capture Technologies, Pittsburgh, PA., USA., October 1, 2001.
EB15 Chae, S. and T. Yoshida, 2010. Application of RFID technology to prevention of collision accident with heavy equipment. Autom. Constr., 19: 368-374.
EB16 Chen, Z., H. Li and C.T.C. Wong, 2002. An application of bar-code system for reducing construction wastes. Autom. Constr., 11: 521-533.
EB17 Chien, H.Y. and C.S. Laih, 2009. ECC-based lightweight authentication protocol with untraceability for low-cost RFID. J. Parallel Distrib. Comput., 69: 848-853.
EB18 Domdouzis, K., B. Kumar and C. Anumba, 2007. Radio-Frequency Identification (RFID) applications: A brief introduction. Adv. Eng. Inform., 21: 350-355.
EB19 Ferrer, G., S.K. Heath and N. Dew, 2011. An RFID application in large job shop remanufacturing operations. Int. J. Prod. Econ., 133: 612-621.
EB20 Goodrum, P.M., M.A. McLaren and A. Durfee, 2006. The application of active radio frequency identification technology for tool tracking on construction job sites. Autom. Constr., 15: 292-302.
EB21 Huang, H.P. and Y.T. Chang, 2011. Optimal layout and deployment for RFID systems. Adv. Eng. Inform., 25: 4-10.
EB22 Kim, J., K. Tang, S. Kumara, S.T. Yee and J. Tew, 2008. Value analysis of location-enabled radio-frequency identification information on delivery chain performance. Int. J. Prod. Econ., 112: 403-415.
EB23 Ko, C.H., 2010. RFID 3D location sensing algorithms. Autom. Constr., 19: 588-595.
EB24 Landt, J., 2005. The history of RFID. IEEE Potentials, 24: 8-11.
EB25 Lu, W.S., G.Q. Huang and H. Li, 2011. Scenarios for applying RFID technology in construction project management. Autom. Constr., 20: 101-106.
EB26 McCarthy, J.F., D.H. Nguyen, A.M. Rashid and S. Soroczak, 2003. Proactive displays and the experience ubicomp project. Proceedings of the 5th International Conference on Ubiquitous Computing, October 12-15, 2003, Seattle, Washington, pp: 78-81.
EB27 Papapostolou, A. and H. Chaouchi, 2011. RFID-assisted indoor localization and the impact of interference on its performance. Applications, 34: 902-913.
EB28 Razavi, S.N. and C.T. Haas, 2011. Using reference RFID tags for calibrating the estimated locations of construction materials. Autom. Constr., 20: 677-685.
EB29 Roh, J.J., A. Kunnathur and M. Tarafdar, 2009. Classification of RFID adoption: An expected benefits approach. Inform. Manage., 46: 357-363.
EB30 Ruiz-Garcia, L. and L. Lunadei, 2011. The role of RFID in agriculture: Applications, limitations and challenges. Comput. Electron. Agric., 79: 42-50.
EB31 Song, J., C.T. Haas, C. Caldas, E. Ergen and B. Akinci, 2006. Automating the task of tracking the delivery and receipt of fabricated pipe spools in industrial projects. Autom. Constr., 15: 166-177.
EB32 Stockman, H., 1948. Communication by means of reflected power. Proc. IRE, 36: 1196-1204.
EB33 Tajima, M., 2007. Strategic value of RFID in supply chain management. J. Purchas. Supply Manage., 13: 261-273.
EB34 Tzeng, C.T., Y.C. Chiang, C.M. Chiang and C.M. Lai, 2008. Combination of Radio Frequency Identification (RFID) and field verification tests of interior decorating materials. Autom. Constr., 18: 16-23.
EB35 Umetani, T., T. Arai, Y. Mae, K. Inoue and J. Maeda, 2006. Construction automation based on parts and packets unification. Autom. Constr., 15: 777-784.
EB36 Wang, L.C., 2008. Enhancing construction quality inspection and management using RFID technology. Autom. Constr., 17: 467-479.
EB37 Ward, M. and R. van Kranenburg, 2006. RFID: Frequency, standards, adoption and innovation. JISC Technology and Standards Watch, May 2006, pp: 1-36. http://www.jisc.ac.uk/uploaded_documents/TSW0602.pdf.
EB38 Xiaohua, C. and X. Hanbin, 2011. Propagation prediction model and performance analysis of RFID system under metallic container production circumstance. Microelectr. J., 42: 247-252.
EB39 Yagi, J., E. Arai and T. Arai, 2005. Parts and packets unification Radio Frequency Identification (RFID) application for construction. Autom. Constr., 14: 477-490.