|
References:
1. Kang, T. H.-K; Shin, M.; Mitra, N.; and Bonacci, J. F., “Seismic Design of Reinforced Concrete Beam – Column Joints with Headed Bars,” ACI Structural Journal, V. 106, No.5, Nov.-Dec. 2009, pp. 868-877. 2. Paulay, T.; and Priestley, M. J. N., “Seismic Design of Reinforced Concrete and Masonry Buildings,” John Wiley &; Sons, Inc., 1992. 3. Chun, S. C.; Lee, S. H.; Kang, T. H.-K.; Oh, B.; and Wallace, J. W., “Mechanical Anchorage in Exterior Beam – Column Joints Subjected to Cyclic Loading,” ACI Structural Journal, Vol. 104, No.1, Jan.-Feb. 2007, pp. 102-113. 4. Thompson, M. K.; Ziehl, M. J.; Jirsa, J. O.; and Breen, J. E., “CCT Nodes Anchored by Headed Bars – Part 1: Behavior of Nodes,” ACI Structural Journal, Vol. 102, No. 6, Nov.-Dec. 2005, pp. 808-815. 5. Thompson, M. K.; Jirsa, J. O.; and Breen, J. E., “Behavior and Capacity of Headed Reinforcement,” ACI Structural Journal, Vol. 103, No. 4, July-Aug. 2006, pp. 522-530. 6. Thompson, M. K.; Ledesma, A.; Jirsa, J. O.; and Breen, J. E., “Lap Splices Anchored by Headed Bars,” ACI Structural Journal, Vol. 103, No. 2, Mar.-Apr. 2006, pp. 271-279. 7. DeVries, R. A.; Jirsa, J. O.; and Bashandy, T., “Effects of Transverse Reinforcement and Bonded Length on the Side-Blowout Capacity of Headed Reinforcement,” ACI Structural Journal, Vol.180, No.16, Sept-Oct. 1998, pp. 367-390. 8. DeVries, R. A.; Jirsa, J. O.; and Bashandy, T., “Anchorage Capacity in Concrete of Headed Reinforcement with Shallow Embedments,” ACI Structural Journal, Vol. 96, No. 5, Sept.-Oct. 1999, pp. 65-73. 9. DeVries, R. A.; Jirsa, J. O.; and Bashandy, T., “Effects of Transverse Reinforcement and Bonded Length on the Side-Blowout Capacity of Headed Reinforcement,” ACI Structural Journal, Vol. 180, Sept.-Oct. 1998, pp.367-390. 10 Fuchs, W.; Eligehausen, R.; and Breen, J.E., “Concrete Capacity Design (CCD) Approach for Fastening to Concrete,” ACI Structural Journal, Vol. 92, No. 1, Jan.-Feb.1995, pp. 73-94. 11. Joint ACI–ASCE Committee 352, “Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structures (ACI352R-02),” American Concrete Institute, Farmington Hills, MI, 2002. 12. ASTM A970/A970M – 13a, “Standard Specification for Headed Steel Bars for Concrete Reinforcement,” ASTM International, West Conshohocken, PA, 2013. 13. Bashandy, T. R., “Application of Headed Bars in Concrete Members,” PhD Dissertation, the University of Texas at Austin, Austin, Texas, Dec. 1996. 14.Wallace, J.W.; McConnel, S.W.; Gupta, P.; and Cote, P. A., “Use of Headed Reinforcement in Beam – Column Joints Subjected to Earthquake Loads,” ACI Structural Journal, Vol. 95, No. 5, Sept.-Oct. 1998, pp. 590-606. 15. Hasselwander, G; Jirsa, O.; and Breen, J. E., “Strength and Behavior of Single Cast-in-Place Anchor Bolts Subjected to Tension,” ACI Structural Journal, Vol. 103, Sept.-Oct. 1987, pp. 203-232. 16. DeVries, R. A., “Anchorage of Headed Reinforcement in Concrete,” PhD Dissertation, the University of Texas at Austin, Austin, Texas, Dec. 1996. 17. Furche, J, and Eligehausen, R., “Lateral Blowout Failure of Headed Studs Near a Free Edge,” ACI Structural Journal, Vol. 130, Jan.-Feb. 1991, pp. 235-252. 18. Jirsa, J. O., and Marques J. L., “Study of Hooked Bar Anchorages in Beam – Column Joints,” ACI Structural Journal, Vol. 72, No. 5, May 1975, pp. 198-209. 19. Untrauer, R. E., and Henry, R. L., “Influence of Normal Pressure on Bond Strength,” ACI Structural Journal, Vol. 62, No. 5, pp. 577-586. 20. Li, W.-Y., “Experimental Study of Reinforced Concrete Beam Bars with Headed Anchorage in Beam – Column Connections,” Master Thesis, National Taiwan University, Taipei, Taiwan, June 2013. 21. Murakami, M., and Kubota T., “Mechanical Anchorage of Main Bars in Beam – Column Joints,” Proceedings of the Architectural Institute of Japan, Aug. 1995, pp. 99-102. (in Japanese) 22. American Concrete Institute (ACI) Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary,” American Concrete Institute, Farmington Hills, MI, 2011. 23. American Concrete Institute (ACI) Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (Draft),” American Concrete Institute, Farmington Hills, MI, 2014. 24. Thompson, M. K.; Jirsa, J. O.; and Breen, J. E., “CCT Nodes Anchored by Headed Bars – Part 2: Capacity of Nodes,” ACI Structural Journal, Vol. 103, No. 1, Jan.-Feb. 2006, pp. 65-73. 25. Sugai, K.; Maratu, M.; and Nagai, S., “Study on R/C Interior Beam-Column Joints Using Headed Beam Rebars,” Proceedings of the Architectural Institute of Japan, Aug. 2004, pp. 795-798. (in Japanese) 26. Lin, K.-C., and Chen, Z.Y., “Anchorage Behavior of T Headed Reinforcements in Beam-Column Connections,” Proceedings of the Tenth National Conference on Structural Engineering, Tao-Yuan, Taiwan, Dec. 2011, No. 277. 27. Lee, H.-J., and Xu, J.-H., “Experimental Study on the Mechanical Anchorage for Precast Concrete Beam Bottom Bars in Cast-in-Place Beam-Column Connections,” Proceedings of the Tenth National Conference on Structural Engineering, Tao-Yuan, Taiwan, Dec. 2010, No. 294. 28. Liang, G.-W., “Anchorage Behavior of Headed Bar in Beam-Column Joint,” Master Thesis, National Taiwan University of Science and Technology, Taipei, Taiwan, June 2012. 29. Maeda, Y.; Nagai, S.; and Maruto, M., “Experimental Study on R/C Interior Beam-Column Joints using Headed Beam Rebars,” Proceedings of the Architectural Institute of Japan, Aug. 2004, pp. 799-800. (in Japanese) 30. Imeda, T.; Hayashi, K.; Irisawa, I.; Tanaka, K.; and Arai, N., “Experimental Study on Mechanical Anchor in Beam-Column Joints of RC Exterior Subassemblages,” Proceedings of the Architectural Institute of Japan, Sept. 1998, pp. 541-542. (in Japanese) 31. Nakatani, S.; Shibata, K.; Watanabe, N.; and Imai, H., “Experimental Study on Mechanical Anchorage in Beam-Column Joints of RC Exterior Subassemblages,” Proceedings of the Architectural Institute of Japan, Sept. 1999, pp. 531-536. (in Japanese) 32. Yoshida, J.; Ishibashi, K.; and Nakamura, K. “Experimental Study on Mechanical Anchorage Using Bolt and Nut in Exterior Beam-Column Joints,” Proceedings of the Architectural Institute of Japan, Sept. 2000, pp.635-638. (in Japanese) 33. Takeuchi, H.; Kishimoto, T.; Hattori, S.; Nakamura, K.; Hosoya, H.; and Ichikawa, M.; “Development of Mechanical Anchorage Used Circular Anchor Plate,” Proceedings of the Architectural Institute of Japan, Aug. 2002, pp.565-566. (in Japanese) 34. Imai, H.; Hasegawa, K.; and Kikai, M., “Experimental Study on the Structural Performance of Mechanical Anchorage in Beam-Column Joints of RC Exterior Subassemblages,” Proceedings of the Architectural Institute of Japan, Sept. 2003, pp. 561-566. (in Japanese) 35. Hara, T.; Watanabe, H.; Kosaka, H.; Hattori, A.; Komuro, T.; and Kai, T., “Structural Performance on RC Beam-Column Joints Using Ultra High Strength Materials,” Proceedings of the Architectural Institute of Japan, Sept. 2005, pp. 241-244. (in Japanese) 36. Kiyohara, T.; Hasegawa, Y.; Fujimoto, T.; Akane, J.; Amemiya, M.; Tasai, A.; and Adachi, T., “Seismic Performance of High Strength RC Exterior Beam Column Joint with Beam Main Bars Anchored Mechanically,” Proceedings of the Architectural Institute of Japan, Sept. 2005, pp.33-42. (in Japanese) 37. Kato, T., “Mechanical Anchorage Using Anchor Plate for Beam Column Joints of R/C Frames,” Proceedings of the Architectural Institute of Japan, Sept. 2005, pp. 277-278. (in Japanese) 38. Adachi, M.; Masuo, K.; and Imanishi, T., “Ultimate Strength of R/C Exterior Beam-Column Joint Using Mechanical Anchorage for Beam Reinforcement USD590 (Part 2: Experiment on Shear Strength of Beam-Column Joint),” Proceedings of the Architectural Institute of Japan, Sept. 2006, pp. 27-28. (in Japanese) 39. Adachi, M., and Masuo, K., “The effect of Orthogonal Beams on Ultimate Strength of R/C Beam-Column Joint Using Mechanical Anchorages,” Proceedings of the Architectural Institute of Japan, Aug. 2007, pp. 633-634. (in Japanese) 40. Tazaki, W.; Kusuhara, F.; and Shiohara, H., “Tests of R/C Beam-Column Joints with Irregular Details on Anchorage of Beam Longitudinal Bars,” Proceedings of the Architectural Institute of Japan, Aug. 2007, pp. 653-656. (in Japanese) 41. Nazakawa, H.; Kumagai, H.; Saito, H.; Kurose, Y.; and Yabe, Y., “Development on the Ultra-High-Strength Reinforced Concrete Structure,” Proceedings of the Architectural Institute of Japan, Aug. 2007, pp. 653-656. (in Japanese) 42. Fujiwara, K.; Kusuhara, F.; Shiohara, H.; Tajiri, S.; and Fukuyama, H., “Experimental Study on Effects of Design Parameters on Seismic Performance of Exterior R/C Beam-Column Joints (Part 2: Effects of Moment Capacity Ratio of Column to Beam),” Proceedings of the Architectural Institute of Japan, Sept. 2010, pp. 393-394. (in Japanese) 43. Asai, Y.; Kim, S.; Kusuhara, F.; Shiohara, H.; Tajiri, S.; and Fukuyama, H., “Experimental Study on Effects of Design Parameters on Seismic Performance of Exterior R/C Beam-Column Joints (Part 3: Effects of Lateral Reinforcement),” Proceedings of the Architectural Institute of Japan, Sept. 2010, pp. 395-396. (in Japanese) 44. Kim, S.; Asai, Y.; Kusuhara, F.; Shiohara, H; Tajiri, S.; and Fukuyama, H., “Experimental Study on Effects of Design Parameters on Seismic Performance of Exterior R/C Beam-Column Joints (Part 4: Effects of Joints Aspect Ratio and Beam-Bent Bar Anchorage),” Proceedings of the Architectural Institute of Japan, Sept. 2010, pp. 397-398. (in Japanese) 45. Lee, H.-J., and Yu, S.-Y., “Cyclic Response of Exterior Beam – Column Joints with Different Anchorage Methods,” ACI Structural Journal, V. 106, No. 3, May-June 2009, pp. 329-339. 46. Kang, T. H.-K.; Ha, S.-S.; and Choi, D.-U, “Seismic Assessment of Beam-to-Column Interactions Utilizing Headed Bars,” Proceedings of the 14WCEE, Beijing, China, Oct. 2008. 47. Ishibashi, K., and Inokuchi, R., “Experimental Study of T-Shaped Joints with Anchor-Heads on Columns’ Rebars – Part 3 and Part 4,” Proceedings of the Architectural Institute of Japan, Aug. 2004, pp. 819-822. (in Japanese) 48. Ishiwata, Y.; Hattori, S.; Ichikawa, M.; Takeuchi, Hiroyuki, ; Nakamur, K.; and Kayakawa, K., “Development of Mechanical Anchorage used Circular Anchor Plate,” Proceedings of the Architectural Institute of Japan, Aug. 2002, pp. 563-566. (in Japanese) 49. Gotoh, Y.; Takahashi, A.; Morofushi, T.; Nakamura, K.; Kusunoki, K.; and Tasai, A., “Experimental Study on the Hysteric Characteristic of RC T-Shape Beam-Column Joint Using Mechanical Anchor RC Bars,” Proceedings of the Architectural Institute of Japan, Sept. 2008, pp. 151-152. (in Japanese) 50. Matsushima, M.; Kuramoto, H.; Maeda, M.; Shindo, K.; and Ozone, S., “Test on Corner Beam-Column Joint under Tri-Axial Loadings,” Proceedings of the Architectural Institute of Japan, Sept.2000, pp. 861-863. (in Japanese) 51. Tasai, A.; Kawakatsu, K.; Kiyohara, T.; and Murakami, M., “Shear Performance of Exterior Beam Column Joint with Beam Main Bars Anchored Mechanically,” Proceedings of the Architectural Institute of Japan, Sept. 2000, pp. 857-860. (in Japanese) 52. Masuo, K.; Adachi, M.; and Imanishi, T., “Ultimate Strength of R/C Exterior Beam-Column Joint Using Mechanical Anchorage for Beam Reinforced USD590,” Proceedings of the Architectural Institute of Japan, Sept. 2006, pp.25-28. (in Japanese) 53. Kiyohara, T.; Tasai, A.; Watanabe, K.; Hasegawa, Y.; and Fujimoto, T., “Seismic Capacity of High Strength RC Exterior Beam Column Joint with Beam Main Bars Anchored Mechanically,” Proceedings of the Architectural Institute of Japan, Aug. 2004, pp.27-34. (in Japanese) 54. Ishibashi, K.; Inokuchi, R.; Ono, H.; and Masuo, K. “Experimental Study on T-Shaped Beam-Column Joints with Anchor-Heads on Columns’ Rebars – Part 1 and Part 2,” Proceedings of the Architectural Institute of Japan, Sept. 2003, pp. 533-536. (in Japanese) 55. American Concrete Institute (ACI) Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary,” American Concrete Institute, Farmington Hills, MI, 2008. 56. Mander, J. B.; Priestly, M. J. N.; and Park, R., “Theoretical Stress-Strain Model for Confined Concrete,” ASCE Structural Engineering Journal, Vol. 114, No. 8, Sept. 1988, pp. 1804-1826. 57. Razvi, S., and Murat, S., “Confinement Model for High-Strength Concrete,” ASCE Structural Engineering Journal, Vol. 125, No.3, March 1999, pp. 281-289. 58. American Concrete Institute (ACI) Committee 318B, “CB010 – proposed provisions for headed reinforcing bars,” American Concrete Institute,Farmington Hills, MI, 2006.
|