[1]許坤明著,非傳統加工,全華圖書有限公司,2011。
[2]井上潔原著,黃錦鐘譯,放電加工,高立圖書有限公司,1998。
[3]許坤明(2004), 超音波輔助放電磨削複合加工之研究, 國立虎尾科技大學機械製造工程系。
[4]吳政憲、許文政、張致遠、歐士輔編著,模具概論,社團法人中華民國模具技術發展學會,2014。
[5]許坤明(2004), “超音波輔助放電磨削複合加工之研究”, 國立虎尾科技大學機械製造工程系。
[6]林楠盛,放電加工技術之應用理論與實務,機械工業雜誌,第257-274頁, 1991。[7]E.J. Weller著,張浮明、張瑞慶、周志中編譯,非傳統加工,高立圖書有限公司,2008。
[8] T.B. Thoe, D.K. Aspinwall (1999), N. Killey “Combined ultrasonic and electrical discharge machining of ceramic coated nickel alloy” , Int.Journal of Machine Tools and Manufacture. Journal of Materials Processing Technology 92-93 323-328.
[9] Q.H Zhang,J.H Zhang,J.X Deng,Y Qin,Z.W Niu (2002)” Ultrasonic vibration electrical discharge machining in gas” Journal of Materials Processing Technology , Volume 129, Issues 1–3, pp.135–138.
[10] 石煥讓、許坤明、李佳駿、吳瑞軒”超音波輔助銅基複合材料電極對高硬度材料放電研磨之探討”,中國機械工程學會第22屆全國學術研討會論文集,編號:D6-046。
[11] 閻鵬、張建華、張洪麗、白文峰”超音波振動輔助磨削脈衝放電複合加工工藝研究”,中國機械工程第19卷第16期2008年8月下半月。
[12] MT Shervani.Tabar, MR Shabgard (2010)” Numerical study on the effect of the frequency and amplitude of the tool on the material removal rate in ultrasonic.assisted electrical discharge machiningg” Proc. IMechE Vol. 225 Part B: J. Engineering Manufacture. Vol. 225 .pp.408-413.
[13] Gunawan Setia Prihandana, Muslim Mahardika, M. Hamdi and Kimiyuki Mitsui (2011)” Effect of low-frequency vibration on workpiece in EDM processes” Journal of Mechanical Science and Technology 25 (5) 1231~1234
[14] Vineet Srivastava, Pulak M. Pandey (2012) “Effect of process parameters on the perform”, Journal of Manufacturing Processes 14 (2012) 393–402.
[15] Jim Wang, Fuzhu Han, Gang Cheng, Fuling Zhao (2012)” Debris and bubble movements during electrical discharge machining”, International Journal of Machine Tools & Manufacture 58 11-18.
[16] Yanzhen Zhang, Yonghong Liu, Renjie Ji, Cao Zheng ,Yang Shen, Xiaolong Wang (2013)” Transient dynamics simulation of the electrical discharge-generated bubble in sinking EDM”, Int J Adv Manuf Technol 68:1707–1715.
[17] H. Gotoha, T. Tania, M. Okada , A. Goto, T. Masuzawa, N. Mohri ( 2013 ) “Wire electrical discharge milling using a wire guide with reciprocating rotation”, Procedia CIRP 6 199 – 202.
[18] Vineet Srivastava, Pulak M. Pandey (2013), “Study of ultrasonic assisted cryogenically cooled EDM process using sintered (Cu–TiC) tooltip”, Journal of Manufacturing Processes, Vol 15, pp.158–166.
[19] Y.S. Liao, P.S. Wu, F.Y. Liang ( 2013 ) “Study of debris exclusion effect in linear motor equipped die-sinking EDM process “Procedia CIRP 6 123 – 128.
[20] Jim Wang, Fuzhu Han (2014)” Simulation model of debris and bubble movement in consecutive-pulse discharge of electrical discharge machining”, International Journal of Machine Tools & Manufacture 77 56–65.
[21] 許文政、王振宇(2014)”迴轉超音波輔助放電加工之田口法優化加工性能實驗”,中國機械工程學會第三十一屆全國學術研討會論文集,編號:00616。
[22] Tomoo Kitamuraa, Masanori Kunieda, Kohzoh Abe(2014) ” Observation of relationship between bubbles and discharge locationsin EDM using transparent electrodes” Precision Engineering 40 26–32.