王茂駿，王明揚，林昱呈，「台灣地區人體計測資料庫手冊」，中華民國人因工程學會，新竹(2002)。
行政院勞委會勞工安全衛生研究所，「台灣地區勞工人體計測資料庫」，臺北(1990)。
李正隆，「勞工下背痛預防研究-三度空間動態評估模式之建立」，勞工安全衛生研究所研究報告，IOSH84-H323，臺北(1995)。
李正隆、林彥輝，「勞工下背痛預防研究-三度空間動態評估模式驗證」，勞工安全衛生研究所研究報告，IOSH85-H323，臺北(1996)。
李開偉，實用人因工程學，第二版，全華科技圖書股份有限公司，臺北 (2003)。
吳水丕、許芳榮，「非對稱提舉方式對於男性提舉能力之效應」，勞工安全衛生研究季刊，第11卷第4期，第251-260頁(1996)。吳水丕、許芳榮，「非對稱提舉方式對男性提舉能力之效應」，勞工安全衛生研究季刊，第11卷第4期，頁251-260 (2003)。林久翔，「抬舉速度生理成本之研究」，行政院國家科學委員會專題研究計畫成果報告(NSC92-2213-E-033-021)，臺北(2003)。
林久翔、王順正、陳志勇、葉文裕，「人工物料搬運作業分析與評估：實地研究」，勞工安全衛生研究季刊，第8卷第3期，頁285-298 (2000)。
莊舜弘，「日益頻繁的職業疾病：職業性肌肉骨骼傷害」，勞工安全衛生簡訊第75期，臺北(2006)。
張嘉玫，「理容業上肢肌肉骨骼危害暴露量化分析」，碩士論文，朝陽科技大學工業工程與管理系，臺中(2007)。許勝雄、彭游、吳水丕，人因工程第三版，滄海書局，台北 (2004)。
陳志勇、陳協慶，「上肢重複性傷害危險因子現場監測技術開發」，勞工安全衛生研究所研究報告，IOSH91-H345，臺北(2002)。陳秋蓉，「世界主要國家職業災害統計分析(三)」，勞工安全衛生研究所研究報告，IOSH90-M323，臺北(2002)。
陳育慧，「物料箱之握把角度設計研究」，碩士論文，華梵大學工業工程與經營資訊學系，臺北 (2005)。游志雲，「手腕部施力資料值規範」，勞工安全衛生研究所研究報告，IOSH89-H122，臺北(2000)。
黃正龍，「輔助搬運背帶對抬舉瞬間手部施力之影響」，碩士論文，中原大學工業工程學系，桃園(2001)。黃俊祺，2001；“小波理論應用於航太訊號之即時分析研究”，國立台灣大學造船及海洋工程學研究所碩士論文。鄔慎智等人翻譯，人因工程，高立出版, (Kroemer and Grandjean,1997,Fitting the Task to the Human,5/E,Taylor&Francis.) (1999)
廖欣怡，「作業面高度對於勞工上肢重複性作業之生理負荷評估」，碩士論文，朝陽科技大學工業工程與管理系，臺中(2004)。蔡秉昇，「負重移動角度、抬舉高度與頻率對非對稱抬舉能力影響之研究」，碩士論文，華梵大學工業管理學系，臺北 (2002)。鄭誠功、林燕慧、葉文裕、陳志勇，「下背痛之生物力學評估與預防：以鞋廠從業人員為例」，勞工安全衛生研究季刊，第11卷第1期，頁45-52 (2003)。應宜雄、陳志勇，「以生物力學法評估勞工下背傷害之研究—檢核表之製作」，勞工安全衛生研究所研究報告，IOSH87-H334，臺北(2001)。
戴基福、楊瑞鐘、葉文裕，「受雇者工作環境安全衛生狀況認知調查」，勞工安全衛生研究所研究報告，IOSH90-H304，臺北(2001)。
Ayoub, M., and Mital, A., Manual materials handling, London: Taylor & Francis(1989).
Basmajian, J.V., De Luca, Muscles Alive: Their functions revealed by electromyography 5th Edition. Williams and Wilkins, Baltimore U.S.A (1985).
Bautista, M.A., de Arellano-Lopez, A.R., Martinez-Fernandez, J., Bravo-Leon A., and Lopez-Cepero J.M., “Optimization of the fabrication process for medium density fiberboard (MDF)-based biomimetic SiC”, Int. Journal of Refractory Metals & Hard Materials, Vol.27, pp. 431-437 (2009).
Bernard, T.M., Ayoub, M.M., and Lin, C.J., “Evaluation of a biomechanical simulation model for sagittal plane lifting”, International Journal of Industrial Ergonomics, Vol. 24, pp. 157-171 (1999).
Burton, A.K., “Spinal strain from shopping bags with and without handles”, Applied Ergonomics, Vol.17, No.1, pp. 19-23 (1986).
Chaffin, D.B., Andersson, B.J. and Martin, B.J., “Occupational Biomechanics.” Third edition, Wiley Interscence, pp. 339-348 (1999)
Chen, H.J., Lin, C.J., and Huang, C.L. “Effects of a new industrial lifting belt on back muscular activity, hand force, and body stability during symmetric lifting”, Industrial Health, Vol.44, pp. 493–502 (2003).
Chen, Y.L., “Changes in lifting dynamics after localized arm fatigue”, International Journal of Industrial Ergonomics, Vol. 25, pp. 611-619 (2000).
Cheng, C.-K., Chen, H.-H., Kuo, H.-H., Lee, C.-L., Chen, W.-J., Liu, C.-L.,“A three-dimensional mathematical model for predicting spinal joint force distribution during manual liftings”, Clinical Biomechanics, Vol.13, Supplement No. 1, pp. s59-s64(1998)
Chung, H.C., Wang, M.J., “The effects of container design and stair climbing on maximal acceptable lift weight, wrist posture, psychophysical, and physiological responses in wafer-handling tasks”, Applied Ergonomics, Vol. 32, pp. 593-598 (2001).
Ciriello, V.M., “The effects of boxsize, vertical distance, and height on lowering tasks”, International Journal of Industrial Ergonomics, Vol. 28, pp. 61-67 (2001).
Ciriello, V.M., “The effects of box size,frequency and extended horizontal reach on maximum acceptable weights of lifting”, International Journal of Industrial Ergonomics, Vol. 32, pp. 115-120 (2003).
Ciriello, V.M., “The effects of box size, vertical distance, and height on lowing tasks for female industrial workers”, International Journal of Industrial Ergonomics, Vol. 35, pp. 857-863 (2005).
Cram, J.R., Kasman, G.S., and Holtz J., Introduction to Surface Electromyography, Aspen Publishers, Inc., Gaithersburg, Maryland(1998).
Danz M.E., “The effects of speed, frequency, and load on measured hand forces for a floor to knucjle lifting task.”, Ergonomics, Vol. 35, pp. 833-843 (1992).
Davis, K.G., and Seol, H., “Injury-induced kinematic compensations within the lower back: impact of non-lower back injuries”, Ergonomics, Vol. 48, pp. 135-149(2005).
De Luca, C.J., “The use of surface electromyography in Biomechanic”, Journal of Applied Biomechanics, Vol. 13, pp. 135-163 (1997).
Dempsey, P.G., “A survey of lifting and lowering tasks”, International Journal of Industrial Ergonomics Vol. 31, pp. 11-16 (2003).
Dolan, P., Adams, M.A., “Repetitive lifting tasks fatigue the back muscles and increase the bending moment acting on the lumbar spine”, Journal of Biomechanics, Vol. 31, pp. 713-721 (1998).
Drury, C.G., Law, C.H., Pawenski, C.S., “A survey of industrial box handling”, Human Factors, Vol. 24, pp. 553-566 (1982).
Ferguson, S.A., Marras, W.S., “A literature review of low back disorder surveillance measures and risk factors”, Clinical Biomechanics, Vol. 12, No. 4, pp. 211-216 (1997).
Gagnon, M., Delisle, A., and Desjardins, P., “Biomechanical differences between best and worst performances in repeated free asymmetrical lifts”, International Journal of Industrial Ergonomics, Vol. 29, pp. 73-83 (2002).
Garg, A., Saxena, U., “Container characteristics and maximum acceptable weight of lift”, Human Factors, Vol. 22, No. 4, pp. 487-495 (1980).
Habes, D., Carlson, W., and Badger, D., “Muscle fatigue associated with repetitive arm lifts: effects of height, weight and reach”, Ergonomics, Vol. 28, pp. 471-488 (1985).
Hagg, G.M., Kadefors, R., “EMG alterations at sustained contractions with special emphasis on applications in ergonomics” In: Kumar, S., Mital, A. (Eds.), Electromyo graphy in Ergonomics. Taylor & Francis, London, UK, pp. 1-177
Hermens, H.J., V.Bruggen, T.A.M., Baten, C.T.M., Rutten, W.L.C., and Boom, H.B.K., “The median frequency of the surface EMG power spectrum in relation to motor unit firing and action potential properties”, Journal of Electromtography and Kinesiology, Vol. 2, pp.15-25 (1992).
Hsiang, S.M., Brogmus, G.E., and Courtney, “Low back pain (LBP) and lifting technique – a review”, International Journal of Industrial Ergonomics, Vol. 19, pp.59-74 (1997).
Jäger, M., Lttmann, A., “Critical survey on the biomechanical criterion in the NIOSH method for the design and evaluation of manual lifting tasks”, International Journal of Industrial Ergonomics Vol. 23, pp. 331-337 (1999).
Kingma, I., de Looze, M.P., Toussaint, H.M., Klijnsma, H.G., and Bruijnen, T.B.M., “Validation of a full body 3-D dynamic linked segment model”, Human Movement Science, Vol. 15, pp. 833-860 (1996).
Kothiyal, k., Kayis, B., “Workplace layout for seated manual handling tasks: an electromyography”, International Journal of Industrial Ergonomics, Vol. 27, pp. 19-32 (2001).
Lee, C.L., Chen, H.C., Lou, S.Z., and Wu, H.C., “Effects of working height on upper extremity fatigue in repetitive tasks”, 16th World Congress on Ergonomics, July 10-14, Maastricht, the Netherlands(2006).
Lee, T.H., “Minimal acceptable handling time intervals for lifting and lowering tasks”, Applied Ergonomics, Vol. 34, pp. 629-634 (2003).
Lee, T.H., “Static lifting strengths at different exertion heights”, International Journal of Industrial Ergonomics, Vol. 34, pp. 263-269 (2004).
Lin, C.J., Ayoub, M.M., Bernard, T.M.,“Computer motion simulation for sagittal plane lifting activities”, International Journal of Industrial Ergonomics, Vol. 24, pp. 141-155 (1999).
Maines, J.M., and Reiser, R.F., “Ground reaction force bilateral asymmetries during submaximal sagittal plane lifting from the floor”, International Journal of Industrial Ergonomics, Vol. 36, pp. 109-117(2006).
Mital, A., “Comprehensive maximum acceptable weight of lift database for regular 8-hour work shifts”, Ergonomics, Vol. 27, No. 11, pp. 1127-1138 (1984).
Meyers, B.M., and Keir, P.J., “Trunk muscle response to lifting unbalanced loads with and without knowledge of centre of mass”, Clinical Biomechanics, Vol. 18, pp. 712-720(2003).
Mital, A., Nicholson, A.S., and Ayoub, M.M., A guide to manual materials handling, Taylor and Francis, London, UK (1993).
Nielsen, P.K., Andersen, L., and Jorgensen, K., “The muscular load on the lower back and shoulders due to lifting at different lifting heights and frequencies”, Applied Ergonomics, Vol. 29, No. 6, pp. 445-450 (1998).
NIOSH, Work Practices Guide for Manual Lifting, DHHS, Tech. Report No. 81-122, Cincinnati. (1981).
Nussbaum, M.A., Chaffin, D.B., Stump, B.S., Baker, G., and Foulke, J., “Motion times, hand forces, and trunk kinematics when using material handling manipulators in short-distance transfers of moderate mass objects”, Applied Ergonomics, Vol. 31, pp. 227-237 (2000).
OSHA, “Guidelines for Poultry Processing: Ergonomics for the Prevention of Musculoskeletal Disorders.” Occupational Safety and Health Administration, 3213-09N (2004).
Perkio-Makela, M., and Hentila, H., “Physical work strain of dairy farming in loose housing barns”, International Journal of Industrial Ergonomics, Vol. 35, pp. 57-65(2005).
Plamondon, A., Gagnon, M., and Desjardins, P., “Validation of two 3-D segment models to calculate the net reaction forces and moments at the L5/S1 joint in lifting”, Clinical Biomechanics, Vol. 11, pp. 101-110 (1996).
Shin, H.J., Kim, J.Y., “Measurement of trunk muscle fatigue during dynamic lifting and lowering as recovery time changes”, International Journal of Industrial Ergonomics, Vol. 37, pp. 545-551 (2007).
Shin, Y.I., Kimitaka, N., Hideo, Y., and Tatsuyuki, O., “Differential angle-dependent modulation of the long-latency stretch reflex responses in elbow flexion synergists”, Journal of Electromyography and Kinesiology, Vol.10, pp. 135–142 (2000).
Snook, S.H. “The design of manual handling tasks”, Ergonomics, Vol. 21, pp. 963-985 (1978).
Strasser, H., Electromyography of upper extremity muscles and ergonomic applications. In: Kumar, S., Mital, A. (Eds.), Electromyography in Ergonomics. Taylor and Francis, London, New York, pp. 183-226 (1996).
Strasser, H., Müller, K.-W., “Favorable movements of the hand-arm system in the horizontal plane assessed by electromyographic investigations and subjective rating”, International Journal of Industrial Ergonomics, Vol. 23, pp. 339-347 (1999).
Strasser, H., Keller, E., “Local muscular strain dependent on the direction of horizontal arm movements”, Ergonomics, Vol. 32, pp. 899-910 (1989).
Waters, T.R., Putz-Anderson, V., and Garg, A., Applications Manual for the Revised NIOSH Lifting Equation, Department of Health and Human Services, Cincinnati, OH (1994).
Wang, M. J., Chung, H. C. and Chen, H. C., ” The Effect of Handle Angle on MAWL, Wrist Posture, RPE, and Heart Rate.” Human Factors, 553-565 (2000).
Westgaard, R.H., and Winkel, J., “Guidelines for occupational musculoskeletal load as a basis for intervention: a critical review”. Appl. Ergon. 27, 79-88(1996).
Wu, S.P., “Maximum acceptable weight of lift by Chinese experienced male manual handlers”, Applied Ergonomics, Vol. 28, pp. 237-244 (1997).
Wu, S.P., “Maximum acceptable weights for asymmetric lifting of Chinese females”, Applied Ergonomics, Vol. 34, pp. 215-234 (2003).
Wu, S.P., Chen, J.P., “Effect of the adjustment period on psychophysically determined maximum acceptable weight of lift and the physiological cost”, International Journal of Industrial Ergonomics, Vol. 31, pp. 287-294 (2003).
Xu, X., Mirka, G.A., and HSiang, M.S., “The effects of obesity on lifting performance”, Applied Ergonomics, Vol. 39, pp. 93-98 (2008).
Yoon, H., Smith, J.L., “Psychophysical and physiological study of one-handed and two-handed combined tasks”, International Journal of Industrial Ergonomics, Vol. 24, pp. 49-60 (1999).
Zhang, X., Nussbaum, M.A., and Chaffin, D.B., “Back lift versus leg lift: an index and visualization of dynamic lifting strategies”, Journal of Biomechanics, Vol. 33, pp. 777-782 (2000).